PRE2019 4 Group2

From Control Systems Technology Group
Jump to navigation Jump to search

link titleLeighton van Gellecom, Hilde van Esch, Timon Heuwekemeijer, Karla Gloudemans, Tom van Leeuwen


Problem statement

Current farming methods such as monocropping are outdated and have negative effects on soil quality, greenhouse gas emissions, the presence of invasive species and the increase in crop diseases and pests (Plourde et al., 2013). Herbicides are often used to control pests or weeds, because the use of herbicides could mean better crop yield. Moreover, the use of herbicides can be much cheaper than hiring manual weeding labor, even by 50% (Haggblade et al., 2017). This is problematic because the increasing use of agricultural chemicals poses environmental and human health risks (Pingali, 2001). Some seek the answer to such problems in the rise of precision farming. Precision farming’s promises are to reduce waste thereby cutting private and environmental costs (Finger et al., 2019). Others look further into the future and consider agroforestry. In the book Agroforestry Implications (Koh, 2010) the following definition is used: “agroforestry is loosely defined as production systems or practices that integrate trees with agricultural crops or livestock”. The author of the book poses that agroforestry compromises on expanding production while maintaining the potential for forest protection, the need for biodiversity and alleviating poverty.

Agroforestry is labor intensive, therefore the need arises for automation taking over some tasks. A particular task is that of weed identification and removal. The definition of weeds might differ between people. Some definitions include that of Ferreira et al. (2017) who define weeds as “undesirable plants that grow in agricultural crops, competing for elements such as sunlight and water, causing losses to crop yields. ” or a definition by their features (Tang et al., 2016): fast growth rate, greater growth increment and competition for resources such as water, fertilizer and space. The main conclusion that could be drawn from these definitions is that weeds harm the agricultural crops, thus they need to be removed.

Such a weeding robot, or even a general purpose machine, would need many different modules. Each module should operate independently to complete its task, but it should also communicate with other modules. This research restricts itself by specifically looking at weed detection in a setting of agroforestry where between different (fruit) trees plants grow. The aim is to identify weeds by means of computer vision.

Users

User profile

Farmers that adopt a sustainable farming method differ significantly from conventional farmers on personal characteristics. Sustainable farmers tend to have a higher level of education, be younger, have more off-farm income, and adopt more new farming practices (Ekanem & co., 1999). The sustainable farming has other goals than conventional farming as it focuses on aspects like biodiversity and soil quality in addition to the usual high productivity and high profit. The individual differences suggest that sustainable farmers are more likely to originally not be farmers. Also, having more off-farm income indicates limited time devotion to the farm. The willingness to adopt new farming practices could benefit our new software, as it might be more likely to be accepted and tried out.

There is a growing trend of sustainable farming, with the support of the EU, which has set goals for sustainable farming and promotes these guidelines (Ministerie van Landbouw, Natuur en Voedselkwaliteit, 2019). This trend expresses itself in the transition from conventional to sustainable methods within farms, and new initiatives, such as Herenboeren.

Agroforestry imposes more difficulty in the removal of weeds, due to the mixed crops. Weeding is a physically heavy and dreadful job. These reasons cause growing need for weeding systems from farmers who made a transition to agroforestry. This is also ascribed by Marius Monen, co-founder of CSSF and initiator in the field of agroforestry.

Spraying pesticides preventively reduces food quality and poses the problem of environmental pollution (Tang, J., Chen, X., Miao, R., & Wang, D.,2016). The users of the software for weed detection would not only be the sustainable farmers, but also indirectly the consumers of farming products, as it poses an influence on their food and environment.

This research is in cooperation with CSSF. In line with their advice, we will focus on the type of agroforestry farming where both crops and trees grow, in strips on the land. To test the functionality of our design, we will be working in cooperation with farmer Jon van Heesakkers, who has shifted from livestock farming towards this form of agroforestry recently. Therefore, his case will be our role model to design the system.

