PRE2018 3 Group5

From Control Systems Technology Group
Jump to navigation Jump to search


Group members

Name Student ID
Ruben Haakman 0993994
Stan Latten 1257196
Tom Mulders 1008890
Jasper Stam 1006240
Mathijs Vastenhouw 1269496

Meaning of used colors

Colors should be removed in the final version. They are to make changes and remarks better visible

  • Yellow background: remark what has to be done in section (maybe not directly possible).

Abstract

Project setup

Approach

After reviewing the literature, we will determine the requirements for the system. Based on these requirements we will investigate implementations for these requirements and analyse their suitability. We will analyse the costs associated with a solution and compare this to the current costs of using pesticides, the effects on the stakeholders and on the future of farming. Finally we will conclude with a recommendation for or against the automated removal of weeds on farm fields without the use of pesticides and recommend future research topics.

Milestones

  • State-of-the-art analysis
  • Requirements Document
  • Use analysis
  • Implementation propositions
  • Implementation analysis
  • Cost analysis
  • Conclusion

Deliverables

  • Requirements document
  • Implementation document
  • Use analysis
  • Cost analysis
  • Conclusion

Planning

planning

Task division over weeks

Week 2

  • Arguments for problem - Everyone
  • Concrete planning - Jasper
  • Goal of the project, some introduction for project. Little story - Mathijs
  • State of the Art analysis - Ruben
  • Start with requirements - Stan
  • USE analysis - Tom
  • Function definition - Everyone
  • Concepts for functions - Everyone

Week 3

  • Contact zoeken - Mathijs
  • State of the Art aanpassen - Ruben
  • Problem statement aanpassen - Tom
  • Nieuwe state of the Art content - Tom, Jasper
  • Idee voor grijper - Stan

Week 4

  • Contact boeren, domeinkennis onkruid - Mathijs
  • Contact onderzoekers - Mathijs, Stan
  • Vragenlijst - Jasper
  • Requirements - Jasper
  • User analysis - Tom
  • Movement system - Ruben

Week 5

  • Update wiki general info - Tom
  • Literature study/refer to articles
    • Weed - Ruben
    • Navigation - Tom
    • All other functions (charging, mobility, communication) - Jasper
  • Visit greenhouse (inclusive preparation and reporting on wiki) - Mathijs, Stan
  • Requirements (after visit greenhouse) - Jasper, Tom
Update after Friday meeting
  • Update structure of Wiki - Jasper
  • Structure of State of the art (not grouped on name, sources notation etc.) - Jasper
  • Function definition update - Jasper
  • Report on visit farmer - Stan, Mathijs
  • Requirements - Tom
  • Modeling of solution - Stan, Mathijs
  • Function definition navigation - Tom
  • Literature study weed - Ruben
  • Planning - Tom

Week 6

  • UI - Jasper
  • Communicatie user - Jasper
  • Weed container - Jasper
  • STOA - Jasper
  • Cost analysis, lease, etc - Tom
  • Visualisatie - Mathijs, Stan
  • Design arm/gripper - Mathijs, Stan
  • Weed detection, types of weeds, interval - Ruben
  • Planning - Tom
  • Target User, schets operation - Tom
  • Safety - Ruben
Update after Friday meeting
  • Change UI mockup - Jasper
  • Topics presentation - Jasper
  • Cost analysis - Tom
  • Target user - Tom
  • Schets operation - Tom
  • Weed detection etc. - Ruben
  • Safety - Ruben
  • Modeling design - Mathijs, Stan

Problem

When farmers grow crops, the have to deal with weeds growing on their fields in between their crops. To remove these weeds, pesticides are used. These pesticides can be harmful to insects, animals and humans and might even contaminate (ground)water. Clearly an alternative is needed.

Problem statement

In the current situation, a lot of pesticides are used in farming. These pesticides are used for treating bugs and diseases, but also for weeds. With the trend to be more environmentally friendly, we are looking for alternatives for pesticides and big farm trucks. A possible solution for this problem is a cooperation of small autonomous farming machines, which can control a field together. However, this solution is not new, people have already been working on the navigation of these small machines and on the detection of weeds in fields of crops. [1] That’s why we will try to make a weed picking device to be able to pick weeds without damaging the crops. For these small devices, we see future in the vertical agriculture as well, because they allow for a higher field density.

[1] https://ieeexplore.ieee.org/document/6740018

State of the Art

Finding articles

Article about a trash collecting robot (team). It is about office cleanup, but with some changes the technique can also be relevant for outside use. It is about a competition. One document describes the solution of the winning team, the other gives some more information about the competition.[1][2]

A patent for sucking and filtering for a dust collection vehicle.[3]

A patent for an autonomous lawn mower robot. Also about navigating over the lawn.[4]

Paper about weed control, describing navigating through specific areas, detecting weed with a camera, making weed maps and spraying weed.[5]

A patent for a snow sweeper for sidewalks.[6]

Paper about the design of an autonomous vacuum cleaner.[7]

Paper about pathing algorithms for autonomous vacuum cleaner robots. [8]

Analysis of snow melting approaches.[9]

Paper about machine vision application for weed removal.[10]

Analysis of pavement maintenance methods.[11]

Research into small (< 20kg) urban robots for disaster relief.[12]

Small summary of robots in farming[13]

Autonomous tractors[14]

Paper about navigation on pavements, avoiding litter, pedestrians and bicycles.[15]

Paper about asphalt analysis, to detect whether the road needs maintenance. This paper was actually meant for airborne sensing, but could be used by our robot as well.[16]

Paper about stair-climbing methods for robots, useful for our robot to easily get on or off the pavement.[17]

Article about weather forecasting in the road [network. Could be used by our robot to predict which task it has to do (e.g. de-icing the road)[18]

Paper about autonomous docking at a recharging station for autonomous vehicles in general[19]

Article about an autonomous cleaning robot for outdoor use, including path-finding and memory of cleaned areas[20]

Article about different kind of weeds[21]

Patent for communication of an autonomous sidewalk robot[22]

Patent for an autonomous neighborhood vehicle controllable through a neighborhood social network[23]

Patent for a system and method for navigating an autonomous vehicle using laser detection and ranging[24]

