Mobile Robot Control 2020 Group 8

Group information

Group Members

Name	Student Number
J.J.W. Bevers	0904589
J. Fölker	0952554
B.R. Herremans	0970880
L.D. Nijland	0958546
A.J.C. Tiemessen	1026782
A.H.J. Waldus	0946642

Meeting Summaries

A logbook with a summary of the contents of each meeting is documented and can be found here.

Course description

Introduction

Figure 1: PICO.

As is proven during the current situation concerning the COVID-19 pandemic, our healthcare system is of high importance. However, there are shortcomings for which an efficient solution is required. At the time, hospitals are occupied by many patients. Therefore, doctors and nurses have limited time for human-to-human contact with patients. By automating simple tasks, doctors and nurses have more time for contact with patients. An option is to use an autonomous embedded robot to assist in everyday tasks such as getting medicine, moving blood bags or syringes and getting food and drinks. During this course, software for such an autonomous robot is developed. The goal is to complete two different challenges in a simulated environment: the Escape Room Challenge and the Hospital Challenge.

PICO

The mobile robot used is called PICO and is shown in Figure 1. PICO consists of multiple components. This year's edition of the course will be completely based on the PICO simulator (as developed by the project team) and will, thus, not contain the implementation of the software on the actual robot. Only the relevant components for simulations are, therefore, briefly explained. For actuation purposes, PICO has three Omni-wheels which make for a holonomic base. A Laser Range Finder (LRF) is used by PICO to scan its surroundings, providing PICO with distance data. Furthermore, the wheel encoders data is used to keep track of PICO's translations and rotation (odometry).

Figure 2: Example of the map used for the Escape Room Challenge (left) and the Hospital Challenge (right).

Escape Room Challenge

The goal of this challenge is to navigate PICO, through a corridor, out of a rectangular room of unknown dimensions without bumping into walls. An example of an environment map that might be encountered during this challenge is shown on the left side of Figure 2. PICO has an unknown initial position within this room. Thus, PICO first needs to detect and recognize the exit. When the exit is found, PICO has to exit the room as fast as possible by moving through the corridor. The challenge is finished when the rear wheels of PICO cross the finish line entirely. In the Section Escape Room Challenge, the approach is explained in more detail. Here, the algorithms used and its implementations are explained. Moreover, the results of the challenge are shown and discussed.

Hospital Challenge

This challenge represents an example of the application of an autonomous robot in a more realistic environment. In this challenge, PICO has to operate in a hospital environment. The environment will consist of multiple rooms, a hallway and an unknown number of static- and dynamic objects. In the rooms, cabinets are present that contain medicine. In this challenge, PICO will first need to recognize its initial position in the known environment. Next, PICO has to plan a path to various cabinets in a predefined order, representing the collection and delivery of medicine. When executing this path, PICO needs to prevent collisions with walls and static- and dynamic objects. An example environment is shown on the right side of Figure 2. In Section Hospital Challenge, more information will be provided.

Design Document

In the design document, a generic approach for the Escape Room Competition and the Hospital Competition is introduced. Requirements are proposed, which are clarified by means of specifications. Based on these, a finite state machine is designed. In each state, groups of functions are proposed. This functionality is, in turn, structured in an information architecture which covers the components and the interfaces. Undoubtedly, throughout the remainder of the course, this document needs to be updated, but its current content functions more as a guideline. Since the Escape Room Competition is the first challenge, functional specifics may be more focused towards this goal. And because software design is use-case dependent, for the Hospital competition the current approach will need to be adapted and improved. The design document deliverable can be found here.

Escape Room Challenge

In this section, the strategy for the Escape Room Challenge is discussed, as well as the algorithms that are used. The software for this challenge can be roughly divided into three main parts: the finite state machine, the potential field algorithm and the exit detection algorithm. These will be covered next. Moreover, for testing, an extra output window is created in which the behaviour of PICO with the created software is shown. This output window will also be used to demonstrate how the different algorithms work.

Finite state machine

A Finite State Machine (FSM) that describes the robot's behavioral scheme is designed, forming the basis of the software architecture. The FSM describes which states can be reached from a certain state, given the response of that state to some input. For the Escape Room Challenge, a total of four behavorial states are implemented as can be seen in Figure 4. The states of the FSM are defined as followed:

Initializing: PICO performs an initial scan of its surroundings and searches for the exit. If the exit is detected, the detection algorithm will place a target in the middle of the beginning of the exit corridor and the state transitions to the executing state. If the exit is not detected after the first rotation of 360 degrees, the state transitions to the exploring state.

Exploring: A potential field algorithm is used to explore the environment. Untill the detection algorithm has located the exit, PICO will drive in a straight line untill it reaches a wall. When a wall is reached, the repulsive field of the wall becomes stronger than the atrractive field that is placed 1m in front of PICO, making the robot rotate away from that wall. This movement continues untill the exit is detected

Executing: In the executing state, an attractive field is placed on the location that the detection algorithm has indicated as a target. The vector that follows from the combined attractive and repulsive field is translated into translational and rotational velocities, which are used as input for the robot motion. Multiple targets can be identified in the executing state, for example the beginning of the exit corridor and the end of the exit corridor. When PICO has reached the final target and it no longer detects any walls, the state transitions to the reached state.

Reached: After the path execution has finished and PICO has reached the end of the exit corridor, PICO stops moving as it has reached its final target location.

Figure 4: Finite State Machine.

Potential field algorithm

During the Escape Room Challenge, the direction and magnitude of the velocity of PICO are guarded by the potential field algorithm. The potential field within a mapped environment consists of a rejective field and an attractive field. An example of a gradient field from the rejective field is shown in Figure 6. For the Escape Room Challenge, however, it is chosen not to use a world map as this would unnecessarily overcomplicate computations. Therefore the rejective field vector at PICO’s current position is computed based on all current LRF data, such that the gradient with respect to PICO’s local coordinate frame based on its current measurements is computed. For the attractive field, the current goal relative to PICO’s local coordinate frame is required. This goal is provided by the exit detection algorithm. The vector corresponding to the gradient of the attractive field is computed by means of a convex parabola in the XY-plane with respect to the local coordinate frame of PICO, which has its minimum at the goal relative to PICO’s local coordinate frame. Both the rejective and the attractive field vectors are normalized to have a magnitude of 1. This avoids the effect that the rejective field is stronger when PICO observes more datapoints at a certain moment, which could give a distorted effect in the magnitude of the rejective field gradient vector.

Figure 6: Example of rejective field gradients.

The normalized field vectors are then used to control the motion of PICO. In order for PICO to always be able to see the goal, and thus obtain an estimation of the goal relative to PICO's coordinate frame, the orientation of PICO is controlled such that it always aligns with the direction of the attractive field vector. This control is a feedback loop, with the error equal to the angle of the attractive field vector with respect to PICO’s X-axis, and as controller a simple gain.