System requirements

Since the approach and views of sustainable farmers may differ, one of the requirements of the system is that it is flexible in its views what may be concerned as weeds, and what as useful plants (Perrins, Williamson, Fitter, 1992). It should thus be able to distinguish multiple plants instead of merely classifying weeds/non-weeds. Based on user feedback, the following list of plant types should be recognised as weeds: Atriplex, Shepherd's purse , Redshank, Chickweed, Red Dead-Nettle, Goosefoot, Creeping Thistle and Bitter Dock. Furthermore, regarding the set-up of agroforestry, the system should be able to deal with different kinds of plants in a small region, thus it should be able to recognise multiple plants in one image. It also means that the plant types include trees, making which set the maximum height and breadth of the plants. The non-weedsare expected to be recognised when (nearly) fully grown, as young plants are very hard to distinguish. However, weeds should be removed as soon as possible and in every growth stage. Next, the accuracy of the system should be as close as possible to 100%, however realistically an accuracy of at least 95% should be achieved. The system should not not recognize a non-weed as a weed, because this will lead to harm or destruction of the value of that plant. Lastly, based on constraints on both the training/testing and possible implementation, the neural network should be as efficient and compact as possible, so that it can classify plant images real-time. The following will give a rough estimation of the upper bound for the processing time. Given a speed of 3.6 km/h and a processed image every meter and maximally two cameras are used for detection, than the upper bound of the processing time is 500 milliseconds per image. If the system performs the classification more quickly, than the frequency of taking pictures could be increased, the movement speed could be increased or the combination of these improvements could happen. Moreover, farming equipment is getting increasingly expensive and therefore they are a pray to theft. The design should minimize the attractiveness of stealing the system. This yields the following concrete list of system requirements:

  1. The system should be flexible in its views what may be concerned as weeds.
  3. The system should be able to distinguish the following types of weeds: Atriplex, Shepherd's purse , Redshank, Chickweed, Red Dead-Nettle, Goosefoot, Creeping Thistle and Bitter Dock
  5. The system should be able to recognize multiple plants in one image.
  7. Non-weeds should be recognized in a mature growing stage, whereas weeds should be recognized in all different growing stages.
  9. The classification accuracy of weeds versus non-weeds is preferably above 95%.
  11. The system should ideally be able to have no false positive classifications.
  13. The system should be able to work under varying lightning conditions, but under the restriction of daytime.
  15. Preferably the system should work well under varying weather conditions, such as heat and rain.
  17. The processing time of a single image should be real-time, that is in under 500 milliseconds.
  19. The position of the weed should be known in the image.
  21. The robot should be as less as possible the target of theft.
  23. The farmer should not have to worry about the system, data acquisition and validation should only take little of the farmer’s time.

    24. Approach and Milestones

      The main challenge is the ability to distinguish undesired (weeds) and desired (crops) plants. Previous attempts (Su et al., 2020)(Raja et al., 2020) have utilised chemicals to mark plants as a measurable classification method, and other attempts only try to distinguish a single type of crop. In sustainable farming based on biodiversity, a large variety of crops are grown at the same time, meaning that it is extremely important for automatic weed detection software to be able to recognise many different crops as well. To achieve this, the first main objective is collecting data, and determines which plants can be recognised. The data should be colour images of many species of plants, of an as high as possible quality, meaning that it should be of high resolution, in focus and with good lighting. Species that do not have enough images will be removed. Next, using the gathered data, the next main objective will be training and testing Convolutional Neural Networks (CNN)s with varying architectures. The architectures can range from very simple networks with one hidden layer to using pre-existing networks, such as ResNet (He et al., 2015) trained on datasets such as ImageNet (Russakovsky et al., 2015). Then, weeds will be defined as a species of plant that is not desired, or not recognised. Based on this, the final objective will be testing the best neural network(s) using new images from a farm, to see its accuracy in a real environment.

      To summarize:

      1. Images of plants will be collected for training.
      2. CNNs will be trained to recognise plants and weeds.
      3. The best CNN(s) will be tested in real situations.

      Deliverables

      The main deliverable will be a Convolutional Neural Network that is trained to distinguish desired plants and undesired plants on a diverse farm, that is as accurate as possible, and can recognise as many different species as possible. The performance of this CNN, as well as the explored architectures and encountered problems will be described in this wiki, which is the second part of the deliverables.


      Planning

      End of week 1:

      Milestone Responsible Done
      Form a group Everyone Yes
      Choose a subject Everyone Yes
      Make a plan Everyone Yes

      End of week 2:

      Milestone Responsible Done
      Improve user section Hilde Yes
      Specify requirements Tom
      Make an informed choice for the network structure Leighton
      Read up on (Python) neural networks Everyone

      End of week 3:

      Milestone Responsible Done
      Set up a collaborative development environment Timon Yes
      Have a training data set Karla

      End of week 4:

      Milestone Responsible Done
      Implement basic neural network structure
      Justify all design choices on the wiki

      End of week 5:

      Milestone Responsible Done
      Implement a working neural network

      End of week 6:

      Milestone Responsible Done
      Explain our process of tweaking the hyperparameters

      End of week 7:

      Milestone Responsible Done
      Finish tweaking the hyperparameters and collect results

      End of week 8:

      Milestone Responsible Done
      Create the final presentation Everyone
      Hand in peer review Everyone

      Week 9:

      Milestone Responsible Done
      Do the final presentation Everyone

      State of the art

      This section contains the results of many researches done on the subject of the project. Following are the main conclusions drawn from the literature research. In most existing cases, the camera observes the plants from above. This will be difficult when there are also trees. Three-dimensional images could be a solution. Secondly, lighting has a big influence on the functioning of the weed recognition software. This has to be taken into account when working on the project. A solution could be turning the images into binary black- and white pictures. Also, there are already many neural networks that can make the distinction between weeds and crops. It is also used in practice. However, all of the applications are used in monoculture agriculture. The challenge of agroforestry is the combination of multiple crops. Another conclusion is that the resolution of the camera has to be high enough. This has a large impact on the accuracy of the system. In most cases an RGB camera is used, since a hyperspectral camera is very expensive. RGB images are also sufficient enough to work with. A conclusion can be drawn about datasets. Most researches mention the problem of obtaining a sufficient dataset to use for training the neural network. This slows down the process of improving weed recognition software. At last, recognition can be based on color, shape, texture, feature extraction or 3D image. There are many options to choose from for this project.

      A weed is a plant that is unwanted at the place where it grows. This is a rather broad definition, though, and therefore Perrins et al. (1992) looked into what plants are regarded as weeds among 56 scientists. Again, it was discovered that views greatly differed among the scientists. Therefore it is not possible to clearly classify plants into weeds or non-weeds, since it depends on the views of a person, and the context of the plant.

      Hemming et al. (2013) and Hemming et al. (2018) have written research reports about a working system using weed detection. The first research works with three crops: onions, carrots and spinach. The research shows that recognition based on color requires less computational force than recognition based on shape. It is however in certain cases necessary to use shape recognition. It is important that the signal of the crop predominates compared to the weeds. For proper detection of an object, a minimum image resolution of 3 times the size of the object is required (based on Shannon's sampling theorem). The second research works with color recognition. HSI color dimension is used to convert the color observed by the camera into usable input for the software. The robot has a user interface so the user can help the neural network to learn the color of the plant. The user can determine the range of colors in which the plant’s colors are. This way the software becomes broadly applicable. Two interactive color segmentations are evaluated: the GrabCut algorithm and the FloodFill algorithm. The two algorithms fail due to the effect of shadows and multiple colors on a plant. The research shows that the settings of saturation and intensity are very important. To realize a working system, hardware is introduced and software is added to determine the relative positioning of the plant. In both researches, the camera observed from above the plant.

      Potato blackleg is a bacterial disease that can occur in potato plants that causes decay of the plant, and may spread to neighbouring plants if the diseased plant is not taken away. So far, only systems have been devised that were able to detect the disease after harvesting the plants. Afonso et al. (2019) created a system that had a 95% precision rate in detection of healthy and diseased potato plants. This system consisted of a deep learning algorithm, which used a neural network trained by a dataset of 532 labelled images. There is a downside to the system, however, since it was devised, and trained, to detect plants that were separate and do not overlap. In most scenarios, this is not the case. Further developments need to be made to be able to use the system in all scenarios. In addition, it proved to be difficult to gain enough labelled images of the plants.

      Most weed recognition and detection systems designed up to now are specifically designed for a sole purpose or context. Plants are generally considered weeds when they either compete with the crops or are harmful to livestock. Weeds are traditionally mostly battled using pesticides, but this diminishes the quality of the crops. The Broad-leaved dock weed plant is one of the most common grassland weeds, and Kounalakis et al. (2018) aim to create a general weed recognition system for this weed. The system designed relied on images and feature extraction, instead of the classical choice for neural networks. It had a 89% accuracy.

      Salman et al. (2017) researched a method to classify plants based on 15 features of their leaves. This yielded a 85% accuracy for classification of 22 species with a training data set of 660 images. The algorithm was based on feature extraction, with the help of the Canny Edge Detector and SVM Classifier.

      Li et al. (2020) have compared multiple convolutional neural networks for recognizing crop pests. The used dataset consisted of 5629 images and was manually collected. They found that GoogLeNet outperformed VGG-16, VGG-19, ResNet50 and ResNet152 in terms of accuracy, robustness and model complexity. As input RGB images were used and in the future infrared images are also an option.

      Riehle et al. (2020) give a novel algorithm that can be used for plant/background segmentation in RGB images, which is a key component in digital image analysis dealing with plants. The algorithm has shown to work in spite of over- or underexposure of the camera, as well as with varying colours of the crops and background. The algorithm is index-based, and has shown to be more accurate and robust than other index-based approaches. The algorithm has an accuracy of 97.4% and was tested with 200 images.

