Embedded Motion Control 2014

Guide towards the assignment
'A-MAZE-ING PICO'

---

Introduction

This course is about software design and how to apply this in the context of autonomous robots. The accompanying assignment is about applying this knowledge to a real-life robotics task in which ROS will be the standard software framework.

Course Schedule and Lecture Slides

Lectures will be given on Fridays from 13.45 - 15.30 in Gemini-Zuid 3A10. The course schedule is as follows:

April, 25th	Introduction	Assignment and basic computer setup ‎
May 2nd	C++ and ROS Concepts	Image processing using OpenCV (2013)
May 9th	Navigation (slides, survey)	Software design
May 16th	Corridor competition
May 23th	Software design for Real-Time by Herman Bruyninckx (2013)
June 6th		AMIGO's software architecture: performing a RoboCup Challenge
June 13th	!!! No lecture !!!
June 20th	Student presentations
June 27th	Final competition

Pico test schedule

In order to test your software on the Pico robot, each group has one one hour time slot a week available. You can reserve your test slot in the table below. If you record bag-files, make sure to upload them to the svn on time, so the next group does not have to wait.

N.B. please charge Pico when you are not driving around, so there will be no downtime because of empty batteries.

Week 19

Date	Time	Group
08-05-2014	9.00-10.00	Group 9
08-05-2014	10.10-11.10	Group 4
08-05-2014	11.20-12.20
08-05-2014	12.30-13.30	Group 11
08-05-2014	13.40-14.40
08-05-2014	14.50-15.50
08-05-2014	16.00-17.00
09-05-2014	9.00-10.00	Group 2
09-05-2014	10.10-11.10	Group 12
09-05-2014	11.20-12.20	Group 5
09-05-2014	12.30-13.30	Group 7
09-05-2014	13.40-14.40	Group 1
09-05-2014	14.50-15.50	Group 3
09-05-2014	16.00-17.00	Group6

Week 20

Date	Time	Group
13-05-2014	9.00-10.00
13-05-2014	10.10-11.10	Group 12
13-05-2014	11.20-12.20
13-05-2014	12.30-13.30
13-05-2014	13.40-14.40
13-05-2014	14.50-15.50
13-05-2014	16.00-17.00	Group 02
15-05-2014	9.00-10.00	group 07
15-05-2014	10.10-11.10	Group 11
15-05-2014	11.20-12.20	group 05
15-05-2014	12.30-13.30	group 09
15-05-2014	13.40-14.40	group 10
15-05-2014	14.50-15.50
15-05-2014	16.00-17.00	Group 08

Week 21

Date	Time	Group
21-05-2014	9.00-10.00
21-05-2014	10.10-11.10
21-05-2014	11.20-12.20
21-05-2014	12.30-13.30
21-05-2014	13.40-14.40
21-05-2014	14.50-15.50	Group 2
21-05-2014	16.00-17.00	Group 8
22-05-2014	9.00-10.00	Group 12
22-05-2014	10.10-11.10
22-05-2014	11.20-12.20	Group 5
22-05-2014	12.30-13.30	Group 9
22-05-2014	13.40-14.40	Group 11
22-05-2014	14.50-15.50
22-05-2014	16.00-17.00	Group 1

Week 22

Date	Time	Group
27-05-2014	9.00-10.00	Group 12
27-05-2014	10.10-11.10
27-05-2014	11.20-12.20
27-05-2014	12.30-13.30
27-05-2014	13.40-14.40
27-05-2014	14.50-15.50	Group 2
27-05-2014	16.00-17.00	Group 8
28-05-2014	9.00-10.00	Group 11
28-05-2014	10.10-11.10	Group 7
28-05-2014	11.20-12.20	Group 6
28-05-2014	12.30-13.30	Group 9
28-05-2014	13.40-14.40	Group 10
28-05-2014	14.50-15.50	Group 3
28-05-2014	16.00-17.00	Group 1

Week 23

Date	Time	Group
04-06-2014	9.00-10.00
04-06-2014	10.10-11.10
04-06-2014	11.20-12.20
04-06-2014	12.30-13.30	Group 10
04-06-2014	13.40-14.40	Group 4
04-06-2014	14.50-15.50
04-06-2014	16.00-17.00	Group 2
05-06-2014	9.00-10.00	Group 7
05-06-2014	10.10-11.10	Group 6
05-06-2014	11.20-12.20	Group 5
05-06-2014	12.30-13.30	Group 9
05-06-2014	13.40-14.40	group 1
05-06-2014	14.50-15.50	Group 3
05-06-2014	16.00-17.00	Group 8

