Embedded Motion Control 2014 Group 6

Wout Laarakkers 0828580

Rik Boonen 0805544

Dhruv Khandelwal 0868893

Suraj Prakash 0870060

Hans Reijnders 0806260

Updates

• Include Bool action_done and Bool wall_close in topic drive for handshake (23 May)

Planning

Week 1 (2014-04-25 - 2014-05-02)

• Installing Ubuntu 12.04
• Installing ROS
• Following tutorials on C++ and ROS.
• Setup SVN

Week 2 (2014-05-03 - 2014-05-09)

• Finishing tutorials
• Interpret laser sensor
• Positioning of PICO
• having ore first meeting

Week 3 (2014-05-12 - 2014-05-16)

• Programming corridor competition
• Corridor competition

Week 4 (2014-05-19 - 2014-05-23)

• Creating basic structure for programming in Ros
• Planning
• Dividing tasks

     * Drive node: Dhruv Khandelwal
     * Decision node: Hans Reijnders, Rik Boonen
     * Arrow node: Wout Laarakkers

• Programming individual parts

Week 5 (2014-05-26 - 2014-05-30)

• Programming individual parts
• Testing parts
• Integrating parts

Week 6 (2014-06-02 - 2014-06-06)

• Programming individual parts
• Testing parts
• Integrating parts
• Deadline for the nodes

Changes in group

Unfortunately Suraj Prakash has decided to quit the course, because he doesn't has enough time.

Corridor competition Software design

Software design

Structure

The first draft of the structure of nodes and topics is shown below.

The integer 'situation' and 'action' have certain values corresponding to different cases. These cases are defined as shown below.

Situation
1	Detected corridor
2	Detected dead-end
3	Detected corner right
4	Detected corner left
5	Detected T-crossing (right-left)
6	Detected T-crossing (right-straight)
7	Detected T-crossing (left-straight)
8	Detected crossing
9	Unidentified situation

.

action
1	Stop
2	Straight
3	Right
4	Left
5	Turn around
6	Follow left wall
7	Follow right wall

Taking corners

Decision node

The decision node is designed to act like a navigation tool. It tells the drive node where to go. The decision node does this by detecting which situation we are approaching (like corner left/right or T-crossing), taking into acount the information of the arrow node and previous turns and then tells the drive node where to go.

Situation determination

In order to determine which situation we are approaching, we want to know 3 things: is there a corner to the left, is there a corner to the right and can we go straight ahead?

We determine these 3 things by using the laser data. Unfortunately we will not always detect the corners and dead end at the same time, so when we detect one of these 3 we will drive to a fixed distance from the situation. In this time we drive we will determine if we also find the other two charateristics of the situation. Using the information we have we can determine the situation and publish it on the topic.

Action determination

When we have published a situation, then the drive node makes sure we drive to the center of the situation. If we are in the center, we will determine if there are deadends in any turns, look if there are any arrows and then make a decision which way to go.