Embedded Motion Control 2014 Group 12: Difference between revisions
No edit summary |
|||
Line 58: | Line 58: | ||
<br>Output: cmd_vel | <br>Output: cmd_vel | ||
<br>Syntax:</p> | <br>Syntax:</p> | ||
==Revisions== | |||
*13-05 Testing corridor_challenge on Pico. | |||
Updated the corridor_challange.cpp to corridor_challange_v2.cpp. | |||
Brought the function sit-eval withing the callback loop for sensor messages. This way, the situation is evaluated and updated whenever new laser data is present. Some minor typo's. Added a situation that when things are to close (hard constraint) pico shuts down. After testing it was revealed that pico is stuck in condition 0 (does not know where he is). |
Revision as of 13:04, 14 May 2014
Members of group 12
Anthom van Rijn | 0737682 |
Jan Donkers | 0724801 |
Jeroen Willems | 0755833 |
Karel Drenth | 0863408 |
Testing
- 09-05 Initial testing to familiarize with the operation of Pico.
- 13-05 Testing corridor_challenge on Pico.
Software architecture corridor challenge
Initially, six functions are to be written to perform specific tasks to complete the corridor challenge.
Function: const_hard
Description: Stop Pico from running into a wall by readjusting if any point in the laser data is under a threshold.
Input: laser data
Output: cmd_vel
Syntax:
Function: readlaser
Description: Reduce the set of laser data to a managable set of variables by only taking the the data from the front, sides and back (from the frame of reference attached to Pico).
Input: laser data
Output: laserfront, laserright, laserback, laserleft
Syntax:
Function: sit_eval
Description: Use the laser data to determine the situation the robot is currently in, corridor (1), T junction left (2) or T junction right (3).
Input: laserfront, laserright, laserback, laserleft
Output: sit_number
Syntax:
Function: corridor
Description: sit_number = 1, attempts to stay in the middle of the corridor and continue straight on.
Input: laserright, laserleft
Output: cmd_vel
Syntax:
Function: t_junction_left
Description: sit_number = 2, drives a set distance forward, turns left and again drives a set distance forward.
Input:
Output: cmd_vel
Syntax:
Function: t_junction_right
Description: sit_number = 3, drives a set distance forward, turns right and again drives a set distance forward.
Input:
Output: cmd_vel
Syntax:
Revisions
- 13-05 Testing corridor_challenge on Pico.
Updated the corridor_challange.cpp to corridor_challange_v2.cpp. Brought the function sit-eval withing the callback loop for sensor messages. This way, the situation is evaluated and updated whenever new laser data is present. Some minor typo's. Added a situation that when things are to close (hard constraint) pico shuts down. After testing it was revealed that pico is stuck in condition 0 (does not know where he is).