Paper about autonomous vehicles navigating trough sidewalks buildings and hallways[25]

Paper about an Autonomous Robot for Garbage Detection and Collection[26]

Paper about multiple robots in smart city applications[27]

Paper on small autonomous robots working together to do big tasks.[28]

Paper on autonomous navigation on crowded sidewalks.[29]

Paper on robot navigation in highly populated pedestrian zones.[30]

Paper on human-robot interaction in urban environments.[31]

Paper on the design of a litter collecting robot.[32]

Article on electric snow removal by placing heating mats.[33]

Paper about an algorithm that can detect weeds and also classify it.[34]

Paper about weed recognition trough image processing.[35]

Paper about mechanical weed removal.[36]

Paper about an intelligent mechanical weeding machine[37]

Paper where test for mechanical weed control in greenhouses work[38]

Thesis on weed control. Very interesting also techniques for removing weed are discussed[39]

Paper about a robot for plant-species–specific weed management using mechanical or chemical module to remove the weed[40]

Paper about different methods for non-chemical weed control[41]

Paper about the complete design of an autonomous weeder robot platform[42]

2 Papers about mechanical removing weed between plants[43][44]

Analysis of found articles

We found reports complete farming robots that are fighting weed. Some of these robots are spraying pesticide to fight weed. Our intention is to not use pesticides, but remove the weed mechanically. The reports are on robots that can be used in other farming disciplines, for example outside vegetable growing and in greenhouses. In those reports there is useful information about different important topics for us, like navigation and weed recognition. Examples of those reports are[5][42]

Navigation

Navigation is an important topic. The robot should be able to find its way trough the fields in which it operates. Navigation is not only finding a route, such that the complete field is covered, but also the lifespan of the battery has to be taken into account and obstacles has to be avoided. We found several papers on navigation, both in farming and other robotic areas. The navigation in other robotic areas can be useful for the way of navigating in farming, because of similarities.[1][2][4][5][8][12][15][20][24][25][29][30][31]

Recognition of weed

The robot has to detect weed autonomously. The robot has to remove only the weed and not the good vegetation. For this end, artificial intelligence is needed. When the robot detected the weed, it can move the arm with the tool to the weed and remove it. We found some papers about detection of weed. Those papers show that weed can be detected and that weed can be differentiated from crops. For this robot, this thing cannot be copied one to one from another application, but the same methodology can be followed to make weed recognition from a camera working on this robot. This is, because in this area, there appear other types of weed.[1][2][5][10][26][34][35]

Collaboration of different robots

When the robot is applied on a larger scale, it can be that multiple robots have to work together. When robots work together, they have to communicate to each other, because if they don't do that, situations can appear that they are constantly waiting for each other and they are not efficient. It can even be that the robots recognize each other as an unknown obstacle and stop with their task for safety. To prevent this, we found also some articles about robot collaboration, such that we can think about a way of controlling the robot, such that it can work together.[1][2][27][28]

Weed control

Research into weed is very important. We have to know which types of weed there are and how we can remove it. The robot should also not damage the crops. We also have to know with which frequency the robot has to maintain the fields, to keep it, until an acceptable level, free of weed. We also found papers about types of weed in our case and papers on how to remove wee mechanically.[21][36][37][38][39][40][41][43][44]

General design of robot

To get an idea for a design for a robot, we found some papers on different kinds of robots. From those papers we maybe can use information for our design.[5][7][13][14][17][22][23][25][42]

Battery and charging

Our robot has to be provided with energy. We also did some research into charging.[19]

Current situation

To know the environment in which the robot has to work, we contacted a potential user. In his fields, we could see some examples of obstacles and weed and we know how big the robot can be and on what surface it has to drive. We also asked the potential user how he currently fights the weed and asked about his knowledge about weed and the crops. For more information, see this section.

Users

USE Analysis

In this analysis we will first sketch the ideal operation of the robot: its functionality and deployment. Then we will analyse the effects and implications of the robot for each of the following stakeholders: Farmers, consumers, governments, society.

Functionality and deployment The robot operates exclusively on fruit orchards. It removes weeds from in between the trees, without damaging the trees and without using pesticides.

Stakeholders Farmers: First of all, farmers will no longer have to purchase pesticides, but will have to buy and maintain the robot. While the upfront cost of a (set of) robot(s) might be bigger than the cost of pesticides, the maintenance cost will be lower and hence will be more cost effective in the long run. Without the use of pesticides, farmers will no longer have to worry about any of the negative effects of the pesticides and hence will never suffer the consequences of potentially harmful product. Farmers may see an increase in demand and hence revenue, as people are potentially more inclined to buy pesticide-free products. Removed weeds can potentially be used as fertilizer, fuel or fodder, further highlighting the financial benefits.

Consumers: No pesticides on food suggests healthier food and hence healthier and happier consumers. Since no pesticides have to be purchased, the product are cheaper. No pesticides in orchards reduces the chances of accidental consumption of contaminated produce by for example dogs. The means consumers have less to worry about and are generally more happy.

Governments: Do not deal with the consequences of harmful product, contaminated (ground) water etc. Reduced costs for farming will allow poor government to produce more food, reducing famine.

Society: Less pesticides implies healthier ecosystem, hence better world to live in. More cost-effective farming means more money for other sectors such as healthcare. More cost-effective farming means more food and less famine.

Target user

Embed User in USE analysis

The document describes potential user groups, and discusses which solutions fit which customer and on which customer we will focus. In general, our product is aimed towards farmers who can deploy the robot on their orchards. However, there are different kind of farms and different kind of farmers. By the nature and purpose of the robot, it should be evident that robot is aimed towards farmers who grow fruit trees and experience negative effects from weed growth on their fields. This excludes farmers who only keep animals, or do not have a weeds growing on their fields (like in greenhouses). Hence the main prospective user group is farmers who grows fruit trees outside (so not in a greenhouse or anything alike).

