PRE2020 3 Group1

From Control Systems Technology Group
Jump to navigation Jump to search


Team Members

Name Student number Department
Tristan Deenen 1445782 Computer Science
Jos Garstman 145722 Mechanical Engineering
Oana Radu 1325973 Computer Science
Ruben Stoffijn 1326910 Biomedical Engineering
Daniël van Roozendaal 1467611 Medical Science & Technology

Planning

Problem statement and objectives

Problem statement

Firefighting is a notoriously dangerous and difficult yet important job. Civilians and firefighters still die in fires.

Objectives

  • How can drones be used by firefighters? (what improvements do firefighters need?)
  • Drone companion
    • Autonomous or controlled. Ideally following teams of firefighters around
    • Helps firefighters
    • Has different functionalities
  • Find out whether using firefighter drones provides a significant advantage for firefighters (also see if there are disadvantages)

USE analysis

User

Naturally firefighters will be the main users for this project. The goal of the drone is to aid firefighters in their job, by scouting the area of the incident, giving live (IR) camerafeed from otherwise unreachable positions. If possible, the drones could also follow firefighters into burning buildings to assist the firefighters. Hence, these drones make the work of firefighters more productive and safer.

Civilians (involved) in fire accidents are the second users. Of course, if firefighters are more capable of doing their job, then these civilians have a higher chance of survival or have less damage to their house, for example.

Society

There are multiple stakeholders involved in this project. Governmental organisations, such as the EU and the national government, are the biggest stakeholder, since they control drone regulations. Furthermore, anyone who is using air space is also a stakeholder, as the drones may disturb the air space. In addition, architects may also be a stakeholder, because in the future it might be neccesary to design buildings differently to accommodate to new fire safety regulations.

Enterprise

Of course, businesses are also an important stakeholder. At this moment, there are already drone companies that produce specific drones, which fire brigades are already using. Moreover, in the Netherlands a new fire department has been set up, specifically for firefighter drones. These collabarations show that there certainly is a worthy market for companies to start developing new technologies and designs in relatively new area.

Drone Functionalities

This will change after we talk with the fire department, but for now we thought of some functionalities the drone could have:

  • remember the path taken/ find the optimal path
  • follow a firefighter/ scout the area
  • communicate with the people outside (live camera feed)
  • should not obstruct the firefighter
  • have a way to improve visibility inside with the smoke (maybe lights or even sounds for people to see them)
  • sensors (infrared, proximity, chemicals, temperature, room scan)
  • multiple drones with specific tasks
  • Carry supplies for firefighters

Sensors

We looked into some sensors the drone could have. The conclusion is that sensors can function in an ambient that has temperature max 250 degrees Celsius. Those sensors are very expensive and have a very small range.

Proximity sensors:

  • Balluff:
    • Temperatures up to 230 degrees Celsius
    • 3 versions of the sensor with range of 50mm
  • E2EH:
    • Temperature up to 120 degrees Celsius (heat resistance verified to 1000 hours)
    • Range max 12mm
  • ASI high temperature inductive proximity sensors:
    • Different sizes, biggest one has diameter 50mm
    • The range for that one is 30mm
    • Temperature up to 230 degrees Celsius
  • Locon photoelectric high temperature:
    • On the site it says temperature up to 250 degrees Celsius, but in the specifications it says only 60 degrees Celsius
    • M30 has sensing distance of 2000mm
  • M80:
    • Temperature 230 degrees Celsius
    • Range 50mm


Infrared sensors:

  • Pyrometer optris CSmicro LT LTH:
    • Temperature resistance up to 180 degrees Celsius
    • Starting from 195 euro
  • Pyrometers optris CS LT
    • Temperature resistance up to 80 degrees Celsiu
    • Starting from 95 euro
  • Pyrometer optris CThot LT for high ambient temperatures
    • Temperature resistance 250 degrees Celsius
    • Starting from 590 euro

Flying in fires

WORK IN PROGRESS

Some research was done into how well drones could fly in fire hazards. unfortunately, little was found on the subject. By looking at helicopters in wildfire situations we know it is possible for copters to fly above excessive heat sources, however, it is unknown how this scales with drones in building fires. Next to the flying ability in fire, the resistance to fire is also important. The drone must be able to withstand high temperatures without losing any functionality. The same holds for flying through smoke, which can botch the electronics inside.

Hotter air is less dense than cold air. It is harder to create lift in thinner air and will result in more battery usage. This will result in additional difficulties.


Important notes to take into consideration for the drone design from firefighter radio tests in high-temp fires:


Thermal Class 1: A maximum temperature of 100℃ (212℉). The test lasted 25 minutes and the radio did not work after the test. Following a cool down time, the radio started to transmit and receive.