      Dos Santos Ferreira et al. (2017) created data by taking pictures with a drone at a height of 4 meters above ground level. The approach used convolutional neural networks. The results achieved high accuracy in discriminating different types of weeds. In comparison to traditional neural networks and support vector machines deep learning has the key factor that features extraction is automatically learned from raw data. Thus it requires little by hand effort. Convolutional neural networks have been proven to be successful in image recognition. For image segmentation the simple linear iterative clustering algorithm (SLIC) is used, which is based upon the k-means centroid based clustering algorithm. The goal was to separate the image into segments that contain multiple leaves of soy or weeds. Important is that the pictures have a high resolution of 4000 by 3000 pixels. Segmentation was significantly influenced by lightning conditions. The convolutional neural network consists of 8 layers, 5 convolutional layers and 3 fully connected layers. The last layer uses SoftMax to produce the probability distribution. ReLU was used for the output of the fully connected layers and the convolutional layers. The classification of the segments was done with high robustness and had superior results to other approaches such as random forests and support vector machines. If a threshold of 0.98 is set to than 96.3% of the images are classified correctly and none received incorrect identification.

      Yu et al. (2019) argued that the deep convolutional neural networks (DCNN) takes much time in training (hours), and little time in classification (under a second). The researchers compared different existing DCNN for weed detection in perennial ryegrass and detection between different weeds too. Due to the recency of the paper and the comparison across different approaches it is a good estimation of the current state of the art. The best results seem to be > 0.98. It also shows weed detection in perennial ryegrass, so not perfectly aligned crops. However, only the distinction between the ryegrass or weeds is made. For robotics applications in agroforestry, different plants should be discriminated from different weeds.

      Wu et al. (2020) try to improve the functioning of vision-based weed control, and do this by taking a slower approach to visual processing and decision-making. Multiple overhead cameras are used, which are not suited for all types of crops. However, 3D vision is used, so the camera position might be modifiable. A note that should be added is that the test were done using sugar beets which are easy to recognize on camera.

      Piron et al. (2011) suggest that there are two different types of problems. First a problem that is characterized by detection of weeds between rows or more generally structurally placed crops. The second problem is characterized by random positions. Computer vision has led to successful discrimination between weeds and rows of crops. Knowing where, and in which patterns, crops are expected to grow and assuming everything outside that region is a weed has proven to be successful. This study has shown that plant height is a discriminating factor between crop and weed at early growth stages since the speed of growth of these plants differ. An approach with three-dimensional images is used to facilitate this. The classification is by far not robust enough, but the study shows that plant height is a key feature. The researchers also suggest that camera position and ground irregularities influences classification accuracy negatively.

      Weeds hold particular features among: fast growth rate, greater growth increment and competition for resources such as water, fertilizer and space. These features are harmful for crops growth. Lots of line detection algorithms use Hough transformations and the perspective method. The robustness of Hough transformations is high. The problem with the perspective method is that it cannot accurately calculate the position of the lines for the crops on the sides of an image. Tang et al. (2016) propose to combine the vertical projection method and linear scanning method to reduce the shortcomings of other approaches. It is roughly based upon transforming the pictures into binary black- and white pictures to control for different illumination conditions and then drawing a line between the bottom and top of the image such that the amount of white pixels is maximized. In contrast to other methods, this method is real-time and its accuracy is relatively high.

      Gašparović et al. (2020) discuss the use of unmanned aerial vehicles (UAV) to acquire spatial data which can be used to locate weeds. In this paper four classification algorithms are tested, based on the random forest machine learning algorithm. The automatic object-based classification method achieved the highest classification accuracy. Belgiu et al. (2016) have shown that the random forest machine learning algorithm is the best algorithm for the automation of classification as it requires very little parameters. Random forest algorithms were proposed by Breiman (2001).

      Espejo-Garcia et al. (2020) deal with weed classification through transfer learning, where pre-trained convolutional neural networks (Xception, Inception-Resnet, VGNets, Mobilenet and Densenet) are combined with more "traditional" machine learning methods for classification (Support Vector Machines, XGBoost and Logistic Regression), in order to avoid overfitting and providing consistent and robust performance. This provides some impressively accurate classification algorithms, with the most accurate being a combination of fine-tuned Densenet and Support Vector Machine.

      Different approaches might exist: machine vision methods and spectroscopic methods (utilizing spectral reflectance or absorbance patterns). With spectroscopic methods features such as water content, moisture or humidity can be measured. Field studies have shown that weeds and agricultural crops can be distinguished based on their relative spectral reflectance characteristics. Alchanatis et al. (2005) propose an image processing algorithm based on image texture to discriminate weeds from cotton. They used images hyperspectral images to perform basic segmentation between crop and soil. The authors used a robust statistics algorithm yielding an average false alarm rate of 15%. This is worse than newer existing options.

