PRE2015 3 Groep1
Group members
- Indy Hoeks - 0911750
- Aaron Steinbusch - 0903892
- Valery Visser - 0847109
- Goos Wetzer - 0902160
- Viktor van Wijk - 0905890
- René Zaal - 0810911
Introduction
In the Netherlands about 100 million every year is spend in the construction industry on vandalism and criminality. Companies are bankrupted by the thefts occurring on building sites. To prevent these thefts, nowadays building corporations install stationary cameras. Those cameras themselves are very expensive and their application is cost intensive. These cameras must be positioned multiple times, because of the changing building sites. Besides, there are mostly no walls or parts the cameras can be attached to. This results in very expensive camera units, which carry the cameras on poles, or solutions where stationary cameras must be repositioned multiple times. The solution given here is a drone, which covers the whole area, has significantly less blind spots, and delivers solutions for a better recognition of the intruders and retracing the stolen goods.
A drone assisting security. It will able to detect suspicious activities in corners or difficult spots. These spots would be blind spots for regular surveillance cameras. Thereby the prejudice of flying security drones is, like already stated in the previous paragraph, that they can cover large buildings, with less cameras. The drone can notice suspicious movements and if it does, the drone can warn security. Which can there-after check whether there is actually something wrong. This can be done by looking at the footage the drone sends. In the meantime, the drone will follow the person or object that triggered the alarm, and record what it sees to help recognize the perpetrator, if he/she escapes. If a perpetrator takes the drone down the alarm will go off automatically. If drones are used as surveillance cameras or guards, less actual security guards will have to be hired. Therefore, the costs for the security will go down. Another prejudice is the fact the drone can be used if stationairy cameras are not an option. For example on building sites where a lot of stuff is stolen or on open areas where it is simply impossible to mount a fixed camera.
The drone could also be used for secondary uses during the day: The company could use it to make pictures or videos. However, this will not be the aim of this project.
This page shows a new solution for building companies and security companies, with all properties of the system clearly and elaborately discussed and a recommendation for the changable aspects of the drone.
Scenario
To show the importance of our system, there are two scenarios made. The first scenario directly corresponds to the main application of our solution. The second scenario is another possible implementation of our system, which could be used in the future.
Tuesday 20th December of 2016
This year’s winter came late, very late. But now it's almost time for Christmas, the weather conditions finally act like winter came too. Last night the soil froze and small snowflakes started to fall. The building site will be totally abandoned for at least two weeks, because of the predicted snowfall and cold. All the gear will be left unattended. But not totally unattended.. The security drone was introduced to the building site a week ago. Programmed to keep an eye on all places where the valuable gear is located it circled around all night to catch the intruding persons which tried to steal the specialized gear. And now, the drone will work for two full weeks. His first night has been done already. The cold environment made it actually easier to detect the warmer bodies of the intruders, and the alarm had gone once in the last night. The intruder was scared and fled right away. But while circling around the building site in the morning dew, a moving thing was detected with the heat sensors. Following it at an appropriate distance, a signal was sent to the security guard located at the central station. Even though the guard responded within a minute, the drone had trouble following the intruder, because of a combination of snow and fog. After continuing the direction the intruder went the intruder came in sight again and the drone started to follow the intruder after the signal of the security guard. Considering the person hadn’t reached the valuable goods yet , the goal was to scare him away. So the drone starts to make loud noises, shine a bright light at the intruder and tries to take pictures of the intruder. This intruder seemed to be careless, because he continued to run towards the valuable goods. While he gathers the stuff, the drone circles around the intruder and tries to make as many photo’s as possible, with the face if possible too. The police is already warned the moment the security guard accepted the signal of the drone about the intruder and is now on its way. Following the intruder the drone sends its location constantly to the guard at the main station. Therefore when the police arrives, they can locate the intruder as fast as possible. But the person starts to leave the building and heads towards another direction as they came from. The drone keeps following at a close distance, and sends the police its locations. The sirens of the police are already hearable and the intruder starts to run faster and faster. But it’s already pointless. The good communication between the system and the security makes sure the police is as effective as possible and the intruder is caught at the entrance it would take to exit the site. The pictures are used as evidence, to proof that the person was stealing. Otherwise it could be used in face recognition or in search warrants. The success of this drone is again proven. On to the next 13 days of 24 hours watch!
Friday 14th February 2020
A couple of weeks back, the Rijksmuseum in Amsterdam was the first large institution that implemented drones to guard the building. The decision to invest in flying cameras was made because of the increasing number of burglaries in museums around the capital city. Besides this, the costs of security guards were becoming higher and higher, and a change was needed. The patrolling security guards have been fully replaced by the flying cameras. These drones can photograph and film the environment, and chase a possible suspect. If they encounter something unusual (moving objects or a change in the environment) they send out a signal to the control room. The cause and severity of this unusual situation is then evaluated by a security guard in the control room.
