Embedded Motion Control 2013 Group 1

From Control Systems Technology Group
Revision as of 20:32, 27 September 2013 by S121719 (talk | contribs) (→‎Situation)
Jump to navigation Jump to search

Group Info

Name: Abbr: Student id: Email:
Groupmembers (email all)
Paul Raijmakers PR 0792801 p.a.raijmakers@student.tue.nl
Pieter Aerts PA 0821027 p.j.m.aerts@student.tue.nl
Wouter Geelen WG 0744855 w.geelen@student.tue.nl
Frank Horstenbach FH 0792390 f.g.h.hochstenbach@student.tue.nl
Niels Koenraad NK 0825990 n.j.g.koenraad@student.tue.nl
Tutor
Jos Elfring n.a. n.a. j.elfring@tue.nl

Meetings

  1. Meeting - 2013-09-04
  2. Meeting - 2013-09-11
  3. Meeting - 2013-09-18
  4. Meeting - 2013-09-25

(Global) Planning

Week 1 (2013-09-02 - 2013-09-08)

  • Installing Ubuntu 12.04
  • Installing ROS Fuerte
  • Following tutorials on C++ and ROS.
  • Setup SVN

Week 2 (2013-09-09 - 2013-09-15)

  • Discuss about splitting up the team by 2 groups (2,3) or 3 groups (2,2,1) to whom tasks can be appointed to.
  • Create 2D map using the laser scanner.
  • Start working on trying to detect walls with laser scanner.
  • Start working on position control of Jazz (within walls i.e. riding straight ahead, turning i.e. 90 degrees).
  • Start thinking about what kind of strategies we can use/implement to solve the maze (see usefull links).

Week 3 (2013-09-16 - 2013-09-22)

  • Start work on trying to detect openings in walls.
  • Start working on code for corridor competition.
  • Continue thinking about maze solving strategy.

Week 4 (2013-09-23 - 2013-09-29)

  • Decide which maze solving strategy we are going to use/implement.

Week 5 (2013-09-30 - 2013-10-06)

  • To be determined.

Week 6 (2013-10-07 - 2013-10-13)

  • To be determined.

Week 7 (2013-10-14 - 2013-10-20)

  • To be determined.

Week 8 (2013-10-21 - 2013-10-27)

  • To be determined.

Progress

Week 2

State diagram made of nodes Localisation and Situation

Software architecture

Software architecture.jpg

IO Data structures

# Datatype Published by Topic Description
A LaserScan Pico /pico/laser Laser scan data. For info click here
B Int32MultiArray pico_line_detector /pico/line_detector/lines Every 4 elements represent a line element i.e. [x,y,x',y',...] with a maximum of n lines. Hence the array will at most contain 20 elements. The coordinates represent a line in the cartesian coordinate system with Pico being the center e.g. (0,0). The x- and y-axis in centimeters and the x-axis is in front/back of Pico while the y-axis is left/right. Further the coordinate system turns along with Pico.
C Int32MultiArray pico_line_detector /pico/line_detector/lines Every 4 elements represent a line element i.e. [x,y,x',y',...] with a maximum of n lines. Hence the array will at most contain 20 elements. The coordinates represent a line in the cartesian coordinate system with Pico being the center e.g. (0,0). The x- and y-axis in centimeters and the x-axis is in front/back of Pico while the y-axis is left/right. Further the coordinate system turns along with Pico.
D Custom message (3x booleans, 1x Float32) The 3 booleans represent possible driving directions at the upcoming desicion point. The float represents the distance to that waypoint
E
F Custom message (3x Float32) first float is the average angle (in radians) between the 2 lines at the sides of pico. The second is the distance to the left hand detected line, the third is the distance to the right hand detected line
G Custom message (2x Float32)

Line detection

The pico_line_detection node is responsible for detecting lines with the laser scanner data from Pico. The node retrieves the laser data from the topic /pico/laser. The topic has a standard ROS sensor message datatype namely LaserScan. The datatype includes several variables of interest to us namely;

Definition of the x- and y-axis of Pico
  1. float32 angle_min which is the start angle of the scan in radian
  2. float32 angle_max the end angle of the scan in radian
  3. float32 angle_increment the angular distance between measurements in radian
  4. float32[] ranges a array with every element being a range, in meters, for a measurement

Using the above data we can apply the probabilistic Hough line transform to detect lines. The detected lines are then published to the topic /pico/line_detector/lines.

Each line is represented by 2 points in the Cartesian coordinate system which is in centimeters. In the coordinate system Pico is located in the center i.e. at (0,0) and the world (coordinate system) moves along with Pico. The x-axis is defined to be front to back while the y-axis is defined to right to left.