The velocity in X and Y with respect to PICO’s local coordinate frame is actuated using both the normalized attractive and repulsive field vectors. In order to combine these vectors, the minimum distance to an object “Dmin” is measured. This measurement is used to compute the contributing factors of the attractive and repulsive field as follows. When “Dmin” is smaller than a tuneable tolerance “Dmint”, these factors are multiplied with the corresponding field vectors and then the average is used. This way the rejective field is stronger when PICO is near a wall. The 1/x function allows to drive fairly close to a wall but not collide with it. Furthermore when “Dmin” is larger than the tolerance “Dmint”, The forward vector component in X- and Y-direction consists of the attractive field vector and repulsive field vector with factor 1.

Figure 7: Contribution factors of rejective and attractive field vectors.

This thus yields a new vector relative to PICO’s local coordinate frame. This vector can still have a magnitude smaller or larger than 1. When the magnitude of this vector is larger than 1, it is limited to 1, such that the X and Y components of this vector can be multiplied with PICO’s maximum velocity such that the maximum velocity is never exceeded, but it still enables PICO to drive more slowly, for example when moving through a narrow corridor in which the rejective field is very strong.

During testing, it was noticed that the exit detection algorithm can sometimes rapidly switch between detected targets relative to PICO. When this rapid switching occurs, it is unwanted that PICO rapidly adjusts its direction. Therefore when this rapid switching is detected, the vector corresponding to the gradient of the attractive field is filtered using a low-pass filter with relatively low bandwidth. When no switching is detected, thus in the regular case, this vector is filtered using a low-pass filter with a relatively high bandwidth allowing for faster adjustment of this vector.

Of course, it is possible that at a certain time instance PICO receives a relative goal. At the next time instance, it might be possible that the exit detection algorithm does not provide a goal. Therefore, each time the potential field algorithm obtains a goal, it captures the orientation of its local coordinate frame with respect to the world coordinate frame based on odometry. Furthermore, the distance to the goal relative to this local coordinate frame is logged. In the next iteration, when the potential field algorithm is called with a flag “0”, corresponding to the case that at this call no relative goal is provided, PICO uses the odometry data to move to the last known goal with respect to the last known coordinate frame. During this motion, PICO maintains the orientation of the last known attractive field vector when a goal was still provided. Of course, when the distance to its last known coordinate frame increases, the position error increases. Nonetheless, when the exit detection algorithm initially provides a goal which lies 1 [m] in front of PICO, and then can no longer detect this relative goal, PICO will move forward and measure the travelled distance using the odometry until it has travelled the distance of 1 [m] with respect to PICO’s local coordinate frame when a goal was provided. When this distance has been travelled, PICO stops moving. This way some additional redundancy has been built in, such that PICO can still move when no goal can be provided at a certain time instance.

Exit detection algorithm

For the Escape Room Challenge, it is not required to compute PICO's global location and orientation, i.e. its global pose, within the room. In fact, this is not even possible, because the dimensions of the room are not known and the room may also not be perfectly rectangular. Even if it were, it is unlikely that it would be possible to uniquely compute the robot pose from the LRF data. Since the mere goal of this challenge is to drive out of the room via the corridor, the exit detection algorithm must detect where the exit is relative to PICO's current position, i.e. the target. This information then serves as an input to the potential field algorithm to compute the attractive field. Note that this algorithm, thus, serves as a means of meeting (border-)requirement 'Identify Exit'.

The following considerations are taken into account:

• Looking forward, it is decided that it is preferred to already implement as much intelligence as possible which may later function as part of the localization component of the software for the final Hospital Challenge.
• In order to feed the potential field algorithm effectively, i.e. in such a way that it is expected to yield a smooth motion, it is also preferred to first compute the center position of the start of the corridor. Only once PICO is positioned sufficiently in front of (or in) the corridor, the center position of the end of the corridor should be computed. If, for example, the target were always placed at the end of the corridor, guided by means of the potential field algorithm, PICO will first drive on a path deemed for collision with a wall. Only when sufficiently close to the wall, PICO would be guided along the wall, towards the corridor.
• Moreover, a significantly accurate estimate of these positions is required.

For this reason, instead of simply detecting gaps in the LRF data, the exit detection algorithm must be able to:

i) divide the LRF data into segments belonging to seperate walls,

ii) fit lines on these walls (to minimize the influence of LRF data noise on PICO's perception),

iii) use these fits to compute corners and edges, and

iv) use theses corners and edges to compute the target position.

The exit detection algorithm, therefore, incorporates data pre-processing, data segmentation, line fitting, corners and edges computations, and target computations. These individual parts of the algorithm will be further elaborated below.

Data pre-processing

Firstly, the LRF data is pre-processed by simply filtering out data that lies outside of the LRF range, i.e. below its smallest and above its largest measurable distances, 0.01 and 10 m, respectively. It is then converted to Cartesian coordinates relative to PICO's local frame (see Figure x):

where ρ_i is the measured distance and θ_i the corresponding angle. Note that the index i starts at 0 (and, thus, ends at 999).

Figure x: PICO's local frame and conventions.

Data segmentation

The procedure that is applied to divide the LRF data into segements is inspired by the famous image processing technique, split and merge segmentation. It is based on the criterion that, if all data points in a considered range lie within a treshold distance to a straight line connecting the first and last data point of that range, a segment is found. This approach is especially suited in the context of the two challenges, because the walls of PICO's environment are (sufficiently) straight. Moreover, the static objects of the Hospital Challenge are (sufficiently) rectangular. The iterative procedure encompasses the following steps and computations:

1. Start with the first and last data points, corresponding to θ = -2 rad and θ = 2 rad, respectively (assuming these have not been filtered out during pre-processing). Set i_start and i_end, respectively, equal to the corresponding indices (0 and 999).

2. Compute the perpendicular distances, d_i, of all other data points to a straight line from data point i_start to i_end [1]:

Here, (x₁,y₁) and (x₂,y₂) are the Cartesian coordinates of data points i_start and i_end, respectively.

3a. Compute the maximum of all distances computed at step 2 and the corresponding index. If this distance is below a certain treshold (which accounts for measurement errors), go to step 4, otherwise, go to step 3b.

3b. Split the segment, i.e. set i_end equal to the index computed at step 3a, and go back to step 2.

4. A new segment is found. Save the indices of the first and last data point belonging to the segment, i.e. i_start and i_end. Set i_start = i_end + 1 and i_end = 999 (again, assuming this data point is not filtered out during pre-processing), and return to step 2.

5. Repeat this procedure until all data points are considered, i.e. until i_start is no longer smaller than the index corresponding to the last data point.

After the segmentation procedure has terminated, segments consisting of a number of data points that is below a certain treshold are discarded. This adds robustness, because occasionally segments only consist of 2 data points, for example, and thereby may form the two edges of an opening. Moreover, a sufficient number of data points is required to obtain a reliable fit.