Thermal Class 2: A maximum temperature of 160℃ (320℉). The test lasted 15 minutes but after only 8.5 minutes the radios went dead or suffered significant performance problems from transmission and reception shutdown to signal degradation or fluctuation and did not recover after a cool down period.

Thermal Class 3: A maximum temperature of 260℃ (500℉). In this class portable radios inside pockets of firefighter turnout gear were tested. The radios protected in pockets survived but exposed cords, speakers and microphones did not, effectively limiting the radios to Thermal Class 2 electronics.


“Firefighters sometimes find themselves fighting blazes in temperatures as high as 500 degrees F (260 degrees C).” This means 260℃ is supposedly the maximum temperature firefighters have to withstand.

https://www.nist.gov/news-events/news/2006/09/firefighter-radios-may-fail-during-high-temp-fires#:~:text=The%20NIST%20fire%20engineers%20tested,of%20212%20degrees%20F%20



Heat resistance

A study by W.C. Myeong and K.Y. Jung on the development of a fire-proof drone[citation needed](add reference, do not understand how this works yet) suggest the use of an aramid fiber as fire resistant material in combination with an air buffer layer for further insulation. The aramid fibre, also known as BPO, has exceptional fire resistant qualities. The fiber is heat resistant till temperatures up to 550 oC.[citation needed] At temperatures above 500 oC the material starts to lose weight ver slowly. This is hardly relevant for us since the temperatures the fibre will have to endure will be 260 oC at maximum. PBO would however need several layers to protect the electronics inside the drone. Due to the limited weight the drone can carry the use of an air buffer is suggested by the previous mentioned paper. This air buffer is used to circulate cool air through the system and protect the electrical components.

The electrical components inside are not the only parts that have to be heat resistant. The propellers also have to be flame retardant and heat resistant. Rotor blades are the parts that are frequently damaged and are therefore often made from thermoplastics to reduce the cost. However, the main property of a thermoplast is that they soften when heated, a property we definitely do not want. Another material often used is carbon fiber or carbon fiber-reinforced composites. These materials are relatively more expensive, but also come with better mechanical properties such as tensile strength and heat resistance.

Interview with the fire department

The interview is scheduled to be on March 2nd. We will update this part after the interview


Questions for fire department:

-Could you explain what exactly your role is in the fire department and what you do most days at work?

-What do you feel is the biggest problem faced in fire fighting nowadays? What could have the biggest impact on the speed with which fire can be controlled and extinguished?

-What roles do you think drones could possibly take over?

-Do you believe that drones could be used to actually douse fires?

-What is your experience with drones with fire fighting and what is your view on the usage of drones?

-If specialized drones could be at a fire site faster than a firetruck, what would be the most useful thing a drone could do as preparation for the arrival of the fire department?

-Have you considered any alternative technologies than drones? What are your conclusions regarding these alternatives?

-When do you think (firefighting) drones will be commonly used by firefighters?

-Do you think a companion drone would be useful (a drone that follows firefighters around and has a few tasks to improve safety and help firefighters with their jobs)? If yes, what feature should it have? What would be the most helpful for you?

-Have the rules for the fire department changed with respect to drones, since the recent european regulations? (31 december 2020)

-Are drones possible in the fire department practically? Is there a budget for it and is it possible to have enough people on this?

European drone regulations

Since December 31 2020, the Netherlands follow European drone regulations. These new regulations divide drones in 3 separate categories: Open/zero, specific and certified. Normal consumer or hobby drones usually fall in the open category. These drones have a few restrictions:

  • Maximum weight: 25 kg (at takeoff)
  • Maximum height: 120 meters
  • No transporting hazardous material
  • No dropping materials
  • Always have visual line of sight

There are subclasses for the first category, depending on the weight of the drone. Most relevant is subcategory A3 which concerns drones from 2kg – 25kg. With normal regulations this category cannot fly 150 meters near any living, trade, industry or recreational zones.

The next category, specific concerns flights that:

  • May be near people
  • May fly near airports
  • May have a weight above 25kg
  • May fly in inhabited environment
  • May fly above a height of 120 meters
  • May drop materials
  • May fly beyond visual line of sight (BVLOS)

Drones deployed by the Dutch fire brigade fall under the specific category. Obtaining authorization for flight needs to be done at the national aviation authority. On the national website of the Dutch fire brigade (https://www.brandweer.nl/ons-werk/drones-bij-de-brandweer/meer-over-drones/brandweer-nederland-krijgt-eigen-luchtvaartorganisatie) It is stated that they are getting their own flight organization, perhaps regulations are more lenient or authorization is more quickly granted this way. (((LOOK INTO THIS)))