On that particular evening, it is raining like it hasn’t rained in months. The newly installed drones are monitoring the hallways and exposition rooms as usual. After a couple of hours patrolling, one of the drones detects a small object that hasn’t been detected in previous rounds. The head of security is notified and looks at the footage sent from the robot. The object moved very fast and disappeared through a hole in the wall. Unless the Russians are experimenting with spying rodents, it is most likely an innocent rat. If the security guard wasn’t present for the determination of the threat, the drone would have activated the alarm for a rat, which is of course not desired behavior. After a couple more rounds, one of the drones detects a slightly opened door. It notifies the guard in the control room he has to start looking at the footage, while it moves closer to the door. Again, something small appears, but this time it stops moving in the middle of the hallway. Before the guard can determine what the object is, the screen turns black and the drone stops sending out its active-signal. It is at this point the guard knows the drone has been shut down, if not completely destroyed. He immediately sends another drone to the location and sees smoke and human-sized objects moving around it. The alarm is immediately sounded and the police is notified. Because of the smoke, it seems like the intruders haven’t noticed the second drone yet. This is why the guard commands the drone to follow them silently and stay at a distance. At one point, they are busy taking down some of the paintings and the drone finds a good moment to try and take pictures of the intruders’ faces. One of them quickly turns away his head, while the other one didn’t react as fast as his companion. Together with the face recognition system of the Dutch government, a name is quickly linked to this face. The drone then gets hit with an object and bumps into a wall. Because it is well protected against this violence, it is able to correct itself and gain some distance from the intruders. At this point, they know they have been spotted and decide to quickly leave the building. The drone follows them at a safe distance to the emergency exit, but has already locked it. They then smash a window and climb out of it. Normally, the drone will not follow suspects outside the building where it’s installed, but since the police has almost arrived, the guard commands the robot to follow them. As soon as they split up, the drone recognizes the clothes of the intruder it hasn’t photographed properly. It decides to follow him, since the other one is known already. Due to the GPS tracker in the drone, the police is able to follow him.
Focus
Assumptions
The problem which is focused on is theft on building sites, when those are supposed to be abandoned. This means at night time or in weekends / vacations. These building suites are surrounded by fences, but still intruders try to break in quite often. The value of the goods located at those building sites are surprisingly high, especially the specialized tools. This is highly disadvantageous for the building companies. Therefore they try to protect their goods with the stationary cameras named before. But their reach and coverage is not enough to stop all intruders. Still there are valuable goods stolen because of mazes in the security of the building sites. Another problem is vandalism like graffiti on those building sites. Cleaning of this graffiti is expensive, especially when the constructions are new. The problem which must be solved is to cover the continuously changing building sites, to prevent theft or vandalism by intruders. Some assumptions have been made about the situations and the intruders.
- The intruders have breached the normal fences surrounding the building site, and will therefore always enter through these breaches in the fences.
- Except for intruders, no other persons or animals are able to enter the bulding site.
- The weather in the simulation is ignored. Therefore, the drone will not be influenced by wind for example.
Requirements
The requirements are divided in functional and non-functional requirements, and analyzed using the MoSCoW method: Must have requirements, Should have requirements, Could have requirements and Want to have requirements.
Functional
Must have
The drone must be able to fly, especially outdoors, in a changing environment. The building site changes a lot, so the drone must be suited for loads of different situations. The drone must also be able to fly its way through this building site. The drone must also be able to land safely on its own. De drone must be able to navigate through this building site to the hot spots indicated beforehand. By its navigation it must be able to find its docking station at the end of its shift or in case the battery is low. It must reach its docking station before the battery is completely empty. The drone must be able to communicate abnormalities to the guard and react at the guards decisions. Thereby the drone must never take actions it’s not allowed to without explicit permission of the guards or reject the guards decisions. Another communication aspect is the fact the drone must always confirm its location (coordinates e.g. by GPS) to the guards, and signal the guard if there occurs a defect in the drone. Defects can be a take down by for example an intruder, but also a broken propellor or suddenly empty battery. The drone must be able to detect intruders by an infrared camera and/or its movement sensor. The drone must be able to detect at least 99% of all intruders. After an intruder is detected and the guard has confirmed the intruder, the drone must be able to follow the intruder and take photos of the intruder. These photos must be send to the guard and saved somewhere there. The drone must film its restricted area .
Should have
The routes it takes should be random. This way, the drone is not predictable and therefore better applicable. Thereby it should even land safely if one of the propellers or motors shuts down. The drone should have nearly continuous streams of data feeds, to adjust its navigation in an optimal manner. Missing data or slowly arriving data could negatively influence navigation and the reaction of the drone. It should not be possible to hack the drone. The weight of the drone should be as less as possible to reduce the impact of accidentally occurring collisions by reducing the kinetic energy. But the drone must be able to withstand mediate/moderately strong weather forces , where some robustness and therefore weight is needed. The optimal balance between those two must be found. The drone should be as silent as possible, because otherwise possible intruders will hear the drone. The done should be undetectable by its sound for distances of 10 meter or more. The drone should be easy to use for the guard. Giving validation for actions must not take long and understanding the signal the drone sends must also be easy in order to react as fast as possible.