Line fitting

Next, a line y = ax+b is fitted onto each segment by means of the linear least-squares method. It can be shown that the solution is

where N_seg is the number of data points in the considered segment and the sums run over index i, going from the indeces corresponding to the first data point of the segment to the last [2]. For each segment, the coefficients a and b are stored. The resulting fits are shown in Figures 6-8 as blue lines.

A serious drawback of this approach is that it is not possible to represent vertical lines, because coefficient a goes to infinity. This means that no reliable fit is found for walls that are more or less parallel to the y-axis of PICO’s local coordinate frame. Nonetheless, it is a very simple approach that will show to suffice for exit detection purposes.

Corners and edges computations

For subsequent segments, the Euclidian distance between their neighbouring endpoints, i.e. the last data point of segment j and the first of segment k = j + 1, is computed. If this distance is below a small treshold, a corner is assumed to be found. To compute its coordinates, the intersection of the line fits of the two segments is computed. If the distance is not below the treshold, an edge is found which is a point at which either a jump in the LRF data is observed or at which there is a gap (a set of angles over which no distance within range is measured) in the LRF data. Within the context of the Escape Room challenge, the first occurs if, for instance, PICO ‘looks’ at the corridor at an angle; the latter occurs if, for instance, PICO ‘looks’ into the corridor. Edges, obviously, also occur at the first and last data point of the (pre-processed) LRF data.

For each segment, the coordinates of its first and last point are saved, whether it is a corner or an edge. The resulting corners and edges are shown in Figures 6-8 as red circles.

Target computation

A corridor (entrance) is possibly detected if edges occur between two subsequent segments (in order to exclude the edges at the very first and last data points). Two cases are distinguished for the situation where PICO can ‘see’ the corridor:

1. PICO scans both of the walls on either side of the corridor, i.e. PICO is located in the region directly in front of the corridor, and

2. PICO scans one of the walls of the corridor and the corner of the entrance on the other side of the corridor.

Determining which case is observed is based on the slopes (coefficient a) of the lines fitted through the subsequent segments. In case 1, the observed walls should be more or less parallel, so their slopes should be equal up to a certain treshold. In case 2, on the other hand, the walls should be more or less perpendicular, so a_j should equal -1 / a_k up to a certain treshold.

1. In case 1, the edge that is furthest away from PICO is used. A line is drawn through it, perpendicular to the line fit of the opposite corridor wall. The midpoint of this line serves as target.

2. In case 2, the edge closest to PICO is used. Similarly, a line is drawn through it, perpendicular to the line fit of the opposite corridor wall. Again, the midpoint of this line serves as target.

The resulting target is shown in Figures 6-8 as a yellow circle. The method described here serves the purpose well, because a target is first placed at the entrance of the corridor. Only after PICO is already in front of the corridor, the target is placed further into the corridor and, eventually, at the actual end of the corridor.

Visualization and Testing

In order to see how the developed algorithm operate, a visualization is made using the openCV library. With this library dot, line, arrow, circle and rectangle shapes are created to represent the laser range data, detected walls, velocity vectors, corners and PICO respectively. These shape objects are drawn on a window iteratively representing PICO and its interpretation of the surrounding, as can be seen in Figure 6.

Using this visualization, the program can be tested to optimize the behaviour of PICO. To explain main parts of the testing phase, three test cases are considered. However, a lot more cases have been tested in order to ensure robust behaviour of PICO while leaving the room.

Test 1: Large Room and Parallel Exit

As shown in Figure 6, PICO is positioned in a large wide room with the exit parallel to one of the walls. In this case, PICO is not able to see the whole room at once because some walls are too far away. In this case, detection of the exit can be a challenge and therefore PICO is programmed to initially start moving away from the walls untill the exit is detected. This allows to have a better view of the room since it is moving to the center. If the exit is detected, PICO can continue to move towards the exit. In the example in Figure 6, this happens quite rapidly. In case the exit would not be detectable, PICO sets a temporary target in front of him, to keep moving through the room. Detection of an exit which is parallel to one of the walls is an unique case which has been tested extensively. However, the detection algorithm had no problems to detect these special kind of exits.

Figure 6: Large Escape Room with an exit parallel to a wall.

Test 2: Small Exit

Another case, illustrated in Figure 7, can be challenging due to the narrow exit of around 0.5 meters. Here PICO’s positioning is made accurate enough to fit through without colliding. To gain more accuracy, PICO is driving slower which is caused by a larger amplitude of the rejective field in the narrow corridor, making the overall velocity vector smaller.

Figure 7: Escape Room with a small exit.

Test 3: Realistic Environment

As visible in Figure 8, the walls of the room consist of separated blocks. The detection of the exit is made robust to these kind of gaps, by using a minimal threshold for the size of the exit. As shown, PICO does not mistake these gaps for an exit.

Figure 8: Escape Room with realistic wall containing gaps.

Results

Figure 9 shows the final result of the Escape Room Challenge. During this challenge, PICO managed to escape the room within 15 seconds, as the fastest of all groups. In the beginning, it is visible that PICO starts with rotating counterclockwise. This happens because PICO did not see the exit immediately and therefore starts scanning its surrounding. When the exit is found, a target is placed, indicated by the yellow circle. Next, PICO starts to move towards the exit, represented by the green arrow. It can be seen that the target does not stay located at the exit, but rotates with PICO. This is because the target is updated at a lower frequency and therefore PICO remembers a fixed target relative to himself for a short period of time. When driving, PICO is pushed away from the walls by the rejective field, represented by the red arrow. The resulting velocity of PICO is represented by the orange arrow. When entering the exit, the target is relocated at the end of the corridor.

Figure 9: Final result Escape Room Challenge.

Hospital Challenge

In this section, the strategy for the Hospital Challenge is discussed, as well as the algorithms that are used. The discussion is structured based on the software components as shown in Figure 5: finite state machine, localization, mapping, path planning, motion control and detection.

Finite State Machine

Figure ...: Finite State Machine for the Hospital Challenge.

For the hospital challenge, a new Finite State Machine (FSM) is composed. In the FSM the requirement of going to different cabinets in an arbitrary sequence and the necessity of aligning Pico once it has arrived at the cabinet are implemented. The adjusted FSM used for the hospital challenge with labelled transitions is shown below.

First, the different states depicted in circles are briefly explained, after which the transitions labelled with Roman numerals will be explained.