Week 24

Date	Time	Group
11-06-2014	9.00-10.00	Group 4
11-06-2014	10.10-11.10	Group 11
11-06-2014	11.20-12.20	Group 2
11-06-2014	12.30-13.30	Group 7
11-06-2014	13.40-14.40	Group 5
11-06-2014	14.50-15.50
11-06-2014	16.00-17.00	Group 1
12-06-2014	9.00-10.00	Group 12
12-06-2014	10.10-11.10	Group 6
12-06-2014	11.20-12.20	Group 9
12-06-2014	12.30-13.30	Group 10
12-06-2014	13.40-14.40	N/A
12-06-2014	14.50-15.50	Group 3
12-06-2014	16.00-17.00	Group 8

Week 25

Date	Time	Group
18-06-2014	9.00-10.00	Group 11
18-06-2014	10.10-11.10	groep 1
18-06-2014	11.20-12.20	Group 12
18-06-2014	12.30-13.30
18-06-2014	13.40-14.40	Group 5
18-06-2014	14.50-15.50
18-06-2014	16.00-17.00	Group 4
19-06-2014	9.00-10.00	Group 07
19-06-2014	10.10-11.10	Group 6
19-06-2014	11.20-12.20	group 2
19-06-2014	12.30-13.30	group 9
19-06-2014	13.40-14.40	Group 10
19-06-2014	14.50-15.50	Group 03
19-06-2014	16.00-17.00	Group 8

Week 26

Date	Time	Group
25-06-2014	9.00-10.00	Group 11
25-06-2014	10.10-11.10	Group 4
25-06-2014	11.20-12.20	Group 2
25-06-2014	12.30-13.30	Group 07
25-06-2014	13.40-14.40	Group 5
25-06-2014	14.50-15.50	Group 12
25-06-2014	16.00-17.00	Group 8
26-06-2014	9.00-10.00	Group 12
26-06-2014	10.10-11.10	Group 6
26-06-2014	11.20-12.20
26-06-2014	12.30-13.30	group 9
26-06-2014	13.40-14.40	Group 10
26-06-2014	14.50-15.50	Group 03
26-06-2014	16.00-17.00	Group 01

Goal

The goal of the assignment is to get the real-time concepts in embedded software design operational.

The concrete task that has to be solved is to let the PICO robot find his way out of a maze. The final demonstration by each participating group of 4-5 students will be performed during a contest, the winner of which is the group that exits the maze in the shortest amount of time. To prepare for this competition the following guidelines have to be considered:

• to test with PICO and to prepare for the final contest, a simulator will be made available that mimics the in and outputs to the real robot. Specifics of this simulator will be presented in the first lecture on September 4th
• the maze of the final competition will be constructed just before the competition. The maze presented in the simulator is therefore different from the real one used in the final contest.
• both on the real and simulated PICO robot, three sources of sensor information will be available to perceive the environment and to derive the state of the robot:
  • laserdata provided by the forward pointing laser scanner,
  • images captured by the monocular camera,
  • odometry provided by the base controller
• the robot can be actuated by sending information to the base controller
• during the final contest, it is highly imperative that the PICO robot refrains from colliding with the walls in the maze. Colliding with the walls will result in severe time-penalties.
• the walls of the maze will contain several types of pointers to the exit, which can potentially help PICO to speed up execution of the task Click here for a pdf file containing the arrow we will use. We also captured PICO's camera topics in a bag file while the robot was looking at the arrow. You can play this bag-file as follows:

  rosbag play 2013-10-08-15-35-04.bag

  The topics /pico/camera and /pico/camera_info should then become available. For example, while playing the bag file, use

  rosrun image_view image_view image:=/pico/asusxtion/rgb/image_color

  to view the camera images. If your laptop becomes to slow to handle the stream of images, you can also play the bag-file at a lower rate. For example, use

  rosbag play 2013-10-08-15-35-04.bag -r 0.5

  to play it at half the recorded speed.

Corridor Competition

An intermediate review will be held on May 16th, 13.45h at the RoboCup soccer field. During this challenge, called the corridor competition the students have to let the robot drive through a corridor and then take the first exit. The precise location of this exit will not be given in advance. Some facts:

The exit can be either left or right It is not known beforehand how far the exit is located from the start (somewhere between 1 and 10 meters) It is not known beforehand if the opposing end wall (on the far end) will be open or closed The walls are approximately parallel to each other Note: the walls might not be perfectly straight The distance between the walls is not known in advance, but will be reasonable (somewhere between 0.5 and 1.5 meters). The distance between the walls will be fairly constant throughout the corridor, 'fairly' meaning that we build the corridor by hand, and the distance may change a little along the corridor. PICO will start with its laser range finder between the walls PICO will be approximately facing the end of the corridor. (Notice: approximately, so don't just drive forward for n seconds!) At the exit, the finish line is located approximately 30 cm from the side of the corridor (Notice: approximately, so don't just drive forward for 30 cm!). The walls that can be used to align PICO will be a little bit longer. You have finished the assignment if PICO did not drive into walls, took the correct turn and the entire rear wheel is across the finish line. Hitting the wall will result in 0 points!