Could have
The more complicated a drone will be the more (technological) problems are given the possibility to intervene. Therefore the more complex the drone and its actions, the greater the decrease of its reliability. This is why it could be useful to keep a drone as simple as possible.
Want to have
The drone could be less visible, but it’s visibility possibly discourages intruders. Therefore this is not very important.
Not functional
Must have
The drone is meant to surveille a specific area, and therefore must never leave the intended area. This area is surrounded by fences, which are recognition points for the drone. It must never collide with objects or persons. It must also never intentionally harm or interfere directly with someone in the building. This would be prevented by signals received from sensors on the drone. The drone must in all cases be able to react to unexpected situations in a safe, harm avoiding way. It must never harm persons in unexpected situations. The lightning and simple transmission signals must not interfere with the navigation or communication of the drone. It is especially significant when the drone can’t be controlled or influenced in its decision making by external signals.
Should have The drone should not film outside its restricted area. It should also not harm the privacy laws in a country. Therefore it must be clear that if you enter the restricted area, there is video recording present. This should be done with signs around the area that warn you that it is forbidden to enter the area as well as that there are drones with cameras in this area. In case the drone is following a suspect, it must not follow it outside the restricted area, because this would be filming in public domain and this is illegal. The drone should also be cost reducing for security companies and therefore for corporations. Otherwise the solution is not improving the situation and therefore not very beneficial.
Want to have
In case more drones are used together, they need to communicate with each other to cover the place and to prevent them of being at the same spot. This would be useless. One solution would be one main system, which decides what spot should be next to navigate to. This way it is still random, and the drones don’t interfere.
Scenario definition: The scenario that the drone will be tested in is a construction site. The scale of these sites can vary between 300 m^2 en 2000 m^2 The shape of the sites can differ. All construction sites are outdoors. The climate is that of a Temperate Maritime Climate. (as in the Netherlands) The site is surrounded by a fence. Valuable materials are spread out all over the site There are a lot of obstacles and height differences.
Assumptions Simulation The effect of the weather on the drone will be ignored. The simulation takes place at night and day. The light intensity will not change. The area is rectangular. The object that can be stolen are illustrated as point objects(treasure chests). It will take some time to grab the objects. The speed of the intruder will be lowered while carrying load. The obstacles block both the fly-zone and the walk-zone for the intruder. Apart for obstacles there will be no height differences. The intruder will have a flashlight. If the intruder is spotted the system works.
Stakeholders
Stakeholders have an interest in the development of a certain technology, but that does not necessarily mean that they can influence the development of the technology. These are some of the most important stakeholders regarding security drones: The first group of stakeholders are people that live close by an area that is being controlled by drones. These people might be inconvenienced by the noise the drone might make. On the other side, these people might feel more secure because these drones are patrolling an area close by. So, for these people, security drones will probably have both pros and cons. Security guards as we know them now are also important stakeholders because the security drone will partly replace regular security guards. These security guards would become unemployed because of this technology. So for security guards, introducing this technology will have unpleasant consequences. Another stakeholder would be an insurance company. Less break ins and especially less unsolved break-ins will lead to a more optimal situation for the insurance companies. Furthermore any footage of the drones can clear situations which involve fraud by employees or anything. These will all be caught on tape when the drone is working. This shows that introducing security drones will be very beneficial for insurance companies.
Users and their needs
Primary
There are a lot of users profiting from this system. This system will, like we already mentioned, be used as addition to the security of a site. The primary user of this system will be the security manager, which is located in a control room and responding to all alarms or messages the drones will send. This control room could either be in the building itself, like musea or military buildings which need extreme surveillance, and where it is essentially to react within seconds on site. Or this control room could be in a strategic place, and be able to manage multiple buildings or sites at the same time. Either way, the security is the primary user of this system, because he interacts directly with it, and is the person responding to it. Those primary users will think the system is useful because it gives warnings at detected movements or displacements. The system will detect more small changes than a person could, and therefore help the security manager to make less mistakes, or overlooked clues.
The security guards need the drone to be easy to use. The drone must be able to give a clear view of the area where movement is detected in order make sure that the security guard with overview can make proper decisions. The guard also needs to be trained in how to work with these machines so they know the skills and limitations. For the specific implementation of the drones, lots of tests needs to be done such as how many drones can be monitored by one guard, and what are the tools the drones can use to stop the burglar without doing harm.
Secondary
The secondary users are the security companies. Because their security managers make less mistakes, they function better and will provide better surveillance. Furthermore the system will be less expensive. Therefore, less manpower is needed this way and there will be less installation costs, because you don’t have to install and implement more complicated systems like hidden camera’s. Another secondary user is the company or owner which hires the services of a security company using those drones. They will profit greatly by better surveillance, because of the previous named reasons. Even if the burglars succeed to break in, the drone will try to take pictures of the suspects, and to lock them in. By these pictures the persons will be tracked down sooner and this will be an amiable aspect of the drone for everyone.