We can identify multiple different type of farms in this subgroup, however. Open farms: farms with their fields scattered around the area, where the areas between the farms can contain roads, buildings or other entities, not owned or controlled by the user. On such farms, the environment is highly variable and uncontrolled. People or animals can be found around or even on the fields. Closed farms: farms with their fields on a single, or set of, properties owned and managed by the user. These properties are closed for the public and the environment is controlled. Anything that happens on the farm can be controlled and adjusted in a way the user desires. Next-gen automated farms: farms which are in an experimental phase and are aimed towards full automation. As such, these farms are designed and managed for and by robots. Outside interaction is (very) limited. Conditions are controlled. (example: pixel farming)

Each of these user groups will require the robot and autonomous system we are discussing to behave differently. For open farms, a user must either pick up the robots from fields and place them at fields themselves, or the robot must be able to maneuver public grounds and roads autonomously. Moverover, each field or set fields that is disconnected from other fields, must either have a charging and emptying point, or the user must manually move the robots to such points. Or even have to empty and charge the robot manually. Clearly, a fully autonomous robot could do such things autonomously, but for the near future such autonomy does not exist yet. Designing, implementing, and testing it would cost a lot of time and money and hence we decide to not offer such autonomy. The user-unfriendly nature of manual pick-ups and drop-offs of the robots is unlikely to appeal to any real customer, and as a result, we will not focus on this user group our system. As far as closed farms are concerned, an automated system is easier to realise. The movement between fields, charging and emptying points is not hindered by any entities, assuming the user enables this: proper briefing of staff and keeping routes obstacle free will allow an automated system to function effectively. Given this, our robot system will be able to operate effectively and efficiently: since we do not offer full autonomy, the routes in between fields, charging and emptying points will have to be provided to the system, as such, these routes should be kept fully accessible at all time. In conclusion, closed farms are a consideration for the main target group for this project.

Finally, there is next-gen automated farms. By the nature of these farms, our robot would be a perfect fit in such environments. Hence such farms are a consideration for the main target group for this project.

In order to maximize the number of potential users, and the experimental nature of “next-gen” farming, we have chosen to focus our product towards closed farms. Moreover, from our interview with a farmer with a fruit orchard, we have concluded that a fruit orchards is the ideal farm for a first-generation automated weeding system, which we aim to design.

Contact with users and other research teams

Availability

  • Tom: maandag middag, dinsdag, donderdag middag
  • Jasper: maandag middag, dinsdag ochtend niet 19-2, woensdag ochtend, donderdag middag
  • Ruben: Maandag middag, woensdag vanaf 13 maart, donderdag 21 en 28 maart, vrijdag middag
  • Mathijs: Maandag middag, dinsdag middag niet 26, woensdag, donderdag.
  • Stan: Maandag middag, dinsdag middag, woensdag, donderdag.

Questions

We came up with some questions that we have for a potential user and for other research teams.

User

  • Is weed a big problem?
  • How do you currently fight weed?
  • How how many time costs it take to fight weed?
  • How many people are needed to fight weed?
  • What is the planning in removing weed? i.e. after how many time should you start again with the fields, how many times a season do you need to go over each field.
  • How big is the area in which weed should be removed?
  • Are all the locations reachable without using public roads?
  • Are there many animals such as rabbits, birds in the fields?
  • Which tools do you use currently?
  • What is the cost of the tools and how long do they last?
  • What it the cost of the people that are removing the weed?

Other researchers

  • What are the main advantages of fighting weed with robots?
  • What is the main problem of pesticides?
  • What is the current solution, you have?
  • What is the weight of that solution?
  • How many energy consumes the current solution?
  • Is the solution dependent on the type of crop and on other circumstances?

Beltech contact log

We called Beltech to ask if it was possible to interview them about the possibilities of a mechanical weeds removal tool for use on the farm fields. Ron van Dooren, head marketing answered and he told us that there were possibilities for us and that Richard Vialle knew all the details about their weeds removal machine and that he should help us. We should send a mail to info@beltech.nl containing what our expectations for them were and what we wanted to know. This mail was sent and then on Monday 04-03-2019 we got a confirmation that the mail was received and that it was forwarded to Richard Vialle. He would reply to our request and help us further.

As we did not receive any reply from our mail, we contacted Beltech again to ask if they had taken a look at our mail. On the phone, we were told that both Ron van Dooren and Richard Vialle were not available and that sending a mail would be the fastest way to contact the right person. After the call, we sent another mail asking if they had taken a look at our request and Ron van Dooren replied, stating that he would remind Richard Vialle to answer us. This mail was received on Thursday 14-03-2019. From there on, we have not received a reply from Richard Vialle. In the previous mail we sent, we also included all dates and times where we would be available for an appointment, for them to pick a right time. This was done to speed up the communication as we do not have much time left if we want to incorporate their information into our project.

Interview

Overview of situation
Twigs that should be removed
Obstruction by dead tree and dead weeds
Obstruction by tree trunks
Obstruction by broken guide wood

Interview with the Farmer

We went to a farmer and came to the conclusion that greenhouses are not the right location for our robot plans and ideas. However, for the outside fruit cultivation it could be very useful. We got the tip to look at fruit trees like apples, pear and cherries, instead of his strawberries. These are grown in the neighborhood as well. We found a fruit farmer who was willing to tell us something about his farming and he answered all our questions. After the interview we went to have a look in the fields. We made pictures of the situation and from a lot of the common obstructions. This gives us a good image for making a model of the environment we are facing.

  • Is weed a big problem?

Weed is quite an issue as it takes away moisture and nutrients from the crops growing and thus having a negative impact on harvest rates as the crops cannot grow as good as they would without weeds.

  • How do you currently fight weed?

We are currently using herbicides to fight the weeds. As the biggest problem we have is actually the weed couch-grass, which is found everywhere around the trees, removing this manually without the use of herbicides is almost impossible as it is a very time consuming task.

  • How much time does it take to fight weed?

We can treat the complete farm with herbicides in a couple of hours. However, before we can do the treatment, the land has to be dry and the weather forecast should not give any rain for the coming day, in order for the herbicides to do their work.

  • How many people are needed to fight weed?

To apply the herbicides to the farmland, we drive in between the tree rows with a small tractor, including a trailer which contains a tank with the herbicide mixture and a spraying device which sprays the herbicides just next to the trees.