      Booij et al. (2020) researched autonomous robots that can combat against unwanted potato plants. Previous robots could not distinguish between the potato and beetroot plants. Using deep learning, this has now succeeded with a 96% success rate. A robot was developed which drives on the land and makes pictures, which are sent to a KPN-cloud through 5G. The pictures are then analyzed by the deep learning algorithm, and the result is sent back to the robot. This deep learning algorithm was constructed with a dataset of about 5500 labelled pictures of potato and sugar beet plants to train the system. Next, the robot combats the plants that have been detected as the unwanted potato plants using a spraying unit, which is instructed by the system. This development is already a big step forward, but the fault rate is still too large for the system to be put into practice.

      Raja et al. (2020) created a vision and control system that was able to remove most weeds from an area, without explained visual features of crops and weeds. It achieved a crop detection accuracy of 97.8%, and was able to remove 83% of weeds around plants. This seemed to be in a very controlled setting, however, and still works with mainly simple farms.

      Su et al. (2020) and Raja et al. (2020) investigated the use of specific signaling compounds to mark desired plants, so that weeds can be removed. This created a way of marking the plants with a "machine-readable signal". This could thus be used for automatic classification of plants. According to one of the studies, an accuracy of at least 98% was achieved for detecting weeds and crops. Further work still needs to be done to get this method practically functioning.

      Herck et al. (2020) describe how they modified farm environment and design to best suit a robot harvester. This took into account what kind of harvesting is possible for a robot, and what is possible for different crops, and then tried to determine how the robot could best do its job.


      Design

      This section elaborates on the design, which consists of multiple parts. The goal is to create detection software for a robot that is capable of weeding, thus some more information on the robot is needed to determine the design. Moreover, this section will elaborate on the type of solution that will be implemented in the software.


      Robot

      The software will depend on the robot design, therefore this section briefly elaborates on such a design. To keep costs as low as possible it is wise to create robots that can do multiple tasks, thus not only weeding. It will be assumed that such a general-purpose robot possesses a RGB-camera, to take pictures and/or videos. It is assumed that the robot will take the form of a land-vehicle instead of an unmanned aerial-vehicle (UAV). This decision is made because for the specific context an UAV would not be appropriate. In a latter stage of the farm, the trees would pose serious restrictions to the flying path. The trees will form obstacles, which the drone will have to avoid. Moreover weeds or bushes grow on the ground, so it could be that the tree blocks the line of sight to such weeds. It could be that the UAV therefore has to constantly adapt the flying height, which would yield inconsistency in the gathered data and presumably negatively affect the classification accuracy. Because of these reasons it has been decided to focus on a land-vehicle. This distinction is important as it influences the type of data that is gathered, and thus for which type of data the software should be designed for. Thus the data gathered consists of pictures from the side, slightly above the ground. Moreover, such a robot would need a particular speed to cover the farm by itself. Weeds grow and within 2 or 3 days they are clearly visible and easily removable. Because the weeding task will be only one of the tasks of such a robot it will be important that the classification can be done quickly. It is clear that it should be able to cover the farm in under 2 days. Another important factor which influences the available time is lightning. For now it is assumed that it can only work when there is natural light, so created by the sun. Thus it can only work with daylight, for which the duration in various parts of the world might differ according to the time of year. All these factors combined argue for the need of quick identification.


      Software

      For image classification multiple approaches exist. This section elaborates on the choice that is made for a specific approach to be implemented. From above section it is clear that the implementation should have relatively quick identification times and for which type of data it should work. Moreover, as stated in the requirements section, the goal is to get an as high as possible classification accuracy. There are different approaches to such a computer vision task. Particularly aimed at plant or weed recognition the approaches include: support vector machines (SVM), random forests, adaboost, neural networks (NN), convolutional neural networks (CNN) and convolutional neural networks using transfer learning.

      Worth noting is that not all of these classifiers were trained using the actual input image. Some researchers choose to first segment the image in different regions and feeding those segments for classification. Dos Santos Ferreira et al. (2017) used SLIC for segmentation of images, which is based upon the k-means algorithm. More recently, Riehle et al. (2020) were able to distinguish plants from the background with 98% accuracy using segmentation. The importance of segmentation is that by using it the position of the weed can be derived, which is of course crucial if the weed has to be removed.

      Kounalakis et al. (2018) achieved 89% classification accuracy with the SVM approach to recognize weeds and Salman et al. (2017) achieved an 85% accuracy using the same approach for leaf classification and identification. Gašparović et al. (2020) have achieved an 89% accuracy recognizing weeds using the random forests approach. Notable is that the researchers have implemented 4 different algorithms for the random forests approach and that the accuracy result is from the best implementation. Tang et al. (2016) found an accuracy of 89% for an ordinary neural network with the backpropagation algorithm. Li et al. (2020) achieved an accuracy of 98% recognizing crop pests using a CNN. Yu et al. (2019) found an accuracy larger than 98% recognizing weeds in perennial ryegrass using a CNN. Espejo-Garcia et al. (2020) used a CNN with transfer learning and evaluated different models. Taking the best model (with a SVM for transfer learning) they achieved a 99% accuracy. Comparing these numbers it is clear that the CNN generally achieves the best result. However, it must be taken into account that these classifiers have all been trained on different data sets and therefore comparing these numbers cannot fully argue for which approach is actually the best.