The most obvious benefit for the companies is the decrease in security costs: Once the system is up and running they will need significantly less employees. The second benefit is the quality improvement of the security. Chances that burglars are detected are higher and because of that the amount of stolen goods will decrease. The last and very important benefit is the improving of the safety of the employees. They will not come in contact with the burglars anymore and that is a very important for the image of that company. More musea and contractors will hire drone security companies as a result of that.
Tertiary
A tertiary user will be the society. By helping to induce thefts and insurance costs. Other tertiary users will be the insurance companies. Less break ins and especially less unsolved break-ins will lead to a more optimal situation for the insurance companies. Furthermore any footage of the drones can clear situations which involve fraud by employees or anything. These will all be caught on tape when the drone is working. The last tertiary user will be the police and or the state. Those will profit especially from the pictures the drone takes from burglars. Those will be very helpful for the police in catching the guys and completing the investigation. The society will have an emerged scene of safety when they are in a private controlled area. Finally, if the companies have reduced costs for the security of their wares, they can decrease the selling price or increase the quality of their product. Once again this will be favorable for the society.
Technical Aspects
State of the art - types of drones
Needless to say, the different types of UAVs can be implemented using different technologies. A drone is a type of Unmanned Aerial Vehicle (UAV). As the name implies, it is a vehicle that can operate in the air, without any person operating it in the vehicle itself. There are two types of UAVs: Remotely Piloted Vehicles (RPVs): these are UAVs that are remotely controlled by its operator from a distance. Because of this, the person who controls the airplane makes the decision how the vehicle behaves. On the other hand, we have a drone. It is an unmanned vehicle that operates almost completely autonomous; The drone gets a target from a controller, and then performs the actions completely autonomously.
Micro- and mini-UAVs
These UAVs are the smallest type of them all. They can only fly up to a maximum of 300 metres and are about the size of an average adult hand. Because they are so small, they can maneuver in smaller and more complex areas than all the other types of UAVs. These are especially designed for urban environments and housings.
Tactical UAVs
These fly up to a height of between 3 kilometres and 8 kilometres and can communicate and be operated over a distance of 3000 kilometres and can function for a maximum period of 40 hours. These type of UAVs are used by military force, and can even be equipped with missiles.
Strategic UAV
These can fly up to a maximum of 20 kilometers, have a flight period of about 30 hours. These type of drones are also used by military force.
Floaters
The main piece of technology consists of the equipped camera and the rest is just a balloon with some propellers to keep or place it in position. Except for the camera, this type of drone has not advanced much in the past decades. Due to the balloon based concept, these drones are stable, inexpensive, inaudible, energy efficient, durable, can cover huge tracts of land, but must be tethered and sometimes be reeled in when stronger winds occur.
Planes
These are the most used type of drones in governmental and military parties. For example, the MQ-9 Reaper keeps the borders of the UK in check. As far as half a century ago, the military used drones of this kind for reconnaissance. Nowadays the kinds of drones we are looking for when it comes to surveying large areas, are of the plane persuasion. These planes fly at several kilometers high and have special cameras onboard for making sharp, detailed images from a large distance. They are suited for patrolling large areas (they are even deployed for forests and national borders) and can chase targets through open areas. They will however quickly lose a target inside a building since they are not able to turn quickly enough to navigate inside buildings.
Quadcopters and octocopters
There is but a small difference between the two, octocopters are a bit more stable and are more redundant, most octocopters can land safely when one of the propellers breaks. These types of drones have ruled the consumer market lately and are rapidly becoming more affordable. These drones are often incapable of flying very high or fast, but are exceptionally suited for usage inside buildings. Because they are airborne, they can easily navigate stairs and blockages that would stem most other robots in their navigation. Their ability to change direction quickly and make precise movements is helpful in quickly and safely navigating the corridors of a building. These type of drones are obviously the best choice for indoor surveillance.
State of the art - sound
A drone for our use must be as silent as possible, otherwise you can hear it approaching. While the technology for drones is rapidly evolving, physics demands certain limits in their use. One of the things that determines the efficiency of a patrolling drone is the sound it produces. After all, if a perpetrator does not hear the drone, the chance that he/she gets caught increases drastically. While the possibilities for indoor drones are limited in type and size, for outdoor applications such as industrial sites and estates the possibilities are unbounded. The general rule is: the bigger the propellers, the lower the tonal distribution. Often the sound pressure produced is similar if not the same, but at lower tones in the sound spectrum, the noise quickly becomes inaudible at a reasonable distance. For inside applications the most quiet applications are balloon based, but those solutions are not quick enough for keeping track of a perpetrator. This means that the largest possible quadro- or octocopter becomes the design for indoors. Since there are no size constraints for outdoors, the easiest solution available is having a large durable drone patrolling high in the sky.