  • What is the planning in removing weed? i.e. after how many time should you start again with the fields, how many times a season do you need to go over each field.
  • How big is the area in which weed should be removed?
  • Are all the locations reachable without using public roads?
  • Are there many animals such as rabbits, birds in the fields?
  • Which tools do you use currently?
  • What is the cost of the tools and how long do they last?
  • What it the cost of the people that are removing the weed?

Function definition

RPCs

Requirements

  • The system recharges autonomously
  • The system must be able to differentiate crops from weeds
  • The system removes weed from the farm field and collects it for disposal
  • The system moves itself around the farmfield, following a predefined pattern unique for each farmfield
  • The system must not be harmful for the crops
  • The system detects obstructions in its path
  • The system can notify users on its status
  • The system can carry weeds

Preferences

  • The system can operate for a long time before having to recharge
  • The system should make minimal errors in recognizing weeds
  • The system should damage its surroundings as less as possible

Constraints

  • The system is more cost-efficient than human workers
  • The system is more cost-efficient that using pesticides
  • The system traverses the field autonomously
  • The system goes to recharge, before running out of battery charge
  • The system does not use pesticides

Weed control

Good weed control is important for farmers in order to maximize their yields. Weeds can decrease the amount of space, light, water and nutrients available for the crops. Weeds can also act as a shelter for insects and other animals like rats and mice. It is necessary to remove these weeds and prevent them from growing. Weed control has become an important part in farming because it has a big impact on the amount which can be harvested from the plants.


Weeds can be divided into three groups:

  • Annual weeds: These weeds spread by seed and have a lifespan of one year, but produce a lot of seeds for the next year.
  • Biennial weeds: lifespan of two years. The grow only a cluster of leaves in the first year. The second year it produces flowers and seeds after which it will die.
  • Perennial weeds: Those weeds have big roots underground, so they are able to survive multiple years. Even if the part above the ground is removed, it will grow again the next year. These weeds are therefore the hardest to control.


Examples of some of the most common weeds:

  • Cleavers (annual weed)
  • Thistles (biennial weed)
  • Stingnig nettles (perennial weed)
  • Couch grass (perennial weed)


Types of weed control:

  • Cultural: Prevents the weeds from growing by reducing open spaces where weeds can grow by placing the desired plants close to each other. This method can be used in gardens but isn’t practical at farming because most crops need enough space between each other.
  • Mechanical: Pulling out or damaging the weeds causing them to die. These methods are effective but often time consuming. Pulling out the weed including the roots is one of the most effective ways. However, this is very time consuming since it must be done by hand. Ploughing the ground uproots weeds and causing most of them to die. This can be done with a machine, but some weeds can still continue growing if their roots aren't damaged.
  • Chemical: Using pesticides which kill the weeds but not the desired plants. This method is less time consuming but doesn’t work with all weeds and can be harmful for the environment. Farmers spray the chemicals mostly with a big machine on the weeds. This can only be done when there isn't too much wind.


Navigation around the farmfield

As described in the problem statement, the robot should be able to move autonomously. For this document, we will investigate 1. how the robot autonomously maneuvers through orchards, covering it fully and 2. How the robot operates when it needs to charge, needs to empty its container or has finished working a field.

For the autonomous maneuvering across fields we consider the following approaches: Full autonomy: the robot will given a field, determined by GPS coordinates, autonomously decide a(n) (optimal) route to fully cover a field. Semi-autonomy: the robot will follow set route, obtained from GPS data generated by the user or provider of the robot. For both approaches the robot will automatically detect obstacles including humans and animals and halt operation temporarily.

Full autonomy is highly desirable, as this improves the portability of the robot, reduces overhead for client and provider and potentially increases efficiency, in cases where a provided route is not optimal. However, full autonomy is hard to achieve, bears greater upfront costs and potentially is not cost-effective at all. Semi-autonomy, on the other hand, is cheaper and easier to implement, as following a set GPS route is near trivial. However it has the overhead that a GPS route has to be determined before operation can commence. Determining a (good) GPS is not hard, but costs time and effort, and has to be done for every individual field. As discussed in paper 14, determining a route for a tractor is not hard, it only requires the user to drive the desired route and then the autonomous system can replicate it, however in this use case, where the robot potentially is small, this would require a user to either use specialized equipment to determine a route, such as a remote drone, or to walk the route, which is less desirable. It is out of scope to fully design a system whichs creates a GPS route for the robot, however a solution similar to the method in paper 14 is suitable and technologically possible.

Additionally, for bigger fields, a group of robots working together can be more cost-effective. In the case of fully autonomous robots, this means the robots must communicate and delegate parts of the field to each other. Depending on the implementation this can be done efficiently. Each robot could for example mark the visited coordinates or sectors on a shared digital data structure. Other robots can then avoid this areas and avoid doing extra work. Alternatively, at the initialization of the job, the robots could negotiate a sector of the field to be assigned to them and basically divide and conquer the work, as if the field was actually multiple small fields, worked by a single robot. Either way, this cooperation seems only marginally, if at all, more difficult than creating a fully autonomous robot and as such does not play for or against the fully autonomous system for deployment on bigger fields. As far as the semi-autonomous system is concerned, a possible cooperation technique for multiple such robots operating on the same big field could be a equal division of the pre-set path among all the cooperating robots. In conclusion, the size of the field does not particularly favor either implementation. Nevertheless, for an initial implementation, a single robot will work alone.

Next to the size of the field, let us look at how the shape of the field impacts our design decision. First of all we have (near) rectangular fields. Arguably, such fields are easier to handle, both for (semi-) autonomous as well as non-autonomous systems, than irregular fields. One simple, but possibly suboptimal, manner of dealing with (near) rectangular fields is to drive the full length (or width) of the fields, turn around and repeat until the entire field has been covered. For a semi-autonomous system, such an approach can be created easily as discussed in paper 14. For fully autonomous system, such a field should also be easy to operate on, as in the worst case, it should be able to do exactly the same as a semi-autonomous system; a simple reflex agent, which turns around once detects the field border (via GPS or some other feature) and some termination conditions might even suffice. Let us then turn to irregular field shapes. Currently, farmers are already dealing with irregular fields manually, as such a semi-autonomous system can be given a route without any issues. For autonomous systems, however, irregular fields might prove to be more challenging. Of course, this depends on the quality of the AI, but performance might be lower in the worse case (an approach might for example be a semi-bruteforce of the field), than the performance of a semi-autonomous system, but in the best case this might be better. Either system is able to handle an irregular field, but the performance of the autonomous system is heavily reliant on the quality of the AI and should be investigated for a conclusive recommendation. For the fruit orchard use case, however, the structure of the field is somewhat easier: a set of lines of trees can be followed by the robot to operate, meaning the AI does not have to be very complex.