States:

• IDLE: Pico has not yet been initialized, this is the starting state.
• INITIALIZING: During the initialization, Pico is turned on and starts to locate itself in the given environment using its localization functionality.
• TASK MANAGER: Now that Pico knows its current location in the map, it asks for the next goal (either a cabinet of no goal). This goal is extracted from a vector that is initially filled with the user input as provided through the terminal.
• PLANNING: Since the target location is known, Pico is able to plan a path using the constantly updated map and location.
• EXECUTING: With the path determined, this state is responsible for executing that path using Pico’s motion control functionality.
• POSITIONING: Now that Pico is in the neighbourhood of a cabinet, proper alignment is needed, for which the motion control functionality is again used.
• RECOVERING: A recovery state that is responsible for getting Pico out of situations where it might get stuck or almost bumped into an object. Last-minute resources such as resetting the map may be used here under specific conditions.
• FINISHED: This state is reached once all the cabinets provided by the user have been visited. The challenge is over once this state is reached.

Transitions:

• I : Pico is turned on and starts executing the challenge.
• II : The transition is made to the Task Manager once the initial location of Pico is found.
• III : If there are still cabinets to be visited, the next target is passed through to the Planning state.
• IV : A path towards the current goal is calculated, and can now be executed.
• V : During execution, Pico notices that the current path is not viable anymore, sending the state back towards Planning.
• VI : Pico got stuck or almost bumped into an object while executing, thus the state is switched from Executing to Recovering.
• VII : After successfully finishing the appropriate recovering procedure, a new path needs to be planned since the position of Pico may have changed.
• VIII : In the executing state, Pico detected that the current goal has been reached, and transitions towards the Positioning state, so that it can align itself properly (to take the snapshot).
• IX : Once the built-in alignment procedure is successfully finished, the current cabinet goal is finished and a new goal is requested at the Task Manager state.
• X : If the Task Manager notices that it has reached the end of the array containing all the goal, it can safely assume that the challenge has been completed.

The Finite State Machine as it is described above is a schematic representation what will eventually be implemented in the switch/case loop of the main file. It then uses the states as cases, and the transition requirements to switch between them.

Software architecture

The proposed information architecture is depicted in Figure 5. It shows a generic approach, so note that a specific challenge may require additional functionalities and interfaces. Between the software and mechanical components, information is shared via interfaces marked in green and labelled with an arbitrary number or letter. These interfaces dictate what information is set by which component and what information is shared, and among which components. In the central section, this schematic overview visualizes what capabilities are intended to be embedded in the software. Firstly, interface 10 represents the data received from the user, which may include a JSON file with a map and markers, depending on the challenge. On the right, interface 1 between PICO (including the provided software layer) and the designed software shows the incoming sensor data, i.e. structs with distance data from the Laser Range Finder (LRF) and odometry data based on the Omni-wheel encoders. This data is (possibly) processed and used to map PICO’s environment (mapping), to estimate PICO’s position and orientation (localization), and to detect static/dynamic obstacles (detection), via interfaces 2, 3 and 5. This knowledge is stored in the world model, serving as a central database. Via interface 4, a combination of the current map, PICO’s pose and the current (user-provided) destination are sent, to plan an adequate path. This path is sent over interface 8, in the form of reference data for the (x,y,θ)-coordinates. The motion control component will then ensure that PICO follows this path by sending velocity inputs over interface 9. Simultaneously, the detection monitors any static/dynamics obstacles on the current path online. If this is the case, interfaces 6 and 7 serve to feed this knowledge back to either the path planning component to adjust the path or directly to motion control to make a stop. On the left, interface A between the behaviour scheme and the capabilities shows that the high-level finite state machine manages what functionality is to be executed and when. Interfaces B represents the data that is chosen to be visualized to support the design process, i.e. the visualization serves as a form of feedback for the designer. The information that is visualized depends heavily on the design choices later on in the process and, therefore, this will not be explained further. Implementation

The components described above are intended to be explicitly embedded in the code through the use of classes. The functionality that belongs to a certain component will then be implemented as a method of that specific class. At this stage of the design process, the specific algorithms/methods that will be used for the functionalities are not set, but some possibilities will be mentioned here. Simultaneous mapping and localization (SLAM) algorithms, based on Kalman filters or particle filters, could be used for the mapping and localization components. Moreover, for path planning, Dijkstra’s algorithm, the A* algorithm or the rapidly-exploring random tree algorithm can be used. For motion control, standard PI(D) control, possible with feedforward, can be used to track the reference trajectory corresponding to the computed path. Additionally, for detection, artificial potential fields can be used to stay clear from obstacles.

Figure 5: Software architecture.

Localization

Clearly, autonomous behaviour of PICO in the context of the Hospital Challenge requires the implementation of a localization algorithm. Recall that, in the Escape Room Challenge, only the relative position of PICO with respect to the exit was required to autonomously drive out of the room. In the Hospital Challenge, however, (an estimate of) PICO's global pose is needed, i.e. its pose with respect to some global coordinate frame, because it needs to know where it is with respect to the provided map of the hospital environment, in order to autonomously visit the next cabinet in a sensible way.

Since a certain starting area is specified on the provided map, the localization problem can be classified as a tracking problem. A certain initialization procedure is, however, required to infer an estimate of the initial pose using the knowledge of the starting area. To solve the tracking problem, typically, extended Kalman filters (EKFs) or particle filters (i.e. Monte Carlo localization) are used. The key difference is that EKFs represent the belief of the robot's pose, or the state, by a single multivariate Gaussian, whereas particle filters represent a multimodal belief by finitely many samples, i.e. weighted particles. As a consequence, EKF algorithms are computationally significantly more efficient. This forms the main motivation to use an EKF algorithm for the localization software component. Moreover, the EKF is relatively simple and tuning is quite intuitive.

An odomotry-based motion model is used, because it is generally more accurate than velocity-based ones as it does not suffer from the mismatch between velocity references sent to the robot's base and the actual velocities (if drift and slippage are ignored for the sake of the argument). Other than that, odometry is directly available. Moreover, a feature-based measurement model is used. Such models are computionally cheap compared to beam-based models, because, by extracting features from the raw LRF data, the measurements are projected into a low-dimensional feature space. An additional benefit, as mentioned before, is that quite some software of the exit detection algorithm from the Escape Room Challenge can be reused for the feature extraction algorithm. Furthermore, a maximum likelihood estimator is used for the data association problem. With other words, for each observed feature, the landmark that corresponds best is used for updating the belief.

The feature extraction algorithm will be discussed first, followed by the EKF algorithm and its motion and measurement models, and, finally, the initialization procedure is covered.

Figure ...: Results of the feature extraction algorithm.

Feature extraction

As mentioned before, a significant part of the exit detection algorithm of the Escape Room Challenge could be used for the feature extraction algorithm. In this section the main changes and improvements will, therefore, be discussed that are done with respect to the exit detection algorithm, in order to transform it into a feature extraction algorithm.