      Dos Santos Ferreira et al. (2017) tried to compare their CNN to a SVM, adaboost and a random forest. The CNN outperformed the other approaches in terms of classification accuracy. Since all approaches were tested on the same data set we can argue that CNN’s seem most appropriate to achieve a high classification accuracy. Now in this particular context false positives weigh more heavily than false negatives in weed identification, because the false negatives could be solved if the robot goes by the same plant more than once. However, removing a crop due to falsely identifying it as a weed could have larger negative effects if the robot passes the crops relatively frequently. Dos Santos Ferreira et al. (2017) also found an important property of their CNN. When setting a threshold in determining classification they were able to achieve an 96.3% accuracy, with no false positives. The researchers also noted that using deep neural networks removes the tedious task of feature extraction, because the features are automatically learned from the raw data. This might enlarge the CNN’s generalizability. To further argue for the use of a convolutional neural network two other factors should be evaluated, namely; time taken for classification and it ability to use this approach for land-vehicles. Yu et al. (2019) state that these deep convolutional networks (DCNN) take much time in training (hours), whereas classification is done in little time (under a second). Booij et al. (2020) made a driving robot that had an identification with 96% accuracy and it could drive up to 4 km/h. Notable is that the researchers were able to use 5G and cloud computing, which might be crucial for real-time identification. Moreover, Raja et al. (2020) have made a weeding robot with a crop detection accuracy of 97.8%. The land-vehicle was able to move up to a speed of 3.2 km/h. However, there is still quite a gap between the detection accuracy and the 83% of weeds removed in the controlled setting where it was tested. However these researches confirm the possibility of a land-vehicle. Lastly, implicitly it is proven that a CNN is suitable for agriculture. This implicit prove is done by noting that the researches named above all focus on agriculture. But also explicitly it is argued that CNN’s have proven to deliver good results in precision agriculture for identifying plants (Espejo-Garcia et al., 2020).

      References

      Afonso, M. V., Blok, P. M., Polder, G., van der Wolf, J. M., & Kamp, J. A. L. M. (2019). Blackleg Detection in Potato Plants using Convolutional Neural Networks. Paper presented at 6th IFAC Conference on Sensing, Control and Automation Technologies for Agriculture, AgriControl 2019, Sydney, Australia.

      Alchanatis, V., Ridel, L., Hetzroni, A., & Yaroslavsky, L. (2005). Weed detection in multi-spectral images of cotton fields. Computers and Electronics in Agriculture, 47(3), 243-260. doi:10.1016/j.compag.2004.11.019

      Bawden, O., Kulk, J., Russell, R., McCool, C., English, A., Dayoub, F., . . . Perez, T. (2017). Robot for weed species plant-specific management. Journal of Field Robotics, 34(6), 1179-1199. doi:10.1002/rob.21727

      Belgiu, M., Drăguţ, L. (2016). Random forest in remote sensing: a review of applications and future directions. ISPRS J. Photogramm. Remote Sens. 114, 24–31. https://doi:10.1016/j.isprsjprs.2016.01.011

      Booij, J., Nieuwenhuizen, A., van Boheemen, K., de Vissr, C., Veldhuisen, B., Vroegop, A., ... Ruigrok, T. (2020). 5G Fieldlab Rural Drenthe: duurzame en autonome onkruidbestrijding. (Rapport / Stichting Wageningen Research, Wageningen Plant Research, Business unit Agrosysteemkunde; No. WPR). Wageningen: Stichting Wageningen Research, Wageningen Plant Research, Business unit Agrosysteemkunde. https://doi.org/10.18174/517141

      Breiman, L. (2001). Random Forests. Machine Learning 45, 5–32. https://doi.org/10.1023/A:1010933404324

      Carvalho, L., & Von Wangenheim, A. (2019). 3d object recognition and classification: A systematic literature review. Pattern Analysis and Applications, 22(4), 1243-1292. doi:10.1007/s10044-019-00804-4

      Comer, S., Ekanem, E., Muhammad, S., Singh, S. P., & Tegegne, F. (1999). Sustainable and conventional farmers: A comparison of socio-economic characteristics, attitude, and beliefs. Journal of Sustainable Agriculture, 15(1), 29-45.

