Embedded Motion Control 2014 Group 4

Members of group 4

Khy, R.N.	Norent
Kiriouchine, V.I.	Seva
Kuijk, F.J.M. van	Fransis
Marx, S.	Sanne
Smit, J.	Jorrit

Media

Find videos of the Pico emc04 tests on our Youtube channel.

Planning

Week 1:
-Introduction Lecture
-Determine course goals

Week 2:
-Install Ubuntu, ROS, fix SVN etc.: get everything up and running
-Finish all tutorials: C++, ROS
-Think of first concepts to tackle the corridor problem
-Implement first concepts: wallfinder, angle/distance controller

Week 3:
-Improve angle/distance controller
-Try to implement holonomic concept
-Meet tutor to discuss problems and project progress
-Perform Pico Test

Week 4:
-[Sanne] Place current functions in seperate .cpp files to allow for parallel updating
-[Sanne]Change the sendVelocity function into a twoPointNavigator function which aims to place pico between two lazer scan ranges+angles given as function input.
-[Fransis]Create a corridorFinder function which identifies the two corners of all corridors large enough for pico to pass through. Discard distant corridors and output two lazer scan ranges+angles of the closest found corridor.
-[Seva]Create a function which decides what points are sent to the twoPointNavigator function based on how close pico is to the side corridor found by corridorFinder , allowing pico to seamlessly switch between navigating the straight corridor and turning into the side corridor.
-[Norent]Change the safety radius into a safety box around pico using the dimensions of pico, create an unStuck function which allows pico to safely move away from any obstacle breaching the safety box.
-Implement a finishedCorridor condition which can detect that pico has left the corridor exit and stops all movement.
-[Pico EMC04]Win the corridor competition.

Concepts

wallFinder
Pico should be able to recognize walls. This can be done by using the Laser Range Finder. The data received from the Laser Range Finder must be filtered to get useful data that can be used by our controller.
From this sensor we receive an array with distances, 270 degrees around Pico. This array is split in half to represent vision on the left and right side. In these two arrays we search for the smallest distance that is greater than 0.15 m (a part of the vision is blocked by Pico him/her/it-self). Finally the angle at wich these distances are with repsect to Pico are calculated. This function thus finds two distances and two corresponding angles.

Angle/Distance controller
When Pico navigates through the corridor the distances found by the wallFinder are controlled to be equal. Besides the distances, the angles at which these distances are detected should be controlled to be zero. When the closest distances left and right of pico are equal and the angles zero, Pico is oriented in the middle of the corridor oriented in the longitudinal direction, which is exactly what we want.

Holonomic movement
At the tutor meeting it became clear that Pico is equipped with omni-wheels which means holonomic movement is possible. Currently the Pico in the simulator has differential wheels. With omni-wheels the distance can be controlled independent of the angle.

Cornering
We should think of how Pico can recognize and take corners.

findExit
We should think of how Pico can recognize the exit of the corridor so that it stops moving.

safetyHitbox
TODO hitbox dimenions (front x side): 2.0e-1 x 1.5e-1.

unstuckSafety
TODO

Implemented concepts

wallFinder
Angle/Distance controller

Log

Week 2:
Monday 28-04-2014: Group meeting SEL/SOL
Present: Sanne, Seva, Norent, Fransis

• Installed all software on laptops
  
• Got the svn up and running
  
• Started with tutorials and discussed problems
  

Wednesday 30-04-2014: Meeting SEL/SOL
Present: Sanne, Fransis

• Finished tutorials
  

Friday 02-05-2014: Meeting OGO 2
Present: Sanne, Seva, Norent, Fransis

• Created concepts: wallFinder, angle/distance controller, exitFinder, Cornering
  
• Implemented the following concepts: wallFinder, angle/distance controller:
  
• Pico now can detect walls and navigate through the corridor, not controlled optimal yet

Week 3:
Wednesday 07-05-2014: Group meeting OGO 18
Present: Sanne, Seva, Norent, Fransis

• Held first tutor meeting with Sjoerd
  
• Created holonomic concept
  
• Prepared for real world Pico test
  

Thursday 08-05-2014: First experiment with Pico
Present: Sanne, Seva, Norent, Fransis

• Preparation for the experiment by reviewing the tutorials and our work
  
• Tested code on Pico
  
• Saved logfiles
  
• Observed Pico's behaviour as expected:
  
  • Safety precautions work
    
  • Speed limits work
    
  • Robust for gaps in wall
    
  • Robust for small corridors (width: 8e-1 [m])
    
  • Robust for non-straight corridors
    
  • Unable to make the turn for the corridor contest
    
• Measured Pico rectangular hitbox:
  
  • front: 1.5e-1 [m]
    
  • side: 2.0e-1 [m]
    
  • Made videos of experiments (uploaded soon™)

Time Table

Overview of time spent per group member

	Lectures	Group meetings	Mastering ROS and C++	Preparing midterm assignment	Preparing final assignment	Wiki progress report	Other activities
Week_1_Norent	2
Week_1_Seva	2		6
Week_1_Fransis
Week_1_Sanne	2		2
Week_1_Jorrit
Week_2_Norent	2		6
Week_2_Seva	2	6	2
Week_2_Fransis	2	4	6
Week_2_Sanne	2	6	4			0.5
Week_2_Jorrit
Week_3_Norent		1	3	3			1
Week_3_Seva
Week_3_Fransis		8
Week_3_Sanne		12
Week_3_Jorrit
Week_4_Norent
Week_4_Seva
Week_4_Fransis		8
Week_4_Sanne
Week_4_Jorrit
Week_5_Norent
Week_5_Seva
Week_5_Fransis
Week_5_Sanne
Week_5_Jorrit
Week_6_Norent
Week_6_Seva
Week_6_Fransis
Week_6_Sanne
Week_6_Jorrit
Week_7_Norent
Week_7_Seva
Week_7_Fransis
Week_7_Sanne
Week_7_Jorrit
Week_8_Norent
Week_8_Seva
Week_8_Fransis
Week_8_Sanne
Week_8_Jorrit
Week_9_Norent
Week_9_Seva
Week_9_Fransis
Week_9_Sanne
Week_9_Jorrit
Week_10_Norent
Week_10_Seva
Week_10_Fransis
Week_10_Sanne
Week_10_Jorrit