RoPod/Tutorials/Matlab Installation

From Control Systems Technology Group
Revision as of 17:37, 22 March 2017 by 20170140 (talk | contribs) (Created page with '<div style="width: 40%; float: right;"><center>{{:RoPod_Table_Menu}}</center></div> <div STYLE="float: left; width:60%"> In order to install Matlab, run the following commands:…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

In order to install Matlab, run the following commands: 

sudo apt-get install cifs-utils
mkdir /mnt/matlab

Then follow this instructions: ftp://ftp.tue.nl/tue-ftp/pub/windows/campus/matlab/Linux/EN_MAN_Matlab_InstAct_Linux.pdf

Install (at least) the following toolboxes:

  • Robotic Systems Toolbox.
  • Embedded Coder.
  • Other desired toolboxes.

Later you can add more toolboxes if needed by following the same installation instructions.

In the next set of instructions, we are going to install the Matlab and RoPod interface.

Retrieved from "https://dsdwiki.wtb.tue.nl/index.php?title=RoPod/Tutorials/Matlab_Installation&oldid=35563"