PRE2019 3 Group4 Script

Script

English

Feedback

Correct1: The answer is correct. Good job!

Correct2: This is the right answer. Nice work!

Correct_Short1: Correct!

Correct_Short2: Well done!

Incorrect1: Sorry, this is incorrect

Incorrect2: Sadly, this answer is wrong.

Incorrect1_repeatImmediately: Sorry this is incorrect. try again!

Incorrect2_repeatImmediately: Sadly, this answer is wrong. try again!

Incorrect1_repeatLater: Sorry this is incorrect. try again later!

Incorrect2_repeatLater: Sadly, this answer is wrong. try again later!

Modules

Part1: Welcome to the tutorial of Braillearn. In this short tutorial we will inform you about how to use our device. First of all make sure that the side of the device with the written text (which you can feel) is faced towards you. Succeeded? Okay, nice.

Part2: The device consists of a number of buttons. To find out what all of them do, we will walk you through them one by one. All buttons are located on the top side of the device.

• RST:

First of all we will look at the reset button. If you press this, your current task will be re-ran. This button is the leftmost button located on the top side. Could you press the ‘reset’ button for me?

--NXT: The following button is the ‘next’ button. With this button you tell the device that you have filled in an answer and would like to check it. This button is the rightmost button and is located on the top side. Could you press the ‘next’ button for me?

--LVLUP: Exactly in the middle of the top side, in between the two braille cells, the level indicators are located. With these buttons one can select different tasks. With the upper indicator you go to the next task and with the lower indicator you go to the previous tasks. Could you press the ‘up-indicator’ for me?

--LVLDOWN: Could you also press the ‘down-indicator’ for me?