State of the art - Equipment
Some equipment for the drone is required in order to detect intruders. The first equipment that comes to mind when detection motion is required is using motion sensors. These sensors are however not suitable for security drones because they cannot function properly when they are moving. One way to use these detectors is to only scan the environment when the drone is hovering. But this would significantly limit the capital gain of security drones compared to the standard security systems as they are now. An alternative is using thermal cameras. Humans and animals will light up on the recordings of a thermal camera due to their body heat. There is software available that can recoginze and analyze this heat, which allows the security guard to receive a warning when a certain heat level is detected. An example of such software is FLIR Tools.
The security drones should also be able to make recordings which allow for identification of persons. This means it has to be a camera with sufficient quality. Themeral cameras alone do not seem to be very usefull for identification. This means a second camera is required for identification. But there is also a third option: A two in one camera. This is a camera that has both a thermal camera and a regular camera. A camera that would be very useful for this applicatoin is the Mini Dual-Sensor Camera Module for UAV/UGV Integration. This dual camera has a FLIR TAU 2 320x240 pixel or 640x480 pixel thermal camera and a SONY 10X Optical Zoom 530TV Line Color Camera (w/12X Digital Zoom) regular camera and it is designed for drones. The thermal camera also works with the FLIR Tools software mentioned above.
The Mini Dual-Sensor Camera has all the functions that our security drones need and it allows for detecting people while moving, while regular motion sensors do not have this ability. This is why this camera has been chosen to be used on the security drones.
Technical aspects to develop
Furthermore a drone is needed, which has the capability of switching its batteries and has a distance sensor for its navigation. Furthermore the drone needs GPS to know its location. The battery of a drone only lasts for a maximum of 45 minutes. Therefore it is useful to use a drone which can switch batteries. A system like explained in appendix A must be designed to establish this. This also means the drone must be either custom made or has the possibility of being adapted. Therefore the costs of the drone are quite high in the cost analysis. By combining these aspects and the same software the simulation uses, the drone can be finished.
Decision making
The drone informs the security guard when it noticies a potential intruder. After that, the security guard should be able to send the drone information on what it should do, but the drone should also be able to act autonomously up to a certain level. From the moment the drone detects something, these actions should be considerd.
Moment of detection
First of all, what could and should the drone do once it detects something? Even before the guard has decided whether this is a false alarm, or a legit alarm, the drone can be programmed to follow whatever it detected. This way, the guard can have a better look at what the drone detected and make a faster decision about the detection. It is important that the drone keeps a safe distance to the suspcect while following because of the safety of the suspect. The guard could inform the drone to get closer to the suspect at some point if necessary.
Assuming the alarms is legit, the drone has the following option in different situations:
one intruder: The drone will autonomously follow the suspect and make pictures when it does, in order to identify the suspect. It does not need any futher information from the security guard to know that it has to do this. This is quite an easy example with only 1 suspect.
Multiple intruders: What are the options when theres multiple intruders? Ofcourse, a single drone can only follow one person at a time. So if multiple intruders decide to split up, it has to choose. It could choose to follow the first person that is detected, or the nearest person. These are examples of autonomous decisions, but the drone could also receive orders from the security manager, if he thinks it is better to follow another person.
Securing important locations: A whole different approach would be to not follow one of the persons, but to fly to some important location, for example a location where valuable goods is stored. One should consider that this strategy could help the intruder find valuable goods if they do not know where to look at first. a drone could also choose to keep an eye on the main or nearest exit.
combining strategies with multiple drones:
Using multiple drones would allow you to combine these strategies. And these strategies could all be pre-programmed into the drones, which means it would not require interaction between the security guard and the drones. But the security guard should still be able to ovverrule these stragegies when he things this is necessary.
Losing sight of suspect: Things would become more complicated if an intruder manages to somehow escape from the field of view of the drone. In that case the drone would not know what to do and it would need information from the security guard. The security guard knows how the environment looks and could predict what the intruder could do in a certain situation. So if an intruder chooses to hide under or in something, the security guard can inform the drone what to do, for example, if an intruder decides to hide in a trash can, the security guard will most likely tell the drone to just wait, because there is nowhere the intruder can go. The security guard could also choose to remotely control the drone himself because it would be to compicated for the drone to find the intruder again on its own.
Interaction Drone-suspect
The drone will probably have little to no real interaction with the suspect.It could be possible for the drone to let the suspect know that he is being detected and that the police is on its way, but you cannot expect the drone to “arrest” the suspect, or to order the suspect to stop trying to escape. In our society, people simply would not let themselvses be arrested by a machine or robot, because it is not a human. Moreover, since the drone does not have access to any type of violence or threatments, it is very difficult to force an intruder to leave the stolen things and kindly wait for the police to arrive.
Detailed decision making
How does the drone decide who to follow in case of muliple intruders?
- Nearest person
- First detected person
- Random
It is very hard do instantly determine who you should follow in case of a break in, even for a human guard it is very hard to predict which of multiple intruders he should follow for a maximum result, which is minimazing damage/stolen goods and catch the intruders. This is why there are so little options here.