Hough transform

Line expressed Cartesian coordinate system with [math]\displaystyle{ (x,y)\,\! }[/math] and in Polar coordinate system with [math]\displaystyle{ (r, \theta)\,\! }[/math]

The Hough transform is a algorithm which is able to extract features from e.g. a image or a set of points. The classical Hough transform is able to detect lines in a image. The generalized Hough transform is able to detect arbitrary shapes e.g. circles, ellipsoids. In our situation we are using the probabilistic Hough line transform. This algorithm is able to detect lines the same as the classical Hough transform as well as begin and end point of a line.

How it works. Lines can either be represented in the Cartesian coordinates or Polair coordinates. In the first they are represented in [math]\displaystyle{ y = ax + b\,\! }[/math], with [math]\displaystyle{ a\,\! }[/math] being the slope and [math]\displaystyle{ b\,\! }[/math] being the crossing in the y-axis of the line. Lines can however also be represented in Polair coordinates namely;

[math]\displaystyle{ y = \left(-{\cos\theta\over\sin\theta}\right)x + \left({r\over{\sin\theta}}\right) }[/math]

which can be rearranged to [math]\displaystyle{ r = x \cos \theta+y\sin \theta\,\! }[/math]. Now in general for each point [math]\displaystyle{ (x_i, y_i)\,\! }[/math], we can define a set of lines that goes through that point i.e. [math]\displaystyle{ r({\theta}) = x_i \cos \theta + y_i \sin \theta\,\! }[/math]. Hence the pair [math]\displaystyle{ (r,\theta)\,\! }[/math] represents each line that passes by [math]\displaystyle{ (x_i, y_i)\,\! }[/math]. The set of lines for a given point [math]\displaystyle{ (x_i, y_i)\,\! }[/math] can be plotted in the so called Hough space with [math]\displaystyle{ \theta\,\! }[/math] being the x-axis and [math]\displaystyle{ r\,\! }[/math] being the y-axis. For example the Hough space for the point [math]\displaystyle{ (x,y) \in \{(8,6)\} }[/math] looks as the image below on the left. The Hough space for the points [math]\displaystyle{ (x,y) \in \{(9,4),(12,3),(8,6)\} }[/math] looks as the image on the right.

Hough Space 1.jpg
Hough Space 2.jpg

The three plots intersect in one single point namely [math]\displaystyle{ (0.925,9.6)\,\! }[/math] these coordinates are the parameters [math]\displaystyle{ (\theta,r)\,\! }[/math] or the line in which [math]\displaystyle{ (x_{0}, y_{0})\,\! }[/math], [math]\displaystyle{ (x_{1}, y_{1})\,\! }[/math] and [math]\displaystyle{ (x_{2}, y_{2})\,\! }[/math] lay. Now we might conclude from this that at this point there is a line i.e. to find the lines one has to find the points in the Hough space with a number of intersections which is higher then a certain threshold. Finding these points in the Hough space can be computational heavy if not implemented correctly. However there exists very efficient divide and conquer algorithms for 2D peak finding e.g. see these course slides from MIT.

Psuedo algorithm

algorithm HoughTransform is
    input: 2D matrix M
    output: Set L lines with the pair (r,theta)

    define 2D matrix A being the accumelator with size/resolution of theta and r

    for each row in M do
        for each column in M do
            if M(row,column) above threshold
                for each theta in (0,180) do
                    r ← row * cos(theta) + column * sin(theta)
                    increase A(theta,r)

    look at boundary, the center row and the center column of A
    p ← the global maximum within

    if p is a peak do
        add pair (row,column) to L
    else
        find larger neighbour
        recurse in quadrant

    return L

In action

Simulation
Ecm01, pico line detection - YouTube.png
Practice

Situation

Situation first indexed all different types of lines.
The first choose is the direction of a line.
The line can be in the driving direction or perpendicular to the driving direction.
===== in driving direction =====
Lines are indexed on base of it's position.
A line at the left side can be behind Pico, line-type L1, next to Pico, line type L2 or in front of Pico, Line type L3.
For lines at the right it's the same except the line types are R1, R2 and R3.
===== perpendicular to driving direction ======
These lines are also indexed on base of it's position.
A line which is only located to the left of Pico is line-type SL, only to the right is of type SR.
If the line crosses the driving direction it is indexed as S0.
The next image makes the location of the different line-types clear.
Linetype.png
After the lines are indexed the value of the 3 booleans is desided.
The following flowchart shows how the dessisons are made.
Situation.png

Localisation

Reasoning

Motion

Software development

Theory

include hough transform here

Usefull links / References

Retrieved from "https://dsdwiki.wtb.tue.nl/index.php?title=Embedded_Motion_Control_2013_Group_1&oldid=5802"