Of course, an automated solution should be able to deal with obstructions. A robot can for example encounter low hanging/broken off branches of the trees, humans and animals. The system uses proximity sensor to sense its surroundings: if an obstacle presents itself in the robots path, the robot will halt and notify the user. While it waits for the user's response, it will update its status every 5 seconds. If at any point, before user response, the obstacle is no longer present, the robot will notify the user and continue operation. If not, it will wait for the user, who can decide to halt operation until a later point (for example after the user has cleared the obstacle) or can order the robot to ignore the obstacle and continue operation: for example imagine a low hanging branch is obstructing the robot. In this case the user can decide if the robot should simple run into the branch, with the intention that the robot pushes the branch out of the way by running into it. This proximity sensor system will prevent run-ins with obstacles, unless instructed by the user, meaning the system is safe for animals and humans.

Overall, when only looking at the maneuvering of the robot on the field, and the safety of the robot, the system is able to autonomously deal with an entire field. A semi-autonomous system is guaranteed to fully cover the field, and is cheaper than a fully autonomous solution, however it has the additional overhead that a route has to be predefined. A fully autonomous robot has the potential to be more efficient in its route, but is more technically challenging. Since the size of the field, and the cooperation between robots, does not favor any particular solution and the shape of the field inconclusively favors a semi-autonomous system, our recommendation is to utilize a semi-autonomous, single robot system for now, until fully autonomous systems become more mainstream and less expensive.

Next we discuss how a system should behave when it needs to charge, needs to empty its container or has finished working the field. We can distinguish a couple of behaviours in such cases:

  • The robot signals the user and waits for it to be picked up
    • The robot stops where it was at that moment
    • The robot moves to the edge of the field or even a designated point at the edge of the field
  • The robot autonomously moves to a point, where it can charge, empty or wait
    • The point is at the field edge
    • The point is further away
    • The robot autonomously moves to work another field

Before we discuss the pros and cons of the above behaviours, we must point out that the desired behaviour likely depends on the user. Some farms have all its fields close to or adjacent to each other, whereas other farms have their fields scattered around the vicinity. This heavily impacts whether a user is willing to pick up the robots or wants the robots to come to some “waiting place” or continue working another field. Also the wealth of the user determines whether each field has a charging point, or not. Finally the implementation of the charging point impacts the above: is it a fixed-in-place charging point, or more like a powerbank that you place where and when needed? On closed farms, meaning farms where you can move between fields without encountering random people or vehicles anywhere, a more automated approach is viable: The robot could move from a field to a charge, empty or wait point somewhere else on the farm easily by just following a set route. It would then be the user’s responsibility that no objects or people get in the way, which is very manageable. Alternatively, again, a fully autonomous system could be used for the routing and maneuvering to the point. We can present similar pros and cons for a fully autonomous versus a semi-autonomous system again as above, but for this particular use case (closed farm) a semi-autonomous system would do just fine.

Concept gripper

The gripper should grab all kinds of weeds and remove them efficiently. The first concept uses two long parallel rods, which extend under the weed so the stem of the weed will be in between the two rods. When the gripper is at its place, the rod, mounted to a carriage, will be moved towards the stationary rod and the stem will be clamped in between the two rods. Now the weed is hold tightly at a relatively strong point, it can be pulled out of the soil, together with its roots. The gripper can then move to a weed container and dropping the weed in there. Below, a drawing of this gripper is shown, together with a carriage that will move one of the rods. The movement of the carriage is done by a rack and pinion actuator. The drawing is just a concept: manufacturing margins, motors, bearing seatings etc. still have been left out of the picture.

Side view of the gripper
Isometric view of the gripper

Battery

The robot needs to have energy to operate. The easiest way to provide the robot with energy is using a battery. Putting solar cells on the robot will not be enough, because the robot will operate underneath and between trees. The trees are blocking the sun, so the solar panels will not generate that much energy. Another option is providing energy by cables. A very long cable is needed in this situation, because the scope in which the robot works is very big. The cable can also be stuck behind some tree or other obstacle. Stationary cables providing energy (like is used by electric trains) is also not convenient. It is dangerous for human that enter the area, because they can get an electric shock. Also lots of cables are needed and it can be damaged easy. A battery doesn't have those disadvantages, but there is another disadvantage. A battery can run out of energy.

A battery can be recharged, but that takes time. If the battery is in the robot, the robot has to wait till the battery is charged and cannot do the tasks for which it is intended. To solve this problem, there is an existing solution, namely a battery change system. In such a system, the battery can be easily removed from the robot and another battery can be placed. Currently the battery change is mostly done by humans, however the process is not difficult. We found a patent on a battery change system. The battery itself has contacts two opposite sides. At one side the contacts are used for charging and the contacts at the other side are used when the battery is in use. To remove the battery is something like a conveyor belt used. When the battery is removed, then a full battery needs to be placed in front of the battery space in the robot. This can be done with a linear movable battery rack. When the full battery is in front of the gap the conveyor belt is applied again to place the full battery in the robot. To see a picture of this, see [1].

After measuring the battery usage the robot knows how long it can operate before getting the next battery. In the navigation, this can be taken into account. If this is done correctly, the robot will in practice never run out of battery.

Weed container

If you remove the weed and let it fall on the place where it was is not preferable. The removed weed can make that even more weed is growing on that place. If the robot makes the field weed free the next time, then the robot may detect the removed weed as weed that has to be removed. The speed of the robot decreases and the energy consumption increases. The removed weed can also be an obstacle, that the robot has to avoid the next time. Because of this, the robot has to take the weed and bring it to another place. It is not desirable that the robot per piece of weed drives to the place where the weed has to go. To collect the weed, the robot needs a weed container.