Dutch fire brigade has unique exemption from specific drone laws: https://www.brandweer.nl/media/9028/stcrt-2018-33332.pdf

https://www.rijksoverheid.nl/onderwerpen/drone/nieuwe-regels-drones

https://www.easa.europa.eu/domains/civil-drones-rpas/specific-category-civil-drones

https://www.rijksoverheid.nl/binaries/rijksoverheid/documenten/kamerstukken/2018/05/28/voortgangsbrief-drones/voortgangsbrief-drones.pdf

Drone state-of-the-art

A company named DJI Enterprise currently produces drones that firefighters in the USA use. Namely, the Mavic 2 enterprise advanced is used. These drones mainly help with urban fires, wildfires, and HazMat Operations. For urban fires, they help by:

  • Fly over buildings and obstacles, and see through smoke with thermal cameras to help prioritize targets
  • Stream live video intelligence back to command centers to align teams and eliminate uncertainty
  • Leverage high-resolution cameras to remotely monitor remaining threats and document damage for future analysis

https://www.dji.com/nl/mavic-2-enterprise-advanced

Another company named Parrot produces a drone named ANAFI Thermal. This professional drone also offers a high quality thermal camera that could potentially be used by firefighters. Details about the drone's features: https://www.parrot.com/assets/s3fs-public/2020-07/bd_anafi_thermal_product-sheet_02_a4_2019_04_10-1.pdf

Both of these drones are pretty similar, and are also used in similar ways. Because of their great mobility, these drones offer live feeds via great vantage points. Furthermore, they can instantly swap from a normal camera to a thermal camera, offering vital information that would otherwise be hard to detect. Drones are not really used for going inside though. For now, they are just Mostly equipped with lots of cameras and other sensors to quickly collect as much data as possible. One bottleneck is that operators of the drones need an ample supply of batteries. Also, these drones function to a temparture up to around 40 degrees Celsius, which is not enough for buildings on firem

Papers

Evaluation of a sensor system for detecting humans trapped under rubble: a pilot study

In this paper, a sensor system for human rescue including three different types of sensors, a CO2 sensor, a thermal camera, and a microphone, is proposed. The performance of this system in detecting living victims under the rubble has been tested in a high-fidelity simulated disaster area.

CO2 sensor is useful to effectively reduce the possible concerned area.

The thermal camera can confirm the correct position of the victim.

The use of microphones in connection with other sensors would be of great benefit for the detection of casualties.

An algorithm to recognize voices or suspected human noise under rubble has also been developed and tested.

Currently, rescue teams use life detection systems mainly based on microphones, optical/thermal cameras, and Doppler radar.

Audio signal analysis is an effective method to detect humans trapped under rubble, and some systems are already commercially available, such as the Acoustic Life Detector, which is based on audio signal processing to identify victims’ low-frequency sounds.

Microphones become less accurate in the case of high background noise such as pneumatic drills, breakers, vehicles, wind, power cables, and water flows that can be present in a real scenario.

Another limitation of audio detection systems is that they cannot locate unconscious victims.

Even though cameras are an efficient method to detect casualties, their effectiveness is limited by their inherent reduced angle of view, the presence of obstacles, and the generally limited visibility under the rubble.

Doppler radar has been widely used in disaster rescue operations due to its efficiency in detecting motion behind obstacles.

Frequency or phase shift in a reflected radar signal can be used to detect motions of only a few millimeters such as heartbeat or breathing.

Doppler radar requires accurate calibration and even small environmental changes due to aftershocks and structural instability have a negative impact on the performance of this kind of system.

In extremely noisy environments the detection of feeble sounds will not be possible.

The correct voice recognition rate is 89.36% in a noisy environment. The correct classification rate for human-related suspect noise, including scratching and coughing, is 93.85%. Therefore, using a microphone in connection with other sensors would be beneficial for the detection of casualties.

Conclusion

  • A CO2 sensor can provide useful information to locate a casualty, but an O2 sensor does not
  • A voice recognition algorithm based on SVM was also tested and from the results obtained it was confirmed that using the microphone would be of great benefit in the detection of casualties.
  • The gas sensor is difficult to use in open spaces due to stronger airflow affecting the CO2 concentration
  • A sensor system using only a thermal camera is not robust because some areas cannot be directly accessed using a telescopic pole or directly observed due to the presence of obstacles.

Use of Fire-Extinguishing Balls for a Conceptual System of Drone-Assisted Wildfire Fighting

This paper gives the suggestion of using extinguishing balls for fighting wildfires. The paper concludes that these balls cannot be used by drones for fighting building fires however. They also give an elaborate design for releasing the balls and drone specifications

https://www.brandweer.nl/ons-werk/drones-bij-de-brandweer

Current state of drones in the fire departments in the Netherlands. Mostly used for their camera’s and heat sensors. The fire department now has its own flight department, which makes the regulations for the fire department less strict.

