Design Methodology
Jump to navigation
Jump to search
| Project Trajectory | Project Pages | ||
|---|---|---|---|
| Home | Design Method(s) | Problem Definition | Sliding Doors |
| Planning and Milestones | Concepts Chosen | Background Research | Chimney |
| Meetings | Requirements | Chimney to Cubby | |
| Personal Logs | Brainstorm | Cubby to Person | |
Process
A design proces is based on iterations. One should start with defining a problem, which is in our case getting a package from a drone to the person it is addressed to. The next step is to do research about the subject and related matters. With this knowledge one can start brainstorming. With the ideas generated in these sessions an approach can be chosen, which is where we are at. Once the approach is chosen the prototyping starts, after which it will be tested. Based on reflections and new knowledge from the testing a new problem can be defined after which the cycle starts again. This cycle can be repeated until a satisfactory result has been achieved.