If you throw the weed just in a container, then the container will be rapidly full, because most weed has a stiff structure. To solve this problem, a press can be installed in the container that makes the weed more compact. When the press has worked, more weed can be put in the container. The press does not have to work after each weed that is thrown into the container. This will impact the operation speed of the robot. If the top of the weed pile is to a certain level in the container, the press can operate. If the press does not go further than a set position, then the weed container is full and has to be emptied.

Garbage trucks have the same functions as the weed container that we need in our robot. A size of a garbage truck is too large, so we should scale the solution a bit down, to fit it into our robot. For the weed container a scaled down version of a garbage truck can be used.

The robot has to dump the weed also somewhere. This can be realized with an underground container that is only opened when the robot has to dump the weed in there. This is also a safety issue, such that human cannot fall in the gap. It is of course possible to open the container for human. The top of the container does not have to be electric. If it is realized as a sliding cover, then the robot can open and close it with the arm on which the tool to remove weed is.

Communication

Mockup of application for owner

The robot has to communicate with its owner, such that the owner has control over the robot. Furthermore, if the robot works together with other robots, it has to communicate to the other robots too. If collaborating robots do not communicate, they can come in a situation, in which they are waiting on each other.

With multiple robots, it is the most efficient when there is one central control unit for all the robots, a server. The robot communicates, like the other robots, with the server. The owner of the robots communicates to the server too and the server forwards the commands of the user to the right robot.

The contact between the robot and the server is via an internet connection. The robot is connected to the internet via a mobile network, like 4G. The robot has also the possibility to connect to the internet over a WiFi connection. To setup those connections and to do other things in the software of the robot, the robot has also an USB connection, over which the technicians can send commands.

For safety, the robot has one or more physical emergency stop buttons, such that they are reachable without walking around the robot. If an emergency stop is pressed, the power supply of the robot will be switched off immediately.

The owner of the robot can control the robot via a smartphone app. We will give a mock-up for such an app, but we will first give the functionality of the app:

  • Showing battery level
  • Showing fill level of weed container
  • Showing what the camera on the robot sees
  • Warning in case help of a human is needed (for example when the robot is stuck)
  • Showing the progress of the robot in the field
  • Pause and resume the operation of the robot
  • Start the operation of the robot
  • Stop the operation of the robot
  • Support for multiple robots

Starting the operation can be done in multiple fields. The robot determines based on location data in which field it starts the operation. This means that the robot should be in the field where it should start operating.

Cost Analysis

Cost Analysis

The cost analysis consists of estimates of part costs, and assembly costs. The estimates are very rough, and most likely are too low for a real product. The estimates are based on a hand made robot, not an assembly or factory with contracts with suppliers etc. As visible in the table, part costs are approximately €6000. This is an estimate of the very minimal costs, and does not consider licensing fees, delivery costs etc. Neither does this include testing for functionality and quality and most likely, after an initial build, new or additional parts are required. The table also includes assembly and programming. It is hard to estimate a cost for those attributes. For a single robot/prototype, assembly and programming can be done in-house and would contain numerous ad-hoc solutions and inefficiencies. The values in the table represent a such in-house built and programmed robot. In a mass production environment the values would likely increase drastically. In conclusion, if we try to estimate the cost of a one-off in-house robot this would approach €20.000. The cost for recharging and maintaining the robot is undoubtedly less than refueling and maintaining a tractor with gasoline and hence the costs will not be calculated explicitly.

Without going into detail about sell prices, taxes and all other aspects of running a company, and only looking at the estimated amount of €20.000, we can investigate how this compares to the already in place, pesticide solutions. We will analyse multiple scenarios and make recommendations based on those. Assumptions: pesticides cost $100 per acre, pesticides have to be sprayed every month on average, weeding using the robot has to be done every 2 weeks.

  • A user is currently using pesticides to remove weeds from his/her orchard and owns all required machines and infrastructure. The costs for the user we will consider for this case are only the costs of the pesticides needed to remove the weeds.