Top 3 Tactical Changes from Firefighter Research

Basic firefighting tactics involve limiting airflow through the fire site. Ventilation was believed to help reduce smoke and heat but turned out to have dangerous effects. A lot of airflow can lead to more oxygen fed into the fire and an increase in the amount of smoke inside. Controlling the airflow before the fire can either decrease or increase the dangers and is very difficult to do and should only be done when the effects are proven to work. The three critical steps described here are confining the airflow to the fire, cooling the fire department and clearing the remaining smoke and heat.

With this knowledge, drones could be specialized to detect where airflow is caused from a different point of view from human level. Heat sensors can see where the heat is escaping a building the most, this place is causing the airflow.

Top 20 Tactical Considerations from Firefighter Research

“No amount of technology is going to replace the need for you to know your profession”. Drones should never try to act as a replacement. Drone designers need input from specialists in the field of firefighting.

This source is probably from a safety presentation. Most information is not on these slides but the basic rules are described. Here they talk more about ventilation with which drones could help in the previous mentioned way. Also, safe positions for firefighters is explained. Drones could help the firefighters to better see where they are safe or not with e.g. a top view or other perspectives.

Cancer Is the Biggest Killer of America's Firefighters

The danger that kills most firefighters these days is cancer. Not an obvious main cause but the amount of asbestos in the past and other chemicals found in buildings these days is the real danger.

Drones obviously can’t prevent these long term safety issues for the firefighters but they can help in some way. Drones could be used before firefighters went inside a building to measure the toxicity of the air. With this knowledge, the tactics of the firefighters could be changed before entering. The drones would be a safer option to go inside quickly, maybe even before the firefighters have put on their gear and arrived to the site of the fire with the firetruck.

Tristan's Father firefightering experience

  • Has had the full training and certifications.
  • Has had one actual building fire experience, though he was working in the building when the fire started, so he only helped with evacuating people in the initial phase.
  • Doesn’t think that drones specifically made for firefighting are good.
  • Rather, drones that scan areas for gas, temperatures, size etc. and that carry supplies such as oxygen are better.
  • Explained the duo team setup when going into buildings:
    • One leader, one follower that makes sure there is always a way out.
    • Possibly multiple teams in one building.
    • Main goal: find other people and animals and bring them to safety.
    • Once in a while, stamp really loud followed by shouting “Is someone here?”.
    • This has the following benefits:
      • People might hear and might say something back.
      • You know if the floor is sturdy enough.
      • By the echo you might be able to deduce some other properties of the room.
    • Leave everything exactly as it was when passing through the building. Essential for your and other team’s backtracking.
    • In his time, there was only 20 minutes of oxygen available (probably now there is more). After 10 minutes, the mask makes an annoying sound that becomes louder while your oxygen supply is getting lower.
  • Other duo’s focus on using fire hoses, obtaining more water, securing the area etc..
  • Also told story where a very experienced firefighter failed a training and he would have died were it not a training. The man was so psychologically struck that he immediately quit being a firefighter forever.

Drone Swarms in Forest Firefighting: A Local Development CaseStudy of Multi-Level Human-Swarm Interaction

Paper is about drones deployed by firefighters for forest fires. The writers have created a workshop for firefighters where they are given a map with a forest fire somewhere. Then the firefighters have to describe how they would combat the fires with the help of drones.

1 More drones require more mental workload. Eventually the user cannot cope with the system anymore. A promising approach is to control the group as a whole, independent of the group size. Benefits are that the swarm is scalable and decentralized organization makes it robust when individual drones fail as the swarm adapts to find a new way to achieve its goal. Lastly, it is cost-effective because its simplicity enables (comparatively) cheap individual components to perform the same functional task as a single complex, expensive drone.

1.1 Drones are effectively used as scouts to find and provide information about fires.

1.2 Information about why there is not a lot of research on these kinds of topics and what type of research this paper is about. No real substantial information here.

2 Describes how workshops were set up where firefighters (some had more than1 year of firefighting drone experience) would utilize their drones to combat a forest fire in a rural area. This was done by giving the participants a map of the area and cubes that represented the items such as drones, firetrucks or whatever the participants needed. Notes were taken based on the participant’s scenario descriptions and how they interacted with the drones.

3.1 If drones are allowed on site, they firstly scout the whole area to measure the fire, look for terrain features such as water sources, natural barriers, buildings and roads. Then the firefighters make an estimate on how the fire will spread. After that, the drone keeps an overhead view of the site, such that possibly another commander can overview the operation. Firefighters can also use the drone as a (moving) guide through the flames. Other than that, drones also scan the surrounding area for additional fires. Drones generally only update their overview every 10-15 minutes to conserve energy.

