0LAUK0 PRE2016 3 Groep10 Project progress
Week 1:
General tasks
- A design team of six students has to be formed.
- Brainstorm session on subjects for the project.
- The first presentation, mainly focussed on the actual chosen subject, has to be prepared.
The design team
The design team consists of six students of different departments from the University of Technology Eindhoven:
- Bram Grooten (Applied Mathematics)
- Ken Hommen (Industrial Engineering)
- Lennard Buijs (Mechanical Engineering)
- Man-Hing Wong (Electrical Engineering)
- Pieter van Loon (Software Science)
- Steef Reijntjes (Electrical Engineering)
Initial subject
After a small brainstorm session during the first introduction lecture, the design team came up with the idea to design a smart, autonomous beer bottle sorting machine that can be used as an innovative extension on the control systems what are currently in use in supermarkets. Nowadays, employees are still needed to sort the different beer bottles and put them correspondingly in the correct crate. According to current technologies, this task can easily be done by a control system. Our design team want to especially do research on how artificial intelligence could be used to improve current technologies in control systems. As an example of a control system, the team mainly wants to target a beer bottle sorting machine for supermarkets, that can be demonstrated as a model. The system should be able to, according to sensors and an artificial intelligent vision system, take the empty beer bottles from a conveyer, and put them in the right crate. Is artificial intelligence able to optimize and improve this process, by for example recognizing the labels on the bottles? Can this information what is obtained from the external environment be used in current or future technologies?
Week 2:
Evaluation: After our presentation, we found that our subject was not sufficient, since there was no clear problem we were solving. Therefore we had to think of a new subject or find a problem involving the old subject.
Taken: Prepare presentation 2 for Monday 20 February. Brainstorm about new subject. After 3 hours of discussion there was still no consensus about a sufficient subject, therefore we decided that every group member had to do his own research for the next meeting, which would be on Wednesday 15 February.
- Specific tasks for 13 February: Every group member thinks of a subject that he is enthusiastic about and:
- that really is a problem;
- that can be fixed with robotics and AI.
- with which we can show or build a certain solution.
Ideas for subject
Bram
HIV testing Robot
Problem
Many people with HIV in certain region in Africa, who don’t know that they have HIV (or another STD).
Solution
A robot driving around from village to village to perform tests on people. They need to let the robot take some blood or urine, so the robot can do the tests.
The robot has a curtain (or foldable box) with it for privacy while the person is urinating. Then inside the robot the lab for tests is built and it runs the test. It shows a clear result to the person (for example: happy or sad smiley), maybe on a screen.
It might need to educate people first on what STD’s are, how they can go from person to person, and why it’s bad to have them. It might also deliver condoms. This educating might be difficult, because there might not be many people speaking English. So the robot needs to learn the language of the different regions as well. Also, it could use many pictures to try to explain things simply.
If a person has HIV or another disease, the robot remembers the location where he is, and sends it to the nearest doctor. To ask the doctor if he can come over to the house of the person. It might make a picture of the person, or save the fingerprint of the person and also send it to the doctor, so the doctor knows who the patient is. Also, it could show the patient the route to the nearest doctor and explain why he/she needs to go there.
What we can make: a lot of little parts, like for example the explanation video in English. Or the design of the robot. (like where to people sit to pee, where is the lab part, where is the video screen, does it need to look like a human? It needs to comfort people, not scare them off. Of course a robot that takes blood is scary, but we need to make sure this is as little as possible.)
Pieter
Problem
It is really hard to have a correct seating position at your desk and it is also really hard to get the monitor height and/or tilt set up correctly.
Solution
A computer chair or monitor that automatically adjusts the height of the monitor or the seat settings. It measures from your seating position whether you are sitting correctly and adjusts accordingly. The monitor uses a camera to see how your head is angled and adjusts the height and/or tilt to the perfect position.
Sources
https://pdfs.semanticscholar.org/a6ba/1de940b50603b3440365bcda8c82939f74f7.pdf
Steef
Problem
Some people are unable to open a container because they have a disability or they simply do not have the strength.
Solution
A device that adapts its shape to different types of containers which opens these containers for people who are unable to effectively open these containers.
Man-Hing Wong
Adaptive cruise control (ACC) is a system that can be implemented in nowaday's vehicles, as an addition on the current cruise control system. The system is able to keep track of its environment in such a way that it can allow a vehicle to adapt its velocity to the vehicle that is driving in front of him, especially used to prevent traffic congestion and traffic accidents.
Lennard
Problem: Malaria mosquitos
Solution: A robotic version of a bug-eating plant, so a robot that lures a mosquito with a lamp or some scent. Using a motion sensor and maybe a heat-sensor it will 'bite' when the mosquito gets close enough.
Hand in: The actual robot