Considering typical Hospital Challenge maps, such as the example map in Figure 2, and the fact that the implemented EKF algorithm accepts point landmarks, it is most straightforward to use corners as landmarks, i.e. room corners, door posts and cabinet corners. A distinction will be made between convex and concave corners. As signatures, the integers 1 and 2, for convex and concave, respectively, are used. The feature extraction algorithm will, thus, based on LRF data, compute a number of features currently visible. This will be in the form of a vector z_t containing the range, bearing and signature of each observed feature. The range ψⁱ

In Figure ..., the result of the feature extraction algorithm is shown. As mentioned, the feature extraction algorithm is able to distinguish between concave and convex corners. This difference is shown in the figure as well, where solid circles are used with different colors, cyan is used for concave corners and magneta for convex corners. Note that if a corner is not yet classified as either convex or concave, it is shown as an open red circle. The walls are shown in blue and PICO itself is represented by the red, rectangle.

Extended Kalman filter

As mentioned, an EKF algorithm is used for localization. The algorithm is given by

As inputs, the EKF algorithm requires the previous belief of PICO's pose given by the mean μ_t-1 and the covariance Σ_t-1 at time t-1 . Moreover, the odometry readings at times t-1 and t, x̅_t-1 and x̅_t, the observed features at time t, z_t, and the feature-based map m, containing the Cartesian coordinates and the signature of all landmarks, are needed. Note that, in the context of the Hospital Challenge, the feature-based map is obtained by adding signatures to the corners in the provided vector map. The EKF algorithm gives an estimate of PICO's pose at time t as output, again given by a mean and covariance μ_t and Σ_t, respectively.

In the EKF algorithm, lines 2-4 represent the motion update and lines 5-18 the measurement update as implemented in the motion and measurement model. Both will explained in more detail. Actual implementation of the EKF algorithm slightly deviates from the EKF algorithm presented above, but this will be explained later.

Motion model

In the motion model, a prediction of PICO's pose at time t is determined based on the available odometry data at times t-1 and t. PICO's movement is divided into three separate motions: a rotation δ_rot1, a translation δ_trans and another rotation δ_rot2. The three motions are determined using the odometry readings at times t-1 and t, and are calculated by

In line 2, the mean of the prediction of PICO's pose at time t is determined by adding a vector g_t to the mean of PICO's pose estimate of time t-1. This vector g_t contains the three, previously determined motions. Next, in line 3, the Jacobian G_t of vector g_t is determined, which is needed in line 4, where the covariance of the prediction of PICO's pose at time t is calculated. Note that a covariance matrix R_t is added, which models the uncertainty of PICO's movement. It is assumed that the uncertainty in PICO's movement is constant over time, thus R_t = R.

Measurement model

Next, the prediction of PICO's pose is corrected by means of the measurement model. First, in line 5, a covariance matrix Q_t, which models the uncertainty in the obtained LRF data, is introduced. Again, it is assumed that this uncertainty is constant over time, thus Q_t = Q. Next, in lines 6-12, a loop over all landmarks is given. In line 7, a vector δ_k is introduced in which the differences in x and y of a specific landmark and the prediction of PICO's pose are stored. In line 8, the transpose of this vector is multiplied by the vector and stored in q_k, which represents the squared distance between PICO and a particular landmark. All vectors corresponding to a pose of PICO (μ_t-1, μ_t, x̅_t-1 and x̅_t) are given in the form (x, y, θ)^T, while the vectors z, which correspond to features, are given in the form (r, φ, s)^T. Therefore, in line 9, the distance between the prediction of PICO's pose and a particular landmark is used to produce a vector in the same form of that of the features. Next, the Jacobian of this vector is determined in line 10. In line 11, The Jacobian is used in combination with the covariance of the prediction of PICO's pose in order to produce Ψ_k. Note that the covariance matrix Q of line 5 is added.

In line 13-16, a loop over all observed features at time t is shown. The purpose of this loop is to determine which landmarks correspond to the features that are observed. First, in line 13, the argument corresponding to the minimum of a cost function is determined. In this cost function, the difference between an observed feature and the vector of line 9 is used. The transpose of this difference is multiplied by the inverse of the result of line 11. Its result is again multiplied by the previously determined difference. The argument of the minimum is stored in a vector j and actually represents which landmark corresponds best to the observed feature. Next, the Kalman gain K_tⁱ is determined.

Finally, in lines 17 and 18, the estimate of PICO's pose, represented by mean μ_t, and covariance Σ_t are determined using the Kalman gain and the previous pose estimates.

Implementation

Figure ...: Only features observed in the room where PICO is currently positioned in are used for localization.

The implementation of the EKF algorithm roughly follows the algorithm as presented above. However, there are some differences which will be elaborated. First, it is chosen to store the covariance of the estimate of PICO's pose, Σ_t, as a private matrix in the header file of localization, rather than making it public and to use it as input of the algorithm when called upon. Even though its impact is minimal, it reduces computational complexity of the software. Next, for the same reason, in the loop of lines 6-12, not all landmarks are used, but only those of the room or part of the hallway that PICO is located in. This can be seen in Figure ..., where in the left window the features are shown that are used for localization and in the right all features that are observed. As seen, the feature extraction algorithm already recognizes two features in the room that PICO is about to enter, however, they are not used yet. The hospital environment is divided into nine different segments of which seven are rooms and two are a half of the hallway.

Figure ...: Situation where no features are observed.

Moreover, not all observed features are used when computing PICO's next pose estimate, but only those up to a certain threshold. Both these adaptions provide robustness since it reduces the chance that wrong data associations are made, which can have serious consequences. It might occur that none of the observed features fall within the threshold, or that no features are observed at all. The latter is shown in Figure ..., where PICO is driving through a hallway. Then the motion update as determined in lines 2-4 is used for the estimate of PICO's pose. Finally, since transpose and inverse matrices are widely used throughout the algorithm as well as many matrix products, separate functions have been created which are used from within the EKF algorithm. This way, the algorithm remains organized.

The essence of localization is shown in Figure ..., where clearly the effect of drift is observed. In this figure, two frames are shown. The left frame corresponds to the produced software where the EKF algorithm is implemented for localization. The right frame shows the actual simulation. In the left frame, two versions of PICO's pose are compared by means of a red and blue open circle. In red, PICO's pose as result of localization using the EKF algorithm is shown. In blue, PICO's pose is shown according to the odometry readings. As seen, when comparing PICO's pose corresponding to the odometry readings to PICO's actual pose in the simulation frame, it is clearly observed that at the end of the upward movement, PICO's pose corresponding to the odometry readings has drifted away significantly. On the contrary, PICO's pose as result of the EKF algorithm corresponds perfectly with PICO's actual pose in the simulation frame.

Figure ...: The effect of drift during movement. In red, PICO's pose as result of the EKF algorithm and in blue, PICO's pose corresponding to the odometry readings.

- Add that PICO's orientation stays within -pi and pi?