Maze Competition

The final competition will be held on June 27th, 13.45h at the RoboCup soccer field. The goal of this competition is to let PICO autonomously drive through a maze and find the exit. Some facts:

• Where and when:
  • Fri June 27, 13.45h - 15.30h
  • Location: RoboCup Soccer field, GEM-N
• Maze characteristics:
  • Exact location of the entrance and exit are unknown, but they will be on the boundaries of the maze
  • walls are approximately parallel to each other
  • distance between walls is approximately constant throughout the maze, and large enough for the robot to perform complete rotation without hitting the walls
  • There may be corners, T-junctions and crossings (+)
  • There will NOT be any loops in the maze
• Arrows:
  • On some T-junctions there is an arrow pointing to the side that leads to the exit (either left or right, and the arrow will never point in wrong direction)
  • Arrows are located on the highest point of the wall, i.e., clearly visible for the camera
• Start, goal and limits:
  • PICO will start with its laser range finder within the boundaries of the maze
  • You have finished the assignment if PICO did not drive into walls, found the exit and the entire rear wheel is across the finish line.
  • There will be a maximum translational velocity of 0.2 m/s (X and Y combined!) and maximum rotational velocity of 1.0 rad/s
• Scoring:
  • You have 2 attempts (= maximum one restart)
  • restart means:
    • PICO restarts at beginning of maze
    • MAZE time (= time used for scoring) is reset, BUT
    • TOTAL time keeps running
  • You have a total of 7 minutes for both attempts
  • Hit wall = that attempt fails
  • PICO standing still for 30 seconds = that attempt fails
  • No second attempt if first attempt was successful

Hardware

The mobile, holonomic PICO robot with Asus Xtion camera and laser range finder with a working ROS interface. In addition, we provide a PICO simulator for offline testing.

Getting Started

To get started, please do the tutorials on the Tutorial Page. Please note:

• Do all tutorials, and all steps. Missing one step may cause a different behavior or incorrect working system later. If something is not working as expected, make sure you correctly did all previous steps.
• Of course, things may still go wrong. If so, do not hesitate to contact us.

• See Using Pico for a quick overview of how to use Pico.

FAQ

Here you can find a collection of Frequently Asked Questions. Please check this page before contacting the student assistants or the tutors! If you find any issues or questions you had to deal with, please add them as well so your colleagues don't run into the same problems.

Group Wiki Pages

Group 1 - visit wiki - Tutor: Sjoerd van den Dries

Group 2 - visit wiki - Tutor: Luis Ferreira

Group 3 - visit wiki - Tutor: Janno Lunenburg

Group 4 - visit wiki - Tutor: Sjoerd van den Dries

Group 5 - visit wiki - Tutor: Luis Ferreira

Group 6 - visit wiki - Tutor: Janno Lunenburg

Group 7 - visit wiki - Tutor: Sjoerd van den Dries

Group 8 - visit wiki - Tutor: Luis Ferreira

Group 9 - visit wiki - Tutor: Janno Lunenburg

Group 10 - visit wiki - Tutor: Yanick Douven

Group 11 - visit wiki - Tutor: Ramon Wijnands

Group 12 - visit wiki - Tutor: Yanick Douven

Group 13 - visit wiki - Tutor: Ramon Wijnands

Group Final Presentations

To be added...

Contact Details

In case of questions related to working with the real Jazz robot or general ROS/C++ questions, please contact Yanick. For questions regarding the simulator or the svn, please contact Sjoerd.

Student Assistent

Yanick Douven - y dot g dot m dot douven at student dot tue dot nl

Ramon Wijnands - r dot w dot j dot wijnands at student dot tue dot nl

Tutors

Sjoerd van den Dries - S dot v dot d dot Dries at tue dot nl

Luis Ferreira - L dot F dot Bento dot Ferreira at tue dot nl

Janno Lunenburg - J dot J dot M dot Lunenburg at tue dot nl

Yanick Douven - y dot g dot m dot douven at student dot tue dot nl

Ramon Wijnands - r dot w dot j dot wijnands at student dot tue dot nl