References

  1. ↑ 1.0 1.1 1.2 1.3 Balch, T., Boone, G., Collins, T., Forbes, H., MacKenzie, D., & Santamar, J. C. (1995). Io, Ganymede, and Callisto a multiagent robot trash-collecting team. AI magazine, 16(2), 39.
  2. ↑ 2.0 2.1 2.2 2.3 Simmons, R. (1995). The 1994 AAAI robot competition and exhibition. AI magazine, 16(2), 19.
  3. ↑ Tagliaferri, F. (1999). U.S. Patent No. 5,943,733. Washington, DC: U.S. Patent and Trademark Office.
  4. ↑ 4.0 4.1 Noonan, T. H., Fisher, J., & Bryant, B. (1993). U.S. Patent No. 5,204,814. Washington, DC: U.S. Patent and Trademark Office.
  5. ↑ 5.0 5.1 5.2 5.3 5.4 Slaughter, D. C., Giles, D. K., & Downey, D. (2008). Autonomous robotic weed control systems: A review. Computers and electronics in agriculture, 61(1), 63-78.
  6. ↑ Klauer, W. E. (1960). U.S. Patent No. 2,941,223. Washington, DC: U.S. Patent and Trademark Office.
  7. ↑ 7.0 7.1 Ulrich, I., Mondada, F., & Nicoud, J. D. (1997). Autonomous vacuum cleaner. Robotics and autonomous systems, 19(3-4), 233-245.
  8. ↑ 8.0 8.1 Hasan, K. M., & Reza, K. J. (2014, May). Path planning algorithm development for autonomous vacuum cleaner robots. In 2014 International Conference on Informatics, Electronics & Vision (ICIEV) (pp. 1-6). IEEE.
  9. ↑ Lund, J. W. (2000). Pavement snow melting. Geo-Heat Center Quarterly Bulletin, 21(2), 12-19.
  10. ↑ 10.0 10.1 Giles, D. K., & Davis, C. (1996). Development of a machine vision system for weed control using precision chemical application.
  11. ↑ Winston, R. J., Al-Rubaei, A. M., Blecken, G. T., Viklander, M., & Hunt, W. F. (2016). Maintenance measures for preservation and recovery of permeable pavement surface infiltration rate–The effects of street sweeping, vacuum cleaning, high pressure washing, and milling. Journal of environmental management, 169, 132-144.
  12. ↑ 12.0 12.1 Matthies, L., Xiong, Y., Hogg, R., Zhu, D., Rankin, A., Kennedy, B., ... & Sukhatme, G. (2002). A portable, autonomous, urban reconnaissance robot. Robotics and Autonomous Systems, 40(2-3), 163-172.
  13. ↑ 13.0 13.1 Yaghoubi, S., Akbarzadeh, N. A., Bazargani, S. S., Bazargani, S. S., Bamizan, M., & Asl, M. I. (2013). Autonomous robots for agricultural tasks and farm assignment and future trends in agro robots. International Journal of Mechanical and Mechatronics Engineering, 13(3), 1-6.
  14. ↑ 14.0 14.1 Stentz, A., Dima, C., Wellington, C., Herman, H., & Stager, D. (2002). A system for semi-autonomous tractor operations. Autonomous Robots, 13(1), 87-104.
  15. ↑ 15.0 15.1 Morales, Y., Carballo, A., Takeuchi, E., Aburadani, A., & Tsubouchi, T. (2009). Autonomous robot navigation in outdoor cluttered pedestrian walkways. Journal of Field Robotics, 26(8), 609-635.
  16. ↑ Pascucci, S., Bassani, C., Palombo, A., Poscolieri, M., & Cavalli, R. (2008). Road asphalt pavements analyzed by airborne thermal remote sensing: Preliminary results of the venice highway. Sensors, 8(2), 1278-1296.
  17. ↑ 17.0 17.1 Labecki, P., Walas, K., & Kasinski, A. (2011). Autonomous stair climbing with multisensor feedback. IFAC Proceedings Volumes, 44(1), 8159-8164.
  18. ↑ Tomás, V. R., Pla-Castells, M., Martínez, J. J., & Martínez, J. (2016). Forecasting adverse weather situations in the road network. IEEE Transactions on Intelligent Transportation Systems, 17(8), 2334-2343.
  19. ↑ 19.0 19.1 Pérez, J., Nashashibi, F., Lefaudeux, B., Resende, P., & Pollard, E. (2013). Autonomous docking based on infrared system for electric vehicle charging in urban areas. Sensors, 13(2), 2645-2663.
  20. ↑ 20.0 20.1 Chang, M. S., Chou, J. H., & Wu, C. M. (2010). Design and implementation of a novel outdoor road-cleaning robot. Advanced Robotics, 24(1-2), 85-101.
  21. ↑ 21.0 21.1 Goddrie, P. D. (1965). Chemische onkruidbestrijding in de fruitteelt (No. 5). [sn].
  22. ↑ 22.0 22.1 Patron, A., Colin, Y., Bertrand, B., Pho, V., & Abhyanker, R. (2015). U.S. Patent Application No. 14/269,081.
  23. ↑ 23.0 23.1 Abhyanker, R. (2016). U.S. Patent No. 9,373,149. Washington, DC: U.S. Patent and Trademark Office.
  24. ↑ 24.0 24.1 Au, K. W., Touchberry, A. B., VanVoorst, B., & Schewe, J. (2013). U.S. Patent No. 8,364,334. Washington, DC: U.S. Patent and Trademark Office.
  25. ↑ 25.0 25.1 25.2 Everett, M. F. (2017). Robot designed for socially acceptable navigation (Doctoral dissertation, Massachusetts Institute of Technology).
  26. ↑ 26.0 26.1 Bhuiyan, M. N. I., Islam, N., & Shohag, M. H. (2017). Autonomous Robot for Garbage Detection and Collection (Doctoral dissertation, East West University).
  27. ↑ 27.0 27.1 Abbasi, M. H., Majidi, B., & Manzuri, M. T. (2018, February). Deep cross altitude visual interpretation for service robotic agents in smart city. In 2018 6th Iranian Joint Congress on Fuzzy and Intelligent Systems (CFIS) (pp. 79-82). IEEE.
  28. ↑ 28.0 28.1 Guillet, A., Lenain, R., Thuilot, B., & Martinet, P. (2014). Adaptable robot formation control: adaptive and predictive formation control of autonomous vehicles. IEEE Robotics & Automation Magazine, 21(1), 28-39.
  29. ↑ 29.0 29.1 Morales, Y., Carballo, A., Takeuchi, E., Aburadani, A., & Tsubouchi, T. (2009). Autonomous robot navigation in outdoor cluttered pedestrian walkways. Journal of Field Robotics, 26(8), 609-635.
  30. ↑ 30.0 30.1 Kümmerle, R., Ruhnke, M., Steder, B., Stachniss, C., & Burgard, W. (2015). Autonomous robot navigation in highly populated pedestrian zones. Journal of Field Robotics, 32(4), 565-589.
  31. ↑ 31.0 31.1 Bauer, A., Klasing, K., Lidoris, G., Mühlbauer, Q., Rohrmüller, F., Sosnowski, S., ... & Buss, M. (2009). The autonomous city explorer: Towards natural human-robot interaction in urban environments. International journal of social robotics, 1(2), 127-140.
  32. ↑ Bonnema, G. M. (2012). System design of a litter collecting robot. Procedia computer science, 8, 479-484.
  33. ↑ Anonymous. (1998). The abcs of an electric snow-removal system. Air Conditioning, Heating & Refrigeration News, 204(18), 8-8.
  34. ↑ 34.0 34.1 Siddiqi, M. H., Ahmad, I., & Sulaiman, S. B. (2009, April). Weed recognition based on erosion and dilation segmentation algorithm. In 2009 International Conference on Education Technology and Computer (pp. 224-228). IEEE.
  35. ↑ 35.0 35.1 Kaarthik, K., & Vivek, C. (2018). Weed Remover In Agricultural Field Through Image Processing. International Journal of Pure and Applied Mathematics (pp. 393-399). Ijpam.
  36. ↑ 36.0 36.1 Hussain, M., Farooq, S., Merfield, C., & Jabran, K. (2018). Mechanical weed control. In Non-Chemical Weed Control (pp. 133-155). Academic Press.
  37. ↑ 37.0 37.1 Melander, B., Lattanzi, B., & Pannacci, E. (2015). Intelligent versus non-intelligent mechanical intra-row weed control in transplanted onion and cabbage. Crop Protection, 72, 1-8.
  38. ↑ 38.0 38.1 Åstrand, B., & Baerveldt, A. J. (2002). An agricultural mobile robot with vision-based perception for mechanical weed control. Autonomous robots, 13(1), 21-35.
  39. ↑ 39.0 39.1 Bakker, T. (2009). An autonomous robot for weed control: design, navigation and control.
  40. ↑ 40.0 40.1 Bawden, O., Kulk, J., Russell, R., McCool, C., English, A., Dayoub, F., ... & Perez, T. (2017). Robot for weed species plant-specific management. Journal of Field Robotics, 34(6), 1179-1199.
  41. ↑ 41.0 41.1 Peruzzi, A., Martelloni, L., Frasconi, C., Fontanelli, M., Pirchio, M., & Raffaelli, M. (2017). Machines for non-chemical intra-row weed control in narrow and wide-row crops: a review.
  42. ↑ 42.0 42.1 42.2 Bakker, T. (2009). An autonomous robot for weed control: design, navigation and control.
  43. ↑ 43.0 43.1 Gobor, Z., Lammers, P. S., & Martinov, M. (2013). Development of a mechatronic intra-row weeding system with rotational hoeing tools: Theoretical approach and simulation. Computers and electronics in agriculture, 98, 166-174.
  44. ↑ 44.0 44.1 Pérez-Ruiz, M., Slaughter, D. C., Gliever, C. J., & Upadhyaya, S. K. (2012). Automatic GPS-based intra-row weed knife control system for transplanted row crops. Computers and Electronics in Agriculture, 80, 41-49.