The drone could choose to fly and guard a specific area rather than following a suspect.
Areas available to guard:
- Exits
- locations with valuable goods
- Important connecting paths (some central point or hallway in an area).
What should be taken into account when deciding what a drone should do and what are the options?
- In case of multiple drones, if drone 1 detects an intruder, drone 2 has not detected this intruder, so it does not know where this intruder is, which means the drone cannot follow that intruder. So the drone should do something else, for example guard a specific area.
- If the above happens, which area does drone 2 choose? It could autonomously always choose the closest point. (for this method there should be a list of locations for the drone to choose from).
- Choosing to secure valuable goods might not be the best strategy if the intruders already have taken some goods. At the moment of detection, the security guard decides whether he triggers a silent alarm (already stuff stolen) or a loud alarm (nothing yet stolen). The drone can use this information to predict where the intruders will go. If there is a silent alarm, intruders will probably search for more goods which can be stolen, so the drone should head to locations with valuable goods. But if there is a loud alarm going of, the intruders will probably try to escape so it is better to go to an exit in this case.
- It could also be the case, that the nearest point for drone 2 (which has not detected anyone) is on the other side of the secured territory compared to where the intruder is detected. In this case, it might not be very usefull to secure that nearest point. The drone could use the location of drone 1 (which is following the intruder) to have a rough location of the intruder. With this information, the drone could also choose to head to a point that is close to the intruder. (a bit tricky, what if this would take too long? → distance limit? )
- It could be an option to pre-program routes for drone 2 which it should fly when an intruder is detected. This way, the intruder could be intercepted. The route that it chooses to fly should depend on the location of the intruder (which is based on the location of drone 1), the kind of alarm that is going off (which can help predict where the intruder will go) and the area drone 2 is at.
(The more drones you use, the easier it will get for drones to make a decision, because you do not have to choose between actions, each drone could do a different action Autonomous decisions can always be overruled by a command given by a human)
Flowcharts decision making
Ethical and Political aspects
Ethical aspects
If a drone happens to be in a situation that has multiple, it should always choose the best outcome. This outcome should not be based on the performance of the drone (keeping the area as protected as possible) but also the most ethical one. Otherwise the drone could just lethally harm an intruder in order to protect the area, which is unethical. Therefore a form of ethics should also be implemented in the drone if it wants to be deployed in real life situations. If the drone does not contain this ethical system, then it can harm people and it becomes difficult to pin the one who is held responsible for the autonomic drone. So in order to implement this ethical system, we first need to look at the different kinds of ethical systems and how they apply to the drone. For this project, we only look at two major forms of ethics: utilitarianism, and Kantianism Utilitarianism is a form of ethics which can be summarized as the overall best outcome for the biggest group. If a drone gets into an ethical situation, it has to make a decision which makes the biggest group the happiest as possible.
However, a scenario of utilitarianism could be that the drone still lethally harms one intruder for the sake of an entire company, since the company will be the biggest and happiest group of people and only one person has to suffer. Kantianism thinks differently over this. Immanuel Kant (the inventor of Kantianism) formulated that a human being should never be treated as a means to an end. So as described above, beating the intruder for the sake of others is not an option according to Kantianism, since you use the intruder as a means to an end. According to Kant, the most important factor in determining what’s ethical is the concept of ‘motive’; that once actions is performed out of a ‘sense of duty’. For the drone, a duty could be that he should chase away the intruder on the construction site, if it tries to steal items. Of course, it still holds into account that he should harm the intruder to accomplish this as explained above. So the drone should chase the intruder away in a non-lethal manner, so no things such as Tasers, or pepper-spray since they can cause harm. One approach could be by scaring the intruder, this the drone could do by turning on lights or making noises, so that the intruder becomes aware of it and tries to flee. But there could be scenarios where the drone actually breaks an ethical rule. There is always a probability that this can occur, since a robot cannot perfectly be prepared for every possible scenario imaginable. So if a robot breaks an ethical rule, who should be held responsible for it? It could be held towards the engineers, because they are the once who designed and programmed the drone in the first place, so they are the one who also implemented the ethical system inside the drone. It could also be the company of the drone, since they are the one who green-lighted the concept, design and implementations of the robot. If they have given the robot a bottle of pepper spray to scare the intruder away, but ends up severely injuring the intruder for example, then they are the ones responsible for the injuries. A possible solution for this is that everyone should come to an overall agreement with the ethical behaviour the drone should and should not do. Companies as well as engineers as well as society should come to such agreement, so that the decisions made by the drone are overall the best possible decisions when looking at an overall aspect. It also depends on the unethical response of the drone, if it’s an programming error, than the engineers could be held responsible, if it’s a design error, the company could be held responsible and if it is an error made by the guard or intruder, than the these should be held responsible. Of course a drone could learn from his ethical mistakes so that in the future, these mistakes are not made again. This form of implementation can be considered as artificial intelligence: an agent is capable of learning from its mistakes and its environment. If a mistake has been made, an agent could learn and adapt from his mistakes and also an engineer could give feedback towards the agent so that the agent learns from these mistakes and will perform better in the future. These learned actions for specific scenarios could also then be implemented in other agents to avoid the same mistakes again. Overall, if a drone happens to land in a scenario where he has to make an ethical decision, this decision has to be based on the best possible outcome for the biggest group possible without (lethally) harming anyone. And if the robot makes an unethical decision, the robot should learn from his mistake through the means of artificial intelligence and the once who should be held responsible should be based on the scenario, whether it’s an programming error by the engineers, a design error by the company or a personal error by
Political aspects
UAVs can be equipped with many kinds of technologies, such as cameras, sensors, microphones and other communicating devices. And because these vehicles have these abilities, there needs to be rules made about what is appropriate and what not when using a certain type of drone. One of these themes for the rules is privacy. For example: in what type of situations can these drones be deployed in and what not? Depending on the drones capabilities, which ways are appropriate or not appropriate to act on autonomously for the drone and its situation, it should also be clear who should be held responsible for the drones actions, if the drones acts in an inappropriate way.
