Designing the Opening Component

Click to go to Sliding Doors.

There are many aspects that need to be considered when developing the mechanical system.

Planning

Completion	Due Date *a little flexible	Stage
	30-Sept	Research existing mechanisms - Doors, Sliders, Sensors, Barcode Scanners etc.
	28-Sept	Create List of Requirements this component should fulfill
	1-Oct	Make a design selection for components
	6-Oct	Detailed Sketch(es) of Component
	6-Oct	Describe how it works/each sub-components use
	9-Oct	Build mini model?

Mini Brainstorm

Stuff to Consider	Open/Close Mechanisms	Drone Landings
Weather	270-360 Door Pushed open by the lift inside or opens & closes via motor rotation; could possibly hit drone?	Beacon signal 1 When drone is in range; each pressure sends signal to designated leg for landing?
Does Drone Land or Not?	Sliding Door Opens when drone lands on platform, slides to the side out of the way of the drone	Symbols Four different symbols on pressure plates to allow orientation of drone & landing locations for the legs?
	Flap to Inside The door falls away inside the chimney rather than flips out	1 Symbol/Signal Symbol or Signal produced directly from center or one of the sides of the chimney, drone can the calculate the offset & landing location on platform

Idea Elaborations & Selection

Highlighted in green are the components that will be used when further designing the Sliding Doors component

Concept/Idea	Elaborations	Pros	Cons

Research Questions

Scanning

Omni-Directional Scanner -
Fixed Position Scanner -
Require external power sources, otherwise batteries that need replacement often
Wiki-BarCode Scanners
[UPC Codes]
[Barcodes]
Barcode Scanner(s)

• MPSi system- omnidirectional or Single scanner (CRT, speed, direction, etc)

• • What type of scanners are there?
    • How they scan
    • How fast they scan
    • Cost?
  • Where to place scanning mechanism?
  • How much time is required for scanning?

Orientation

• • What kind of sensors / methods are there to orient objects a certain direction?
  • How does the drone drop package the exact same way each time?

Transponders

• • How are transponder signals sent and received?
  • Can they be coded to unique situation if so how?
  • How does the lock/unlock function via transponder key in a car work?

Opening Mechanism

• • How will drone open the door?
  • How will the door stay open?
  • How will the door keep rain out/from settling on top?
  • How does the door mechanism work?
    • 1 vs 2 doors, pop up or slide aside,
    • Will it hit the drone?
  • What kind of mechanical sliding doors are there
  • Can it hold the weight of a drone?
  • Where does the power come from to run the system?

Fixing/Maintenance

• • How robust is the system?
  • How does it send an error signal?
  • How can a person fix the mechanisms?

Environmental Concerns/Requirements

• • What are the minimum and maximum heat withstanding of the subcomponents?
  • Are the components water proof?

Requirements

Functional	Product	Process	External

Design Selection

Opening/Closing

• hinge,slide etc.
• signal receiver, contact points etc.

Scanning

• omni vs orietned

Orientation

• symbol,...