- Code snippet

Mapping

In order to plan a path with the A* algorithm, a grid-based mapping software component is needed and thus created to generate a map. With this map, obstacles can be detected to which the planned path can be adjusted. This map is created based on the occupancy probability of each grid. First, the provided hospital map is imported to the mapping algorithm, giving a high occupancy probability to the grid points corresponding to known walls and cabinets. Then the map is updated with the current measurement data, increasing the occupancy probability on the grid points which can be seen by Pico. The probability of the grid points between Pico and the measured data points is decreased since the measurement confirms that there is no object in that area. In this way, the map is updated each time new measurement data is received. By increasing and decreasing the occupancy probabilities, the mapping algorithm is able to correct for measurement errors.

Bresenham’s Line Algorithm

Figure ...: Bresenham's Line Algorithm.

To map an environment using a grid-based method, it is necessary to use matrices. These matrices for the occupancy grid-based method are filled with either a 0 or a 1. To eventually be able to determine which grid gets a 0 and which grid gets a 1, probabilities per grid need to be calculated. The first step in doing so is to know which grids need to be updated, based on the laser data Pico received. For that purpose, Bresenham’s line algorithm is used. This is an algorithm that selects which grids in the matrix together make a close approximation of a line. The line, in this case, is one of the laser beams emitted by Pico. By receiving Pico’s global position and transforming the endpoints of the laser beams to global coordinates (so with respect to the bottom left corner of the map), the algorithm is able to determine what grids of the global mapping matrix need to be updated. It can be the case that the same grid is updated twice in one routine, but this would make sense since especially close to Pico multiple lines would pass through the same grid. The actual updates will be discussed later on. A schematic overview of the problem is shown in Figure XXXXXXXXXXXXXXXXXXXX below, wherein the bottom left corner the global world frame is shown. The matrix grids are depicted as grey boxes (either coloured in or white). Also, Pico is shown on an arbitrary position, with its own frame and one laser beam emitted from it. The coloured in grids is how the Bresenham’s algorithm interprets the laser beam, where still a distinction is made between an obstructed grid (as marked in orange) and a free grid.

Since there are a lot of laser beams per update received by the sensor, and constant updating of the surroundings is desirable, the entire algorithm should be able to quickly execute. Otherwise, other software components would be delayed by the mapping updates, which would counteract its whole purpose. By using this specific algorithm, only updates are applied to grids that are relevant and lie within PICO’s detection range. Together with the local updating, these computations are generally very efficient from a computational standpoint.

Bayesian Logit Updating

Figure ...: Logit conversion of a value between 0 and 1 to negative and positive infinity [3].

When determining an occupancy probability for a grid point between 0 and 1, the values become very lose to this integers. When a grid point is certainly unoccupied the probability is decreased every time this is confirmed, resulting in very low numbers. The same goes for certainly occupied grid points, which results in numbers close to 1 with very high significance. Multiplication of such numbers on a computer can lead to significant rounding errors and is very inefficient. To solve this, the probabilities are converted to log odd probabilities using the logit function. This logit function maps the probabilities to numbers ranging from minus infinity to infinity instead of 0 and 1, as is shown in Figure XXXXXXXXXXXXXXX.

The current belief of the grid cell occupancy is determined by the Bayesian log odd update function:

Here the first term is the logit of the inverse measurement model which indicates the update based on the measurement. This update is added to the second term which is the previous probability at time t-1. The third term is the initial probability that a grid cell is occupied. In this case, this value is set to 50% probability, so to zero in the logit form, since the pre-known map is implemented as a high initial probability. In this way, a grid cell on the initially provided Hospital map is occupied with a very high probability instead of a certain probability to be able to correct for localization errors.

After each Bayesian update, the probability value is transferred to a value between 0 and 1. When this probability is higher than an adjustable threshold, the grid cell is displayed as occupied. Moreover, the weights of the increment and decrement of the probability updates are adjustable. These parameters are tuned in such a way that static objects are rapidly drawn on the map and errors in the measurements can be erased. Dynamic objects are drawn on the map but removed after a short period of time since the object is no longer occupying those grid cells. In this way, a “shadow-like form” is drawn following the dynamic object which is used in path planning to avoid the obstacle.

Added functionality

In some circumstances, it may be the case that the grids in the map have been updated in such a way that they don’t represent the real situation accurately anymore. This may be the case due to a moving object leaving a “trace” which can’t be corrected since PICO has no line of sight on these grids anymore. It may be a rare situation, but the mapping software component has some functionality built-in that can be used to reset the map to its initial state only showing the known walls and cabinets. From that point on, mapping continues to update the reset map according to what Pico sees. This functionality is carefully used so that the map is not reset unnecessarily, losing vital information such as the location of closed doors and objects.

Functionality is also added through different shades of the grids based on their probability. This mainly functions as feedback to see what Pico thinks. If grids are coloured using the relatively lighter shade of orange, it indicates that Pico hasn’t had enough information to almost certainly say that an object is at that position. The implementation of this can be seen in the simulations of the Hospital Challenge. Currently, Pico does however not base its decisions on the three different shades since they all lie above the tuned probability threshold that distinguishes free and occupied grids.

Figure ...: Example of the mapping of static objects.

Figure ...: Example of the possible grid sizes of the map, 0.3 m (l) 0.06 m (r)

Path planning

In the Escape Room challenge, a feature detection algorithm was used to find the exit of the Escape Room. This data was then used as input for the attractive field of the Potential field algorithm, resulting in Pico having a goal relative to Pico’s local coordinate frame (the exit corridor) to drive towards. This approach worked very well for the Escape Room Challenge, but since the Hospital Competition is much more complex a dedicated path planner is required to guide Pico through the map and towards the cabinets.

Considered optimal path planning algorithms

Several options for path planning algorithms have been considered for this cause. Dijkstra's Algorithm, Rapidly Exploring Random Tree (RRT), RRT* and graph and grid-based A* algorithms have been examined and evaluated for several important properties. Based on the fast computation time w.r.t. other grid-based path planning algorithms, and relative ease of implementing it was chosen to work with a grid-based A* algorithm. The main argument of choosing the A* algorithm is that a grid can easily be updated with obstacles dynamically, such that paths can be planned around detected obstacles. In comparison with for example weighted graph A* planning it is required to choose nodes which can not be altered dynamically easily. An overview and rating of the algorithms that were examined can be seen in Table X down below:

Table X: Considered path planning algorithms with scores for relevant properties.

