Football Table Vision: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==Building the Vision GUI== | ==Building the Vision GUI== | ||
<p>In order to build the Vision GUI, you need to install qtcreator and the opencv libraries</p> | <p>In order to build the Vision GUI, you need to install qtcreator and the opencv libraries</p> | ||
<code>sudo apt-get install qtcreator <br /> | <blockquote><code>sudo apt-get install qtcreator <br /> | ||
sudo apt-get install libopencv-dev</code> | sudo apt-get install libopencv-dev</code></blockquote> | ||
<p>This tool runs on both x86 and x86_64 systems, however it is compiled against static libraries from Prosillica. These static libraries have to be specified in the ''Qtvision.pro'' file for x86_64: </p> | <p>This tool runs on both x86 and x86_64 systems, however it is compiled against static libraries from Prosillica. These static libraries have to be specified in the ''Qtvision.pro'' file for x86_64: </p> | ||
<blockquote> | <blockquote> | ||
Revision as of 10:50, 10 September 2013
Building the Vision GUI
In order to build the Vision GUI, you need to install qtcreator and the opencv libraries
sudo apt-get install qtcreator
sudo apt-get install libopencv-dev
This tool runs on both x86 and x86_64 systems, however it is compiled against static libraries from Prosillica. These static libraries have to be specified in the Qtvision.pro file for x86_64:
LIBS = -lopencv_core \
...
../src/pvapi/staticlib/x64/4.4/libPvAPI.a
And for x86
../src/pvapi/staticlib/x86/4.4/libPvAPI.a
The Vision GUI
To run the vision GUI, you need to have root privileges. After building the vision tool in Qt, the executable should reside in the /Qtvision/bin folder.