Another example is from the Electronic Privacy Information Centre (EPIC). This party has called for federal agencies to regulate and control the proliferation of these machines that are used for purposes of surveillance; especially in the area of hacking drones and other UAVs. To protect drones from being hacked, EPIC came up with certain ideas such as to circumvent encryption codes within drone surveillance software and the ability to manipulate hardware to gain access to drone surveillance data.
All these types of rules and approaches should be made before any type of droid is officially released to the public. There should not only be certain rules that should hold for all different types of droids in general (like a droid should not do harm to anybody), but also specific rules for robots that have certain properties. Like for example: when a drone has a camera installed on it, it should not be able to publicly expose the footage it takes, because that would violate the aspect of someone’s privacy.
Needed expertises
As can be seen some expertise is needed to establish the drone To start there needs to be an expert in drone navigation to navigate the drone. It is expected that the drone can use a lot of the same software as the simulation uses. But still the drone needs to be assembled, and it has to be made ready to fly. Therefore we need a drone specialist or drone mechanic. The third expertise we need is a security guard to react at the drones signals. The rest of the drone is already created in the simulation.
Cost expectations
For this cost analysis a relatively simple model is used. The model consists of a square building site with some high unoverseeable objects. The model has a fence around the building site, to protect in the first case from intruders. The costs of the system depends of course on the duration of the system. For this analysis we use a time period of 1 month. The fee of a security guard is estimated around 16 euros (night duty) and the fee for an installation engineer around 12 euros per hour. (both systematically hired, no self-employed guards)
Current market situation 1
For a building of 50 by 90 meters which uses 6 cameras to oversee the area around the building, the costs, including installation, is about €11.000,- euros. The cameras are €750,- each. So a total of €4500,- is spent on the cameras themselves. The cables for the cameras are very expensive, and building this network is time and cost expensive. This system is after installation integrated around the building and will stay there permanently.
What Costs Night vision cameras €4.500,- installation €6.500,- Total €11000,-
Current market situation 2
An example of cameras installed in a medium sized building site 8 Cameras/Outside Motion Detectors/Loud Tannoy/Unlimited Out Of Hrs Monitoring £180 p/w This system has only 4 cameras and those are only night time cameras. Thus in weekends, the building site is still not fully protected. There is no security guard reviewing this system and the cameras are quite simple and have a small range. This way the building site is minimally secured. Therefore it is assumed, these simple systems are not a real competitor for our system.
What Costs Night vision cameras €920,- Contract with alarm receiving station €32,92 Total €952,92
Current market situation 3
In the current situation, there are at least 5 stationary cameras needed. Night cameras which can see for at least 20 meters are around 750 euro. So only the cameras would be 750 euros. The prejudice of these pricey cameras is they can see at day too. Those cameras are moved a lot and will be handled often. Therefore the prediction is that they will last for only a year. In one month 312,50 will be spend on these cameras. The installation costs are quite expensive too. Installation of a single camera is estimated on 30 minutes. Connecting the total in the main system would take at least an hour too. Furthermore, these cameras cannot fly. And a construction site does not have many objects to attach the cameras to. So another 30 minutes is required to make a construction of poles or something to attach the camera to. This would lead to a 6 hour installation procedure. The construction site changes continually. The corner cameras will be stationed all day long in the same spot. But the middle camera, needs to be moved about every week, to obtain optimal situations. Therefore every week 1 hour installation should be required for a secure situation Every night a security guard is needed to control the cameras. A security guard works from about 10 o’clock in the evening to 5 in the morning. The construction builders start early so this is why the security guard is dismissed this early. But it is still a night of 7 hours with a fee of 30 euro per hour. So this will cost 210 per night. 6300 per month.