A* Algorithm

The A* algorithm works as follows: In a global coordinate frame a path needs to be planned from a continues starting point in [m] to a continuous target in [m]. This global map is transformed into a grid as explained in the Section Mapping. In this grid of size N x M, a path has to be planned from a start point (i,j) index towards a goal point. From the start point, all adjacent grid points that are not obstacles are evaluated, For each adjacent grid node n the cost g(n) is calculated, which represents the Euclidean distance from the start node to node n, and the cost h(n), which represents the Euclidean distance from the target node to node n. The algorithm then goes to the node which has the lowest cost f(n) = g(n) + h(n) and evaluates all adjacent nodes in a similar fashion. All visited nodes are iteratively stored in a CLOSED list, such that nodes can only be visited once by the algorithm. Furthermore, all evaluated adjacent nodes are stored in the OPEN list, such that cost functions of adjacent nodes only have to be computed once. and then starts evaluating all adjacent nodes that have not been evaluated before. Prior to the iterative search of finding nodes with minimum cost functions until the target node is found, obstacles are placed on the CLOSED list, such that these can not be visited by the algorithm. Obstacles like walls have a very high value for g(n) and h(n), and are therefore automatically avoided by the lowest cost determination. In case no unevaluated adjacent nodes of the currently evaluated node are present, and if the available adjacent nodes are obstacles, the node with the minimum cost function f(n) from the open list is taken. When a dead-end is reached by the algorithm, it automatically goes back to the last grid point with the lowest combined cost that is not evaluated yet. This process is then repeated until a path of grid nodes is found from start to goal. Using this approach, it is of course also possible that no path can be found, for example when the starting point is enclosed by obstacles. In the latter case, the algorithm provides an exitflag which indicates that no path could be found.

Figure X: Path planned with the normal map (left) and with the weighted map (right).

Weighted Map

If the A* algorithm would be implemented like this, it is likely that a path would be planned directly next to walls and/or other obstacles, as it treats a minimal travelled distance as being optimal. In order to avoid paths to be planned close to corners, close to walls in a hallway or tightly past edges of door openings, a weighted map is made and added to the cost function, such that the evaluated cost function becomes f(n) = g(n) + h(n) + w(n). The weighted map is constructed on the last known grid map from Mapping, before the A* algorithm is called. It is constructed by evaluating each node (i,j) in the map. First, adjacent nodes are evaluated and checked whether they contain an obstacle. If they do not contain an obstacle, the evaluation radius of node (i,j) is increased such that all next adjacent nodes are evaluated. This is repeated until an obstacle in the evaluated circumference is present, or the evaluation radius exceeds a threshold, which represents the maximum distance from an obstacle from which the weighted map affects the planned path. If one or more obstacles in the circumference are detected, the Euclidean distance w.r.t. node (i,j) is computed. Then node (i,j) is assigned the minimum of these Euclidean distances multiplied with a weight factor W, such that node (i,j) in the weighted map contains a weight based on the Euclidean distance to the nearest obstacle w(n). Thus now when a node is evaluated by the A* algorithm and the cost function f(n) is calculated, the corresponding cost w(n) is extracted from the weighted map. Figure (X) on the right shows the difference between a path that is planned with and without the weighted map.

Figure X: Path planned with the weighted map (left) and with the blocked map (right).

Blocking Map

As the grid size of the map is parameterized, it can be chosen to have a smaller length than the maximum width of Pico. Therefore for the A* algorithm, it would be possible for Pico to plan paths through which it does not physically fit. An example of such a case is when a dynamic obstacle is standing in a door opening. It then partially blocks the door, but if the grid size is sufficiently small, grids in-between the dynamic obstacle and the edge of the door are interpreted as free space by the mapping algorithm. Therefore in this a path could be planned through this small opening through which Pico does not fit. The weighting algorithm takes care of this problem in regular cases, as this adds a sense of optimality of rather taking a detour than driving close through a wall, which is the case for such small openings. However, when this detour becomes very long, taking this detour is no longer optimal. Increasing the threshold of seeing lager detours still as being optimal w.r.t. planning through small gaps can be achieved by increasing the MAXIMUM WEIGHT of the weight map. Increasing this weight however negatively affects the planned paths in regular cases as the weighted map is constructed using the Euclidean distance of each node w.r.t. the closest wall. This would then thus result in the path planner planning through the minimum of the weighted map, which is not always desirable. Therefore, the solution to this problem is to also interpret nodes which are less or equal than 0.5 times the width of Pico away from obstacles, as being obstacles, and hence adding these nodes to the CLOSED list. Therefore, a path can never be planned through gaps or near walls through which Pico does not physically fit, or at which Pico cannot be physically present without having a collision. Figure (X) on the right shows how this approach leads to the desired path.

Reducing computational time using compression

Figure X: Fine (left) and coarse path (right) from a certain starting location to the target.

At this point, the computation time of the path is relatively long compared to the time it takes Pico to follow it. An easy way to increase the computational speed would be to just increase the grid size, but this has the large downside of losing detail. This detail is not required in a lot of cases, but in some cases, in tight spaces, this detail is required to be able to compute a detailed map around obstacles. Therefore it would be desirable to be able to switch between coarse path planning with low computational times, and fine/detailed path planning in cases where coarse path planning does not suffice. Therefore path planning with a variable grid size was implemented based on [4]. This way of planning allows for grid sizes of distant nodes to be larger and nodes closer to the current position to be smaller. This way a fine path is planned and the computational time is reduced. The downside however is that each time the end of the fine path is reached a new path must be computed. Therefore the total time it takes to compute a fine path is spread out over the distance being travelled. After implementation and tuning, this did not result in satisfactory behaviour. The essence of using a coarse grid and a fine grid for path planning, however, was maintained. mapping capabilities as this can lead to walls or other objects being portrayed bigger than they actually are. Several improvements have been tried out, where some were more successful than others. The most significant improvement is mentioned consecutively.

In order to be able to dynamically switch between coarse and fine path planning using a provided grid map from MAPPING, it is necessary to be able to compress the map. The compression function uses the map and a compression factor N as an input. When using a compression factor of 2, (2x2) grids are compressed into a single grid, hence reducing the dimension of the map, but also removing detail. The map is compressed by looping over blocks consisting of size NxN, where N is the compression factor. If there is an obstacle in any of the elements of block N x N the compressed element is assigned a 1 indicating an obstacle, and otherwise is assigned a 0. As the map spans a 2D space, the number of potentially evaluated nodes by the path planning algorithm reduces quadratically as a function of the compression factor N. The compressed map is then used as input for the path planning algorithm. After a path is computed the path is decompressed such that the path is defined in the mapping grid. Figure (X) on the right shows the uncompressed (left, fine) path and the decompressed (right, coarse) path for a given starting point and target. Of course compressing the map has downsides. For example if the compression factor is too high, to much detail is lost and door openings are no longer detectable in the map. It can thus happen that due to compression, no path can be planned from the starting point to a certain target. In this case the corresponding exitflag by the A* algorithm is activated, and the compression factor can be reduced.

Potential Improvements

a) Replanning detection One of the ways to detect if a path needs to be computed is if a previously unmapped obstacle is now in the way of the planned path. The way that this is detected is by simply checking if no obstacles are present on the nodes of the path in the grid map provided by MAPPING. Of course a coarse path is computed using compression and decompressing the computed optimal path, it is possible that no obstacles are present in the provided map on the nodes of the path, but an obstacle is actually in between the nodes of the planned path. For example a door could be initially assumed to be open, but as soon as Pico sees it, the obstacle is updated on the map. When this obstacle only consists of a single node and this node does not match a coarse path node, then the path being blocked is not detected. In order to enable this detection, the nodes in between the coarse path nodes must also be checked. Such an algorithm has not been implemented for this course, but is certainly a good improvement as then, similarly as is implemented for a fine path, Pico can replan the path as soon as it detects an obstacle being in the way of the path.

