RoPod/Tutorials/Commands cheat sheet
Jump to navigation
Jump to search
| Alias | Command | Purpose |
| buildit | cd $CATKIN_WORKSPACE; catkin_make |
Build all packages in your catkin workspace |
| clean_build | cd $CATKIN_WORKSPACE; rm -rf build/ devel/; cd $CATKIN_WORKSPACE/src/; rm CMakelists.txt; cd $CATKIN_WORKSPACE; catkin_make;" |
Remove previous build and rebuild catkin workspace. |
| pico-core | export ROS_MASTER_URI=http://192.168.44.81:11311 |
Tell that the ROS master is at Pico via the wireless connection. |
| pico-core-wired | export ROS_MASTER_URI=http://10.0.0.2:11311 |
Tell that the ROS master is at Pico via the wired connection. |
| pico-wired | export ROS_MASTER_URI=http://10.0.0.2:11311; export ROS_IP=10.0.0.2; export WIRED_CONNECTION=true |
Set the relevant ROS parameters to the wireless communication via the ropod-router |
| pico-wireless | export ROS_MASTER_URI=http://192.168.44.81:11311; export ROS_IP=192.168.44.81; export WIRED_CONNECTION=false; |
Set the relevant ROS parameters to the wireless communication via the ropod-router |
| pstart | roslaunch pico_bringup start.launch |
Start all the communication with the hardware on pico |
| sshpico | ssh ropod@192.168.44.81 |
ssh to Pico via the wireless network |
| sshpico-wired | ssh ropod@10.0.0.2 |
ssh to Pico via the wired network |
| teleop <<robotname>> | rosrun robot_common teleop.py <<robotname>> |
Use your keyboard to navigate with the robot |
In order to create some data which you can play back, you can create a ROS bag-file. You can take a look at the "Recording data"-paragraph this page of the EMC course.