      Dos Santos Ferreira, A., Matte Freitas, D., Gonçalves da Silva, G., Pistori, H., & Theophilo Folhes, M. (2017). Weed detection in soybean crops using convnets. Computers and Electronics in Agriculture, 143, 314-324. doi:10.1016/j.compag.2017.10.027

      Duong, L.T., Nguyen, P.T., Sipio, C., Ruscio, D. (2020). Automated fruit recognition using EfficientNet and MixNet. Computers and Electronics in Agriculture, 171. https://doi.org/10.1016/j.compag.2020.105326

      Espejo-Garcia, B., Mylonas, N., Athanasakos, L., Fountas, S., & Vasilakoglou, I. (2020). Towards weeds identification assistance through transfer learning. Computers and Electronics in Agriculture, 171, 0168-1699. https://doi.org/10.1016/j.compag.2020.105306

      Finger, R., Scott M. S., Nadja El B., and Achim W. 2019. “Precision Farming at the Nexus of Agricultural Production and the Environment.” Annual Review of Resource Economics 11(1):313–35.

      Gašparović, M., Zrinjski, M., Barković, D., & Radočaj, D. (2020). An automatic method for weed mapping in oat fields based on UAV imagery. Computers and Electronics in Agriculture, 173, 0168-1699. https://doi.org/10.1016/j.compag.2020.105385

      Haggblade, S., Smale, M., Kergna, A., Theriault V., Assima, A. (2017). Causes and Consequences of Increasing Herbicide Use in Mali. Eur J Dev Res 29, 648–674. https://doi.org/10.1057/s41287-017-0087-2

      He, Kaiming; Zhang, Xiangyu; Ren, Shaoqing; Sun, Jian (2015). Deep Residual Learning for Image Recognition.

      Hemming, J., Barth, R., & Nieuwenhuizen, A. T. (2013). Automatisch onkruid bestrijden PPL-094 : doorontwikkelen algoritmes voor herkenning onkruid in uien, peen en spinazie. Wageningen: Plant Research International, Business Unit Agrosysteemkunde.

      Hemming, J., Blok, P., & Ruizendaal, J. (2018). Precisietechnologie Tuinbouw: PPS Autonoom onkruid verwijderen: Eindrapportage. (Rapport WPR; No. 750). Bleiswijk: Wageningen Plant Research, Business unit Glastuinbouw. https://doi.org/10.18174/442083

      Herck, L., Kurtser, P., Wittemans, L., & Edan, Y. (2020). Crop design for improved robotic harvesting: A case study of sweet pepper harvesting, Biosystems Engineering, 192, 1537-5110. https://doi.org/10.1016/j.biosystemseng.2020.01.021.

      Koh, Lian Pin. (2010). Agroforestry Implications. Biotropica 42(6):760–60.

      Kounalakis, T., Triantafyllidis, G. A., & Nalpantidis, L. (2018). Image-based recognition framework for robotic weed control systems. Multimedia Tools and Applications, 77(8), 9567-9594. http://dx.doi.org/10.1007/s11042-017-5337-y

      Li, Y., Wang, H., Dang, L.M., Sadeghi-Niaraki, A., & Moon, H. (2020). Crop pest recognition in natural scenes using convolutional neural networks. Computers and Electronics in Agriculture, 169, 0168-1699. https://doi.org/10.1016/j.compag.2019.105174

      Ministerie van Landbouw, Natuur en Voedselkwaliteit. (2019). Landbouwbeleid. Consulted from: https://www.rijksoverheid.nl/onderwerpen/landbouw-en-tuinbouw/landbouwbeleid

      Perrins, J., Williamson, M., & Fitter, A. (1992). A survey of differing views of weed classification: implications for regulation of introductions. Biological Conservation, 60(1), 47-56.

      Pingali, P.L. (2001). Environmental consequences of agricultural commercialization in asia. Environment and Development Economics, 6(4), 483–502

      Piron, A., van der Heijden, F. & Destain, M.F. Weed detection in 3D images. Precision Agric 12, 607–622 (2011). https://doi-org.dianus.libr.tue.nl/10.1007/s11119-010-9205-2

      Plourde J.D, Pijanowski B.C, & Pekin B.K. (2013). “Evidence for Increased Monoculture Cropping in the Central United States.” Agriculture, Ecosystems and Environment 165:50–59.

      Raja, R., Nguyen, T.T., Slaughter, D.C., Fennimore, S.A. (2020). Real-time robotic weed knife control system for tomato and lettuce based on geometric appearance of plant labels. Biosystems Engineering, 194, 1537-5110. https://doi.org/10.1016/j.biosystemseng.2020.03.022

      Raja, R., Nguyen, T.T., Slaughter, D.C., & Fennimore, S.A. (2020). Real-time weed-crop classification and localisation technique for robotic weed control in lettuce. Biosystems Engineering, 192, 1537-5110. https://doi.org/10.1016/j.biosystemseng.2020.02.002

      Riehle, D., Reiser, D. & Griepentrog, H.W. (2020). Robust index-based semantic plant/background segmentation for RGB- images. Computers and Electronics in Agriculture, 169, 0168-1699. https://doi.org/10.1016/j.compag.2019.105201

      Russakovsky, Olga; Deng, Jia; Su, Hao; Krause, Jonathan; Satheesh, Sanjeev; Ma, Sean; Huang, Zhiheng; Karpathy, Andrej; Khosla, Aditya; Bernstein, Michael; Berg, Alexander C.; Fei-Fei, Li (2015). ImageNet Large Scale Visual Recognition Challenge. International Journal of Computer Vision.