Motion control

The path planner now provides various options to compute an optimal path, due to the compression function. From this function a path in (X,Y) coordinates in meters is obtained. Simultaneously from the localization algorithm Pico’s (X,Y) position within the global coordinate frame is known. In order to follow the path, Pico’s (x,y) position in the global frame and a goal on the path w.r.t. this global frame are used to compute a relative goal w.r.t. Pico’s local coordinate frame. This relative goal is provided to the attractive field as also used during the room challenge. The resulting effect of this approach is a control loop which actuates Pico to a goal on the path with a simple gain. This gain can be increased by choosing a steeper attractive field towards the relative goal.

FigureX: Combination of attractive and repulsive field vector as function of minimum distance to an obstacle.

In order to enable the possibility that a coarse path can be followed continuously, without hitting details of objects in the world which are not taken into account in coarse path planning due to compression, a rejective field is added. The rejective field takes into account all the LRF data within a radius of Pico, which is set to be 1.5 [m]. Any laser-beam within this range contributes to a repulsive vector. Both the repulsive and attractive field vector are normalized, and combined into a single vector which is used to control the direction of motion. The orientation of Pico is similarly as during the room challenge, aligned with the attractive field vector, such that Pico is always facing its target. The normalized vectors of the attractive and repulsive field are combined using the corresponding weight factors F as indicated in Figure (X) representing the attractive field in blue and the repulsive field in orange. The factor for the repulsive field is dependent on the minimum distance of a visible object w.r.t. Pico Dmin. The effect of the repulsive field vector w.r.t. the attractive field vector is increased when Pico is closer to an obstacle. The dotted black line on the left is the threshold at which Pico executes an emergency stop.

Another tuneable parameter is the goal on the path which is provided. The distance of the target on the path w.r.t. Pico’s position can be tuned. For coarse path planning this distance is relatively large, as this provides more flexibility for the potential field algorithm. For example tight corners of the path can be cut off safely, due to the incorporation of the rejective field. This enables in a relatively coarse computed path, to still result in a smooth optimal trajectory of Pico’s motion. This distance of the target on the path can be interpreted as being a rope. The target on the path can be interpreted as being a rail, dragging Pico along the path using the rope. Increasing the length of this rope allows more flexibility in movement w.r.t. the computed path, but requires more effort by the rejective field algorithm to avoid obstacles. Decreasing the length of the rope enforces that the computed optimal path is followed more closely and thus reduces the effort of the rejective field. This way, by adjusting this length, it is possibly to dynamically make an adjustment between the potential field algorithm and the rejective field algorithm, where the potential field algorithm is fast, but less robust, and the A* path planning algorithm is robust, but is slower to compute.

Coarse path planning is always the initial option of path planning and actuation of motion, but when Pico has detected an object within a near collision radius, it is likely to be in a tight space, where the coarse path planning in combination with the long ‘rope’ is insufficient. In the latter case the compression is reduced such that a fine path is computed. Simultaneously the length of the ‘rope’ is reduced such that the computed path is followed more closely and the effort of the rejective field is reduced. This way it is possible to compute paths out of tight spaces where a potential field algorithm does not suffice. AN EXAMPLE OF PICI FOLLOWING A COARSE AND A FINE PATH CAN BE SEEN IN …. SIMULATION WITH FINAL PATH

Recovery state

For situations in which it is impossible for Pico to follow the fine path as well, another solution has to be come up with. The situations in which a fine path is calculated but cannot be followed is when static obstacles block the path, when a dynamic obstacle has occurred on the path and it is not moving until Pico moves away from it or when the goal is actually unreachable due to obstacles and/or closed doors. For the first two situations, a recovery state is introduced. The recovery state is triggered whenever Pico has had to make an emergency stop, meaning that an unexpected obstacle has appeared on the path and Pico cannot continue its current movement. In the recovery state, Pico´s direct surrounding is mapped more accurately than in the planning state, increasing the likelihood of the path planning algorithm to find a path that leads Pico away from this situation. In the Recovery state, the same approach of first looking for a coarse path and only then a fine path is used. For the situation that a dynamic obstacle blocks both Pico and the dynamic obstacle from moving, a counter is used such that the amount of path planning attempts remains limited. If a threshold value is reached, Pico will stop planning, and will instead follow its repulsive field gradient for 1.5s to move away from the dynamic obstacle, therefore resolving the situation.

Detection

In the original software architecture, a Detection component was taken into account. The function of this component mainly evolved around the detection of objects and walls, influencing the Motion Control and Path Planning components via the earlier described interfaces. However, while developing the Motion Control and Path Planning components of the software, the detection functionality as it was imagined beforehand was already incorporated within these components themselves. So Path Planning took the responsibility to detect and plan around static/dynamics obstacles on the path, while motion control detects whether or not the current goal position is reached. Therefore the Detection component eventually has been dropped in the final architecture.

Visualization

In the visualization called the world map, the provided map of the hospital is visualized with the walls, corners and cabinets. The occupancy-based grid map is drawn over the same window. Here objects with high occupancy probability such as the walls are darker then detected objects with lower occupancy probability. At the localized position and orientation, Pico is drawn. In the corners the detected convex and concave corners, used to localize the position of Pico, are indicated with two types of blue dots. On the map, the planned path that Pico is about to follow is drawn in green. When following this path, Pico uses an attractive and repulsive field which are visualized by arrows. Now the window visualizes Pico’s interpretation of the world around him which is very useful for tuning the algorithms in the program.

When Pico is aligned to a cabinet a new window is drawn with Pico in the center, showing the environment from Pico’s point of view. Here the raw sensor data is visualized with on top of that the lines and corners detected. At every reached cabinet this window is saved as a snapshot.

-------- ------ --- -- --- - SHOW EXAMPLE OF A SNAPSHOT -----

References

[1] https://en.wikipedia.org/wiki/Distance_from_a_point_to_a_line

[2] https://nl.mathworks.com/help/curvefit/least-squares-fitting.html

[3] Course: Motion Planning for Self Driving Cars at the University of Toronto https://www.coursera.org/lecture/motion-planning-self-driving-cars/lesson-2-populating-occupancy-grids-from-lidar-scan-data-part-1-p4Na5

[4] Variable Sized Grid Cells for Rapid Replanning in Dynamic Environments – Rachel Kirby, Reid Simmons, and Jodi Forlizzi – October 11-15-2009, St. Louis USA – IEEE/RSJ International Conference on Intelligent Robots and Systems.