3.2 The envisioned use of drones to detect wildfires describes two scenarios: First, when an emergency call is made, a very fast drone is immediately sent to the fire to get an overview of the situation and gather important data. Second, one could use a swarm survey to survey high-risk areas. The swarm would fan out to form a straight line, several kilometers in length, and systematically sweep the selected area for fires, using both visual spectrum and IR sensors. Whenever a drone identifies a potential fire it brings in additional drones to verify the sighting, with the rest of the swarm reorganizing to close the gaps left by the drones that have now stayed behind. When ground units arrive, tasks described in 3.1 are executed for the drones.

Furthermore, large helicopter-like drones could be used to carry lots of water to douse the fire themselves. These drones could also be equipped with loudspeakers to instruct people to evacuate.

3.3 Best to read the whole section

Analysis and design of human-robot swarm interaction in firefighting

The paper discusses possible forms of interactions with swarm robotics being examined in the GUARDIANS[1] project. The paper addresses the use of assistive swarm robotics to support firefighters with navigation and search operations. It reports on existing firefighters operations and how human swarm interactions are to be used during such operations.

1 The paper focuses on employing the swarm as an aid to firefighters once they engage with the fire incident. There are two types of users involved in this situation. First, users remotely overseeing and managing operations in real-time. These users provide decision making support to the operations commanders. Second, users that are directly in the field and fully equipped.

The work reported in this paper assumes that the robots are capable of extracting required information from the environment, as well as be able to navigate. More information about the robots that were used can be found at the end of section 1.

2A. The emergency setting environment for the project is a large single story industrial warehouse. Being blinded by smokes and fumes is one of the largest risks firefighters have. Furthermore, in an area such as this, there are tons of unknown variables, such as a simultaneous ignition of all the combustible material in the area or a sudden release of toxic gases.

2B Describes the procedure that firefighters use when fighting a fire. Procedure is basically the same as described in procedure my father told me.

3A During intervention-oriented missions, such as those of rescue teams and armed SWAT-teams, a considerable amount of communication is devoted to clarifying positional information like confirming the position of specific agents. Moreover, firefighters operate in conditions, such as poor visibility, noisy environment and a thick clothing gear, which restrict their senses, and thus their communication abilities. Also, wireless communication may easily be disturbed due to metallic structures inside the incident area.

3B Firefighters are already experiencing enough stress as it is with their tasks. Making an unclear interface would only add up to the workload firefighters experience. ‘Alternative’ means are currently being investigated.

3C Firefighters only have a short time window to make their decisions on site. As a consequence, it is imperative that acquired information and data allow firefighters and human operators at the base station to comprehend in real time the on-going situation, and accordingly to best perform decision making.


3D In designing interfaces, it is important to take into consideration the roles assigned to humans and robots. For humans, different roles have different expectations or models of the robots. If these differ from reality, this will lead to frustration, additional stress, and possibly serious or critical mistakes.

3E Although simulations may be helpful, operational robot swarms will be required to assess the adequacy and efficiency of the interfaces developed.

4 The authors used prototypes to assess what firefighters think and how they interact with their ideas.

4A The auhtors expect that firefighters will have two roles during operation: team mates or bystander. Team mates will actively cooperate with the robot swarm in achieving the goal, such as scouting the incident area or searching for victims. By-standers do not have direct control over the robot swarm.

4B The GUARDIANS base station shall provide classical robot station features such as mission authoring tools, mission execution monitoring and control means, interface to robots and human crew members, and mission data recording. This will allow for the following roles:

Base station coordinator: responsible for preparing and validating mission plans, coordinating the activities of operators, robots, human crew members and sensor data specialists, taking decisions in the scope of the GUARDIANS appliance activities and is an interface from and toward the commanding chain above the GUARDIANS appliance.

Operators: They have the means and clearance to teleoperate robots, groups of robots and humans crew members. Sensor data specialists: they observe and analyse sensor data and accordingly provide advice and reports to the appliance coordinator. Stakeholder in the commanding chain: They take general purpose decisions regarding the GUARDIANS appliance activities, that the base station coordinator shall apply accordingly.

4C Through consultation and interviews the following activities have been proposed as ways in a robot swarm may assist firefighters. Notifying the firefighters of possible hazards (e.g. obstacles, high temperature, chemicals); Indicating unambiguously the direction to the scene of incident or backwards to the exit point; Grouping - it is important for firefighters that the swarm stays within a relatively close range to them but also maintains its distance to the firefighters to allow them freedom of action

5A Passive: Robots adapt to the movement of the firefighters. Drones have special gear that allows them to see the surrounding area despite the poor visibility firefighters have. They should also be able to specifically see the firefighters, perhaps they can be equipped with electronic sensors.

Tangible: In general the same as passive, however firefighters may now give specific tasks for the robot swarm. In order to do this, a minimalistic interface will have to be developed that will not bother the firefighters in any other way.

Movement-Based: A movement language could enable an easy means of communication with the swarm while being diverse enough to cater to most needs.

