PRE2019 3 Group3

Introduction

Group information

Information about the groupmembers and the logbooks each week can be found here.

Problem statement

One of the most important aspects of a space colony would be self-sustainability. Supplying a colony through space would be too expensive and resource heavy to sustain. This is why, in order to keep the colony up and running and be able to expand the colony it needs a way to collect materials and minerals. For this purpose we would like to research the possibilities for an autonomous mining robot that will search, collect and transport these materials and minerals for the colony. It needs to be able to navigate and move through the unknown lands of another planet, locate and mine the necessary materials and transport these back to the colony. For each task we need to research different possibilities and look for the best solution available.

Tutor meeting notes:

Needs to be more specific

Users

The users of these autonomous mining robots will be the space colony. This colony will entrust these robots with gathering materials for their building and renovation needs.

The secondary users are the engineers that may have to repair mining robots.

Tutor meeting notes:

- Colony

- Engineers

- Manufacturers (NASA/ESA)

Objectives

The autonomous robot needs certain capabilities in order to function. These capabilities can be divided in:

- Navigation and movement

- Locating and mining materials

- Transporting materials

It also needs to have power in order to do these things.

In order to create such an autonomous mining robot all these capabilities need to be researched and should conclude in a solid solution to carry out these functions. Different possibilities for each capability should be analyzed and compared in order to gain the best inside.

Milestones

Week 1: Decided on a subject for the project.

Week 2: Created a plan and each group member has done the necessary research on his chosen objective.

Week 3: Implement findings of research into wiki.

Carnaval:

Week 4: Potential Experiment chosen.

Week 5: Potential Experiment done.

Week 6:

Week 7: Finish research, design and wiki.

Week 8: Finish presentation.

Deliverables

- Research on autonomous mining robots.

- Suggestions for a (best) solution for each objective.

- Presentation.

Who will do what?

First each group members will decide on an objective to focus on for the project.

- Finn:

- Nick:

- Rik:

- Stefan:

- Zeph:

Then each group members has to read and summarize 5 relevant papers of their chosen objective.

Then each group member shall report their general findings on the wiki.

Then the group has to decide on an experiment and execute that experiment.

Then everyone implements the findings into the wiki and finalizes their chosen subject.

Finally, everyone works on the presentation.

Planning

Week 1: Decided on a subject for the project.

Week 2: Work on plan and finish research.

Week 3: Implement findings of research into wiki.

Carnaval

Week 4: Potentially Choose experiment and execute experiment.

Week 5: Potentially Implement findings of experiment.

Week 6: Work on wiki.

Week 7: Work on wiki.

Week 8: Finish presentation.

State of the art

General

[1] NASA plans to use multiple mining robots together in order to supply a colony with materials. These robots should work together in a "swarm". They will work individual first, but when one robot finds something interesting it will call the other robots in order to help it with extraction.

[2] Competition for students to build mining robots. Maybe a good place for inspiration.

[3] Maybe interesting. Not looked at yet.

[4] NASA page including all kinds of information sources about space colonies.

[5] Space Settlements: A Design Study. Includes information about all aspects of a space settlement including resources needed to maintain and expand.

[6] What do we need to know to mine an asteroid? States that science is nearly able to develop a space mining technology, only further knowledge of asteroid contents is needed.

Navigation and movement

[7] This paper is focused on underground mining. Uses four-wheel vehicles that minimizes curvature variation in the path it takes and stays in a certain safety margin from the mine walls. It presents a study that uses a B-spline for path determination. A B-spline (or basis spline) is a spline function. This means that the function can be reconstructed by connecting different polynomials. All possible spline functions can be reconstructed by connecting different B-spline functions.

[8] The focus of this paper lies on aerial robots in an underground mine. These aerial drones use both visual and thermal cameras to ensure a good understanding of the surroundings in order to map in these dark, dust-filled areas.

[9] This paper describes a framework for terrain characterization and indentification. This framework is composed of vision-based classification of upcoming terrain, terrain parameter identification via wheel-terrain interaction analysis and acoustic wheel-terrain contact signatures based terrain classification.

[10] This paper provides a new solution to the simultaneous localization and mapping problem with six degrees of freedom. he additional three degrees of freedom are yaw, pitch and roll angles. A robot on a natural surface has to cope with all of these degrees of freedom. With this solution an autonomous mobile robot can create a 3D map of a scene such as a mine or a cave.

Locating and mining materials

[11] While not about robots, this paper presents the method of using a detailed world model of the geological structure of the ground in order to locate different ores in the ground. It uses different sensors across the mining area, which could be placed on a robot which moves around, in combination with a supervised learning algorithm to build this world model. ~Might be interesting. No access to full paper yet however.

[12] This paper describes methods to build the spectral library to map geology on minefaces. The library includes multiple environmental conditions such as the inclusion of shade and moisture. Such a spectral library can be used by autonomous mining robots to identify different materials.

[13] In this paper an automated technique that allows a robot to classify the shape and other geological characterics of material from a 2D photographic images and stereographic data. This technique first seperates the material from the background after which various metrics are used to classify the materials sphericity, roundness, and other geometric properties.

[14] In this paper a new automated geological perception system is presented. It detects and classifies geological structures by using hyperspectral imaging sensors and a learning algorithm. Ultimately the system builds a rich model of the operating environment which can be used in autonomous mining.

[15] This paper gives information about an economically favourable mining technique called Optical mining. This method of mining will provide affordable mission consumables and radiation shielding.

[16] Asteroid Mining. Explores possibilities for space mining on asteroids. This paper comes to the conclusion that a solar powered mining vehicle, that runs on water and that mines water and platinum group metals, would be potentially feasible in the near future.

[17] Asteroid Mining. States how far we are on developing space mining technology. This might happen within a decade, once a cost-effective method is found. Also addresses financial, environmental and legal issues.

Transporting materials

[18] June 26, 1951 R. w. GAUSMANN APPARATUS FOR TRANSPORTING MATERIALS 5 Sheets-Sheet 1. Is about a technique for for transporting materials without changing the compounds temperature which may be necessary to prevent chemical changes in the material being transported, or to prevent it from solidifying within the car whereupon it would have to be heated to be removed therefrom.

[19] Describes a bag with means for vacuuming an internal space of the bag. This can extend the lifetime of organic matter.

[20] Extraterrestrial construction materials by M.Z.Naser. This review explores the suitability of construction materials derived from lunar and Martian regolith along with concrete derivatives, space-native metals and composites, as well as advanced and non-traditional materials for interplanetary construction.

[21] Space-native construction materials for earth-independent and sustainable infrastructure. This review covers feasibility of exploiting in-situ lunar and Martian resources as well as harvesting of elements and compounds, from near Earth objects (NEOs), to produce extraterrestrial materials suitable for construction of space-based infrastructure.

[22] Materials and design concepts for space-resilient structures. This paper presents a state-of-the-art literature review on recent developments of “space-native” construction materials, and highlights evolutionary design concepts for “space-resilient” structures.

Society

[23] Societal challenges in sustainable space mining. This article focuses on sustainable space mining and the issues it brings up. Potential issues are: 1) Legal issues 2) Issues in investment 3) International disputes 4) Environmental protection.

[24] Space Law in Asteroid Mining. In order to ensure legitimate space mining, countries need to update their own legislation and cooperate internationally in this area.