Websites of sources (changed to APA notation in references)

  1. https://www.aaai.org/ojs/index.php/aimagazine/article/view/1132
  2. https://www.aaai.org/ojs/index.php/aimagazine/article/view/1130
  3. https://patents.google.com/patent/US5943733A/en
  4. https://patents.google.com/patent/US5204814A/en
  5. https://www.sciencedirect.com/science/article/pii/S0168169907001688
  6. https://patents.google.com/patent/US2941223A/en
  7. https://www.sciencedirect.com/science/article/pii/S092188909600053X
  8. https://s3.amazonaws.com/academia.edu.documents/37918498/06850799.pdf?AWSAccessKeyId=AKIAIWOWYYGZ2Y53UL3A&Expires=1549803092&Signature=8GCjA4uM%2FhDytKf1RFWUmk6m0t4%3D&response-content-disposition=inline%3B%20filename%3DPath_Planning_Algorithm_Development_for.pdf
  9. https://www.osti.gov/etdeweb/servlets/purl/895225
  10. https://pdfs.semanticscholar.org/6b2f/19d3bd58c12071129ba6adba16a87c229aaa.pdf
  11. https://ac.els-cdn.com/S0301479715304412/1-s2.0-S0301479715304412-main.pdf?_tid=bd717970-3888-4fd2-8cfd-4f89ef37f34a&acdnat=1549800079_288b461fdbddadb9ecad9edaef4d7786
  12. https://ac.els-cdn.com/S0921889002002415/1-s2.0-S0921889002002415-main.pdf?_tid=b448d981-30f4-41b9-b527-6e13619c967b&acdnat=1549800321_10552114fd41bada89923042bbd7034d
  13. http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.418.3615&rep=rep1&type=pdf
  14. https://www.researchgate.net/profile/Carl_Wellington/publication/239932742_A_System_for_SemiAutonomous_Tractor_Operations/links/559de2af08aec72001828a7e.pdf
  15. https://onlinelibrary-wiley-com.dianus.libr.tue.nl/doi/epdf/10.1002/rob.20301
  16. https://www.mdpi.com/1424-8220/8/2/1278/htm
  17. https://www-sciencedirect-com.dianus.libr.tue.nl/science/article/pii/S1474667016449207
  18. https://ieeexplore-ieee-org.dianus.libr.tue.nl/document/7438821
  19. https://www.mdpi.com/1424-8220/13/2/2645/htm
  20. https://www-tandfonline-com.dianus.libr.tue.nl/doi/abs/10.1163/016918609X12586141083777
  21. http://edepot.wur.nl/398419
  22. https://patents.google.com/patent/US20150202770A1/en
  23. https://patents.google.com/patent/US9373149B2/en
  24. https://patents.google.com/patent/US8364334B2/en
  25. https://dspace.mit.edu/handle/1721.1/111698#files-area
  26. http://dspace.ewubd.edu/handle/123456789/2501
  27. https://ieeexplore.ieee.org/abstract/document/8336636
  28. https://tue.on.worldcat.org/oclc/5872746903
  29. https://tue.on.worldcat.org/oclc/5154827494
  30. https://tue.on.worldcat.org/oclc/5831032581
  31. https://link.springer.com/article/10.1007/s12369-009-0011-9
  32. https://tue.on.worldcat.org/oclc/4934432761
  33. https://tue.on.worldcat.org/oclc/5387876416
  34. https://ieeexplore.ieee.org/abstract/document/5169487
  35. https://acadpubl.eu/jsi/2018-118-7-9/articles/8/55.pdf
  36. https://doi.org/10.1016/B978-0-12-809881-3.00008-5
  37. https://doi.org/10.1016/j.cropro.2015.02.017
  38. https://link.springer.com/article/10.1023/A:1015674004201
  39. https://library.wur.nl/WebQuery/wurpubs/376454
  40. https://doi.org/10.1002/rob.21727
  41. http://dx.doi.org/10.4081/jae.2017.583
  42. http://edepot.wur.nl/1099
  43. https://doi.org/10.1016/j.compag.2013.08.008
  44. https://doi.org/10.1016/j.compag.2011.10.006
Retrieved from "https://dsdwiki.wtb.tue.nl/index.php?title=PRE2018_3_Group5&oldid=69908"