What Costs Night vision cameras €312,50 6 hour installation €72,- Security guard whole month €3360,- 1 hour installation every week €48,- Total €3542,50
Drone situation
The drone situation uses an infrared camera. These thermal cameras are quite costly. The estimation is about €2500,-. This would of course not be the cost reduction. But it replaces all 5 night vision cameras in the current building site. It has a normal camera too, with flash, so if an intruder must be captured, it will be able to do so. These cameras are made for outdoors and will only be handled by the drone. Because of their careful handling the expectation will be that they can last for at least 2 years of employment. Therefore they will cost 104,16 euros a month. A battery replacing system is included in the drone, because a drones battery only lasts for about 45 minutes. Such batteries take about 1,5 hour to get fully loaded again, so the drone requires 3 batteries and the battery changing system. The total of the changing/charging system and batteries costs about 430 (3 times 105 for the battery and 40 for the docking system (…)75 for the system which plugs the batteries in and out, which has to be made). The batteries will last for about a year so 535,83 euros must be paid every month. The installation costs would be way cheaper. The docking station must be placed somewhere in the construction site and the main points to navigate to must be installed. This would only take 1 hour and no intermediate reinstallation in the whole period. Furthermore the security guard can overview 4 or 5 construction building sites in the same time. This would reduce the security costs to 1/5 of its original costs The drone is an extra cost in this model. But the drone lasts longer than one month and can be reused. If the price of the drone is estimated on about 4000 euros, and the drone is estimated to last for 3 years. In one month about 110 euro must be reserved for the drone’s costs.
What Costs Thermal camera €104,16 6 hour installation €12,- Security guard whole month €672,- Drone €110,- batteries €35,83 Total €933,99
Besides the material and fee costs, less intruders will be able to escape the security. Therefore there will also be a cost reduction in these things. This analysis presents a way cheaper and definitely more valuable detection versus the current situation.
Test Results
TOBEDONE
Considerations
Some concerns have to be made when implementing this system.
First of all the visibility of the drone. There are multiple pros and cons in making the drone easy detectable for everyone. First of all by making the drone visible, it may have an dissuasive effect. If it is thought the place is well protected, intruders or vandalists will be less inclined in entering the place. Especially those who commit minor violations like graffiti will watch out for those kinds of places. Especially because the drone with camera will be accompanied by clear informative signs on the fences which inform passer-by’s there is camera observation and security drones.
But in contrary the clearly visible drone will be easier to spot and therefore a person may be able to hide in time. Especially when the drone is also clearly audible, they can hide before being in their visual field. By that the drone is also easier to take down, because localization is easier. But if the drone is taken down, there will be automatically send to the guard. So in this situation the intruder will still be caught hopefully.
Another consideration is the interaction with the intruder. The drone can follow the suspect as silent as possible, so they will take their time to get everything and this buys the police some time to arrive. But the other possibility is to turn on a loud noise or lights, which scares off the intruder. The best possibility will be the combination. If the intruder is already with the valuable goods, the drone should stay silent for the police to arrive. But if the intruder hasn’t reached the valuable goods, and the loud sound goes off, this will probably scare off the intruder. Which hopefully leaves without taking anything. This won’t get the intruder caught, but it will prevent from theft.
Recommendations
TOBEDONE
Planning
Week 1: (brainstorm)
- Introduction to the course
- Come up with ideas for the project
- Choose the best idea
- Make a first presentation
Week 2: (final idea)
- Literature research
- Process feedback
- Make a final idea presentation
Week 3: (research)
- Make a proper planning
- Research the considerations
- Safety (Valery)
- Privacy (Aaron)
- Decision making (Indy)
- Violence (Valery)
- Applicability indoors (Viktor)
- Derive requirements for the design
- Start with building the simulation engine (René)
Week 4: (start designing)
- Continue with the simulation engine (René)
- Environment design (Goos and Viktor)
- Improve requirements (Indy and Valery)
- Financial analyses (Valery)
- Research on motion detection (Aaron)
Week 5: (finish design)
- Continue with the simulation engine (René and Goos)
- Finish evironment design (Indy and Viktor)
- Start with the business case: File:Business.pdf (Valery)
- Interaction/decisionmaking (Aaron)
- New sketch
Week 6: (testing)
- Finish simulation engine (René and Goos)
- Start implementing decision-making: File:Flowchartdrone.pdf (Valery and Aaron)
- Create intruders (Indy and Viktor)
- Business case V2: File:Businessv2.pdf
Week 7 (improving)
- Improve the design
- Document the process
Week 8: (documentation and finishing the wikipage)
- Make multiplayer options (Renee)
- complete wikipage with all work done(Valery)
- Write conclusions on research done (Valery)
- Write about all work done in unity (Indy and Viktor)
- Write ethics (Goos)
Week 9: (finishing the wikipage)
- Put own written parts in wikipage(ALL)
- Simulating (Renee)
- Spellingcheck (ALL)
Week 10: (Presentation)
- Make presentation