5B Tactile: A tactile interface consisting of eight tactors will be attached to the firefighters torso. The interface displays a “tactile picture” of possible hazards locations surrounding firefighters. Both parameters of the frequency and amplitude will be used to communicate the seriousness of hazards.

Visual: The swarm communicates unambiguous directions through a novel visual device (can be seen in paper) to be installed within the firefighters’ helmet. The visual device displays the directions in a simple form which requires minimum attention from firefighters in order to understand them.

5C Another option would be remote interaction via a base station. The crew that control the swarm from the base station then have a real time overall situational awareness, such that other firefighters can be more efficient. Further, the base station could give clear instruction to the men on site. Exact details on how this would be built can be found in the paper. Two types of configurations are considered.

Remote human - robot swarm interaction: The principle of a robot swarm is to rely on auto-organization and group behavior emergence to fulfill tasks, while benefiting from redundancy. Visualization of the swarm activity in the base station is an essential issue: efficiently encompassing the overall robots activities in a single view is a major aim for the GUARDIANS’ base station. During normal operations, robots operate autonomously. However there are situations in which autonomy level adjustment is deemed necessary. For example, when the challange is too complex for a robot or requires more knowledge than the swarm has. This makes the swarm more flexible and creates a nice balance of the workload among humans and robots.

Remote human - human crew members interaction: This allows the base station to also telecommunicate with firefighters. The main benefit is the possibility to coordinate robots and humans activities on the fields together, in a comparable way. Sometimes firefighters face conditions where visibility is null and ambient noise makes it impossible to discuss with other crew members. In such a situation, the base station can send simple step by step elementary actions requests through the designed user interface, for instance to guide the firefighter toward the exit.


[1]: GUARDIANS (Group of Unmaned Assistant Robots Deployed In Aggressive Navigation by Scent) is an European project developing and applying the concept of autonomous robots in urban search and rescue operations. Specifically the project is focused upon assisting humans involved in searchand-rescue emergencies and also employing robot mounted sensors to provide a heightened level of feedback in such settings.

How Firefighters Can Better Manage Emergency Situations Using Drones

Talks about what drones are currently used for in firefighting and some challenges. From a company that creates software for use of firefighting drones. Drones are mainly used for surveillance and search and rescue.

A Survey on Robotic Technologies for Forest Firefighting: Applying Drone Swarms to Improve Firefighters’ Efficiency and Safety

Very recent paper on forest firefighting in Spain. Survey of firefighters asking on current problems in their line of work. Main need is information. Aerial view and Thermal cameras. Also proposes drone swarm concept for surveillance, mapping, monitoring etc.

Use of drones for firefighting operations

Danish Master Thesis on Firefighting drones. 89 pages, haven’t read the whole thing. Nice summary of benefits and limitations below.

SummaryMasterThesis.png

Fire Department Drones Serve a Variety of Needs on Incident Scenes

Shorter article on firefighting drones talking about some experiences of fire departments. Again these drones are primarily used for information, not actually fire fighting.

An Exploratory Study of the Use of Drones for Assisting Firefighters During Emergency Situations

Exploratory study on drones assisting firefighters in emergency situations Surveys firefighters and 911 callers Also looks at privacy and safety suggests multiple solutions, mainly communication, but also indoor usage

autonomous navigation in complex environments

2 studies on autonomous navigation in complex environments. I think way too difficult to do for us but it is a source to show it is possible

Victim detection

Study on victim detection with UAV’s, the second one is more about finding bodies under ash, maybe not too interesting for us. Unless we also want to look into search after a fire.

AI simulations and programming environments for drones: an overview

Simulations:

  • Main reason: enable AI to learn how to perform tasks without the need of any human intervention
  • Objective: study the behavior of the drone-based application, provide training
  • Help in economizing the cost of the actual implementation of the system
  • Very important for drones to be simulated and evaluated before formally being put into use
  • Drones simulated with AI can track the fire outbreak by locating the areas affected and suppress the fire. (the drones have infrared cameras and other hardware)

Reasons drones are simulated:

  • Evaluate new technology
  • Low-cost training
  • Research and development

Vision and control: optical sensing or cameras

Trajectory planning: velocity, coordinates, location, flight path

Automatic navigation system: increases its speed to over 90 miles per hour; reduces the risk of poor navigation performance

Communication system: drones transmit data such as speed, direction, fixed points; communicate with other drones

AI issues in drones’ simulations:

  • High cost
  • Human error: drones can make mistakes especially if trained with the wrong data
  • Security and privacy
  • Adaptability: impossible for drones to adapt to changes in environments
  • Required expertise: need for programming and AI skills which are limited

Performance assessment parameters:

  • Coverage radius: drones have a precise coverage radius determined by its altitude, enables the base to receive and send signals
  • Drones’ throughput: drones are expected to froward data to stationary base stations
  • Scalability: depends on drone architecture
  • Battery lifetime: batteries have restricted capacity; researchers are trying to find a way to manage the power consumption