      Salman, A., Semwal, A., Bhatt, U., Thakkar, V.M. (2017). Leaf classification and identification using Canny Edge Detector and SVM classifier. 2017 International Conference on Inventive Systems and Control (ICISC), Coimbatore, pp. 1-4.

      Su, W., Fennimore, S.A., & Slaughter, D.C. (2020). Development of a systemic crop signalling system for automated real-time plant care in vegetable crops. Biosystems Engineering, 193, 1537-5110. https://doi.org/10.1016/j.biosystemseng.2020.02.011

      Tang, J. L., Chen, X. Q., Miao, R. H., & Wang, D. (2016). Weed detection using image processing under different illumination for site-specific areas spraying. Computers and Electronics in Agriculture, 122, 103-111.

      Wu, X., Aravecchia, S., Lottes, P., Stachniss, C., & Pradalier, C. (2020) Robotic weed control using automated weed and crop classification. J Field Robotics, 37, 322– 340. https://doi.org/10.1002/rob.21938

      Yu, J., Schumann, A., Cao, Z., Sharpe, S., & Boyd, N. (2019). Weed detection in perennial ryegrass with deep learning convolutional neural network. Frontiers in Plant Science, 10, 1422-1422. doi:10.3389/fpls.2019.01422

      Who has done what


      Week 1:

      Name (ID) Hours Work done
      Hilde van Esch (1306219) 11 Intro lecture + group formation (1 hour) + Meetings (3 hours) + Brainstorming ideas (1 hour) + Literature research (4 hours) + User (2 hours)
      Leighton van Gellecom (1223623) 13 Intro lecture + group formation (1 hour) + Meetings (3 hours) + Brainstorming ideas (1 hour) + Literature research (6.5 hours) + Problem statement (1.5 hours)
      Tom van Leeuwen (1222283) 9 Intro lecture + group formation (1 hour) + Meetings (3 hours) + Brainstorming ideas (1 hour) + Literature research (2 hours) + Approach, milestones and deliverables (2 hours)
      Karla Gloudemans (0988750) 15 Intro lecture + group formation (1 hour) + Meetings (3 hours) + Brainstorming ideas (1 hour) + Literature research & State of the Art combining (9 hours) + Typing out minutes (1 hour)
      Timon Heuwekemeijer (1003212) 9 Intro lecture + group formation (1 hour) + Meetings (3 hours) + Brainstorming ideas (1 hour) + Literature research (4 hours)

      Week 2:

      Name (ID) Hours Work done
      Hilde van Esch (1306219) 4.5 Meetings (2.5 hour) + Reviewing wiki page (1 hour) + User (1 hour)
      Leighton van Gellecom (1223623) 4.5 Meetings (2,5 hours) + Python recap/OOP (2 hours)
      Tom van Leeuwen (1222283) 4 Meetings (2.5 hours) + Requirements (1.5 hours)
      Karla Gloudemans (0988750) 6 Meetings (2,5 hours) + Create database of weeds (3,5 hours)
      Timon Heuwekemeijer 4,5 Meetings (2,5 hours), create a planning (2 hours)


      Week 3:

      Name (ID) Hours Work done
      Hilde van Esch (1306219) Meetings (1.5 hour) + Create database of 2 weed species (1 hour) + Install all the programs for the project (3 hours)
      Leighton van Gellecom (1223623) 15 Meetings (1.5 hours) + Design section (4.5 hours) + TensorFlow installation /trouble (4.5 hours) + Tensorflow introduction (2.5 hours) + Data acquisition (2 hours)
      Tom van Leeuwen (1222283) 4.5 Meetings (1.5 Hours) + Data Acquisition (3 Hours)
      Karla Gloudemans (0988750) 5,5 Meetings (1,5 hour) + Create database of 2 weed species (3 hours) + Install all the programs for the project (1 hour)
      Timon Heuwekemeijer 9,5 Meetings (1,5 hours), Creating and troubleshooting a collaborative development environment(5 hrs), collect database (3 hours)


Retrieved from "https://dsdwiki.wtb.tue.nl/index.php?title=PRE2019_4_Group2&oldid=95373"