Embedded Motion Control 2012
Guide towards the assignment
'Mission to Mars'
Introduction
Goal
Hardware
Installation
Installing Ubuntu 10.04 LTS
Ubuntu can be installed according 2 methods
- Using an USB stick.
- Using the hard drive.
For both methods the most recent installation instructions can be found on http://www.ubuntu.com/desktop/get-ubuntu/download. Make sure that you download the appropriate architecture ie. 32 or 64-bit. Creating a dual-boot system, ie. installing Ubuntu on the hard drive is the most convenient. When installing Ubuntu on an USB stick make sure to use some persistence/extra space during the install such that information is still there after a reboot.
If you installed Ubuntu on an USB stick you have to make sure that your notebook will boot from the USB stick. This can be edited in the BIOS or for most notebooks during the booting process, F9 can be pressed to select the USB drive.
Group Blogs
Year 2011
Group 01 - Visit Blog - Bart, Maarten, Stijn, Swan
Group 02 - Visit Blog - Serhat, Sergiy, Sultan, George, Robin
Group 03 - Visit Blog - Ron, Peter, Albert, Jan
Group 04 - Visit Blog - Dennis, Jos, Micha, Matthijs, John
Group 05 - Visit Blog Arjo, Jordan, Ferry, Lazlo
Group 06 - Visit Blog - Bernadette, Arne, Geert-Jan, Erik, Freek
Group 07 - Visit Blog - Rob, Rene, Rico, Pave, Nick
Group 08 - Visit Blog - Juan Camilo, Muhammad, Faran Ahmed, Handian, Haixu
Group 09 - Visit Blog - Edward, Marcel, Rene, Mirjam, Jacqueline