Open research issues:

  • Behavior and control
  • Computer vision: challenging because the nature of drone structure
  • Security and viability: issues in the GUI applications, affects the operation of the drone network
  • Communication: choosing the right for drone communication (network topology, architectural design, routing)
  • Vague simulation environments: difficult to obtain required results especially when several different simulation environments are used (difficult to compare the AI algorithms used for simulation and the accuracy of their performance)

Machine learning for cyber security frameworks: a review

Machine learning:

  • Most common applications: image recognition and natural language processing
  • Appears to be a useful tool in providing security online
  • The purpose of research on ML applications for cyber security: employ the cognitive capabilities of ML to automate intrusion detection and forensic analysis of security breaches

Machine learning tasks:

  • Regression: deductions based on precondition
  • Classification: separating data unit or items into categories based on some attribute of the data
  • Clustering: grouping of data units or items
  • Association rule learning: making a conclusion based on an analysis of a previous event
  • Generative models: simulating data based on previous decisions

Cyber security tasks:

  • Intrusion detection: detect and notify concerned agents about an intrusion
  • Malware analysis: use a decompiler and debugger to decrypt the data stored by the malware and understand how it works
  • Spam detection: involves the techniques used to identify spam emails

Machine learning approaches for cyber security:

  • Regression: fraud detection (probability of fraudulent actions can be deduced by a linear regression model)
  • Classification: used in spam filters (natural language processing can also be applied)
  • Clustering: malware protection to separate valid user files from malicious files
  • Association rule learning: associate specific responses to different incidents in a system
  • Generative models: offensive cyber security (used to generate possible input parameters to test vulnerabilities in intrusion tests)

Effectiveness of machine learning in cyber security:

  • Important to analyze the effectiveness of these ML applications in comparison to already existing traditional methods employed in cyber security
  • Most existing cyber security protocols that use ML only apply ML to specific aspects of their frameworks
  • The idea of a fully autonomous cyber security framework still requires more research and experiments

What to take in consideration when decided whether to apply ML approaches or not:

  • What ML algorithm is best suited for the application
  • If the framework is aimed at general or specific threats
  • The frameworks vulnerability to adversarial attacks
  • The need for continuous and regular retraining the ML model

Conclusion:

  • ML oriented cyber security frameworks – still require a lot of continuous and fresh research
  • ML cyberattacks – have also automated cyberattacks as well => more difficult to handle
  • More useful research must take into consideration the shortcoming of ML approaches to cyber security

a survey study on mac and routing protocols to facilitate energy efficient and effective UAV-based communication

Routing protocols for UAVs:

  • Requires location awareness, energy awareness, increased robustness to fragile links and dynamically changing network topology
  • Development of the routing strategies and protocols for UAV network: one of the most challenging tasks for UAV-based communication systems
  • A lot of research is being currently conducted on UAV routing
  • Existing routing protocols for wireless networks have been modified to suit UAV applications
  • Classified based on the routing strategies in 2 categories: single-hop and multihop routing protocols

Single-hop routing:

  • Main purpose of a routing protocol: transmit/forward the data gathered while increasing the delivery ration and minimizing delays and resource consumption
  • Routing protocols: should consider scalability, loop freedom and efficient use of resources such as energy, memory and computation time
  • One way to use UAV as communication systems: as packet bearers (transfers the relevant information when flying from the source to the destination)
  • This approach can mainly be employed for occasion with fixed topology

Multihop routing:

  • Another popular strategy employed to address the challenges for UAV-based communication systems
  • Classified into topology based and position based routing protocols
  • Topology based routing is divided into proactive, reactive, hierarchical and hybrid routing
  • Position based routing: in UAV, depending on the application, it is usually ideal to consider he network in three dimensions
  • Hierarchical routing: in UAV based communications used for coverage extension, relaying and data distribution and collection, using UAVs similar to traditional wireless sensor network infrastructures is also becoming quite popular
  • Hybrid routing: a few clustering based hybrid routing algorithms are proposed in the literature for UAVs

Data delivery models in UAVs:

  • Very difficult to analyze each and every application in UAVs from data delivery perspective
  • The traffic characteristics are very specific and distinct to the applications
  • The network’s performance: very critical while focusing on UAV applications
  • UAV applications (especially event-driven in nature ones): mission critical, real time and interactive
  • Query-driven UAV-based applications: also mission critical, real time and interactive
  • To save energy: queries can be sent on demand

MAC protocols for UAVs:

  • Self-organization, high-degree of coordination, management among the sensors: required to support the variety of application areas and make use of UAVs as effectively as possible
  • Energy preservation: one of the most important factors in the design of a MAC layer protocol
  • The choice of MAC: highly impacts the performance of the UAVs
  • No MAC protocol ha been standardized for UAVs among a variety of protocols available in literature
  • While designing a MAC protocol, the following attributes need to be considered:
    • Throughput: the requirements of UAVs in terms of delivery efficiency are very specific to the task
    • Scalability of the Network
    • Latency: most UAV applications are critical where data needs to be sent in real time, latency needs to be kept to possible minimum
    • Energy efficiency

Conclusion:

  • There is a need for newer protocols for applications which use UAVs
  • Protocols to be developed:
    • required to adapt to highly mobility, dynamic topology, intermittent links, power constraints and changing link quality
    • should be able to support features such as energy efficiency, high connectivity, delay sensitiveness, high reliability and security

Heat Resistance and Flammability of High Performance Fibres: A Review

Paper about the heat and flame resistant properties of BPO, a fiber used in firefighting clothing

Development of FAROS (fire-proof drone) using an aramid fiber armor and air buffer layer

Concept of a firefighting drone using aramid fiber and air buffer to protect against heat and flame.

Who did what?

Week 1
Name (Student number) Time spent Tasks
Tristan Deenen (1445782) 6:15h Meetings (1:30h + 1:15h + 1h), Brain storming (1h), reserach (1:30h);
Jos Garstman(145722) 5:45h Meetings (1:30h + 1:15h + 1h), Brain storming (1h), research (1h);
Oana Radu (1325973) 6:15h Meetings (1:30h + 1:15h + 1h), Brain storming (1h), research (1h), wiki entry (0:30h)
Ruben Stoffijn (1326910) 6:45h Meetings (1:30h + 1:15h + 1h), Brain storming (2h), research (1h) ;
Daniël van Roozendaal (1467611) 5:45h Meetings (1:30h + 1:15h + 1h), Brain storming (0:30h), research (1:30h);


Week 2
Name (Student number) Time spent Tasks
Tristan Deenen (1445782) 10:00h Meetings (1h + 1h + 0:30h), Talking to firefighter and summarizing that (1:45h), Reading (2:45h), Research (2:15h), Edit wiki (0:45h)
Jos Garstman(145722) Meetings (1h + 1h + 0:30h), Reading and finding sources (2h)
Oana Radu (1325973) 7:30h Meetings (1h + 1h + 0:30h), Reading(2:30h), Research (2h), Edit Wiki (0:30h)
Ruben Stoffijn (1326910) Meetings (1h + 1h + 0:30h), Reading/Research (2h), Letter (1h)
Daniël van Roozendaal (1467611) 6h Meetings (1h + 1h + 0:30h), contacting firefighters for interview (1:30h), reading articles (2h)


Week 3
Name (Student number) Time spent Tasks
Tristan Deenen (1445782) Meetings(0:30h + 0:30h), Research(1:45h), Edit wiki(00:30h), Add USE to wiki(00:45)
Jos Garstman(145722) Meetings(0:30h + 0:30h), Research(4h), Edit wiki(00:30h)
Oana Radu (1325973) 5h Meetings(0:30h + 0:30h), Research(4h)
Ruben Stoffijn (1326910) 5:30h Meetings(0:30h + 0:30h) Research (4:30h)
Daniël van Roozendaal (1467611) Meetings(0:30h + 0:30h)


Week 4
Name (Student number) Time spent Tasks
Tristan Deenen (1445782) Meetings(1h)
Jos Garstman(145722) Meetings(1h), Editing wiki(1h)
Oana Radu (1325973) Meetings(1h), Research(3h)
Ruben Stoffijn (1326910) Meetings(1h)
Daniël van Roozendaal (1467611) Meetings(1h)


Week 5
Name (Student number) Time spent Tasks
Tristan Deenen (1445782)
Jos Garstman(145722)
Oana Radu (1325973)
Ruben Stoffijn (1326910)
Daniël van Roozendaal (1467611)


Week 6
Name (Student number) Time spent Tasks
Tristan Deenen (1445782)
Jos Garstman(145722)
Oana Radu (1325973)
Ruben Stoffijn (1326910)
Daniël van Roozendaal (1467611)


Week 7
Name (Student number) Time spent Tasks
Tristan Deenen (1445782)
Jos Garstman(145722)
Oana Radu (1325973)
Ruben Stoffijn (1326910)
Daniël van Roozendaal (1467611)


Week 8
Name (Student number) Time spent Tasks
Tristan Deenen (1445782)
Jos Garstman(145722)
Oana Radu (1325973)
Ruben Stoffijn (1326910)
Daniël van Roozendaal (1467611)

References

Reference example.[1]

[1]

  1. 1.0 1.1 Miskelly, F. (2001). Assistive technology in elderly care. Age and Ageing, (30), 455–458. Retrieved from https://watermark.silverchair.com/300455.pdf.