PRE2017 4 Groep8

Group members

• Isabelle Cooijmans | 1014516 | i.h.m.cooijmans@student.tue.nl
• Ramon Hameleers | 0998964 | r.j.e.hameleers@student.tue.nl
• Angelique Husson | 0956648 | a.c.e.husson@student.tue.nl
• Marrit Jen Hong Li | 0963568 | m.i.jen.hong.li@student.tue.nl
• Dana de Vreede | 1020836 | d.d.vreede@student.tue.nl

Previous idea

Our Previous Idea can be found on this page.

Introduction

Problem statement

Elderly suffering from dementia often have problems managing their daily activities and independent living can become difficult. Decline in memory forms a big problem and an interactive reminder system could help these people to create a daily routine based around a certain event.

Objective

Our goal is to help elderly in the early stages of dementia. They will be helped in the form of an interactive system primarily focussed on letting the patient water its plants at specific times. Firstly, by creating this repeated event, elderly will create a stronger daily rountine. Such a routine provides consistency and a predictable time slot, in which to return to valued occupations . Secondly our objective is to research whether the shape of such a system contributes to the functionality of it.

Thus the main objective can be split in two sub objectives:

• A system that creates a routine for the patient.
• Investigating the impact of shape on functionality.

These sub objectives will be explained in more detail further in this wiki page.

Users

The users of the technology formulate certain requirements or wishes for the functioning of the technology. The users are a diverse group and therefore they will be split up into three kind of users: primary, secondary and tertiary users. The primary users are the users that come directly into contact with the technology and directly benefit from it. Secondary users will use the technology infrequently or not directly. Tertiary users are the users who are affected by the technology or make decisions about its purchase.

The primary users are:

• Elderly in the beginning stages of dementia

The secondary users are:

• The care takers
• The family, friends and loved ones
• The government

The tertiary users are:

• The technicians

Requirements

The three different types of users described in the previous section all have requirements. These requirements are listed below. Requirements of primary users:

• The elderly with a decline in memory need a system that will help them remember specific tasks
• The elderly need to feel less lonely and kept busy

The specific tasks that the elderly can be remembered of are tasks such as:

• A reminder to water the plants
• A reminder to take in medicine
• A reminder to have a meal

Requirements of the secondary users:

• The secondary users need their elderly to feel secure and less lonely
• The secondary users need their elderly to be helped to remember basic tasks

Requirements of the tertiary users:

• The tertiary users need a system that is easy to install and easy to maintain.
• The tertiary users need a system that gives a notification in case of an error or when it needs maintenance.

Approach, milestones and deliverables

Having something to care for, keeps people busy and makes life more enjoyable. For example having a plant and hence the responsibility to take care of that plant can serve as occupational therapy and ease the mind. Taking care of a plant could have a positive impact on someone’s life, especially when they feel lonely. Imagine that this plant is no ordinary plant but a robot plant, that can speak or give signals to the owner. This plant can give forgetful elderly people something they can nurture, but can also give the owner reminders of basic tasks. This robotic plant could for example remind the owner that the plant needs water to stimulate the nurturing aspect and compliment the owner when he or she does a great job caring for the plant. The plant can also give the owner a reminder at a specific time of the day in which the plant asks if the owner has already taken their medicine or to ask if the owner has already eaten. The owner can than respond by pressing a button. In return the plant can then again complement the owner or stimulate the owner to do their daily activity. The plant is meant as a playful device from which the elderly will benefit and which they will also enjoy.

Our goal is to deliver a prototype of a robotic plant that will be tested with the involvement of the users and is capable of the following actions:

• The robotic plant notifies the user that the plant needs care
• The robotic plant gives positive signals when it is properly nurtured, or stimulates the user to nurture when it is not cared for
• The robotic plant can remind the owner of small specific tasks
• The robotic plant is able to interact with the owner

Other deliverables are:

• A presentation which will be given in the last week of this quartile. In this presentation we will present our prototype of the robotic plant, discuss our findings and show our progress.
• A finished wiki page which will include all our findings and progress made during this project. This will be extensively discussed.

Other milestones and deliverables can be seen in the planning.

Before this idea can be implemented, it is important to investigate the state of the art.

Literature Study

In order to obtain more insight about the topic a literature study about the state of the art will be conducted. ...

General literature study about dementia therapy

This article talks about that talking about plants could have a positive effect on elderly with dementia. It also talks about other kinds of therapy.

Robots that help elderly with cognitive problems

Paro

Apathy, agitation, loneliness and depression are common behavioral and psychological symptoms of dementia. These symptoms can make life distressing for the person with dementia and can also make it challenging for care staff to meet the needs of the person. In recent years, social robots have been used as a means to reduce this. Both animalistic robots, such as Paro, or robotic toys make the patients enjoy their time more and thus improve their well-being. Such an effect can also be created using plants or other systems the elder has to take care of.

Robots who take care of plants

The Pet Plant: Developing an inanimate emotionally interactive tool for the Elderly

The effect of pets on the health of elderly is widely known and this effect can also be summoned by robot pets. Another alternative is to use

Low cost colour sensors for monitoring plant growth

A relatively new area of research is that of non-destructive methods to measure the health status of plants. Such as looking at subtle changes in the colour of the leaves. This paper mainly focuses on low cost colour sensor for monitoring leaf colour of plant tissues.

To implement this system a autonomous robotic arm containing RGB colour, environmental and proximity sensors are used, as well as a camera. The robotic arm uses five stepper motors controlled through a motor controller and a micro-step driver. Their system was either compatible with the ColorPAI or the TCS 3200 colour sensor and both were controlled with a Basic Stamp microcontroller. The ColorPai uses a RGB LED light source and records the quantity of light reflected back from the object to determine the color. The TCS3200 illuminates the object with two white LEDs and interprets the colour of the object by producing a square wave with a frequency proportional to the light reflected by the object. A completely different way of determing plant leaf colour is by using an image captured by the camera and determining through software the colour of each pixel. This may however lead to false colour. For example when shadows from overlapping leaves are misinterpreted as colours of the leaves itself.

They only tested the TCS3200 and calibrated it across a broad range of green and yellow colours. In the end it had an average error around the 4% when determining an RGB color in the range of green and yellow colours.

Effect of gardens on the mood of the elderly heart

A research done on the impact of different garden design on the mood and functioning of an elderly's heart. Organised and structured gardens benefit the health of the elderly. This means that a structured placement of plants throughout a house or elderly home will also improve the health of the patient.

Garden greenery and the health of older people in residential care facilities

In this article the relation between greenery gardens in elderly homes and the self perceived health of the patients is examined. This was done by a vast amount of questionnaires for the residents of many elderly homes. Also elderly were asked to report on their personal health and garden visits. Both tests showed a positive and strong relation between patient well-being and the accessibility of a garden. Visiting such a garden gives a sense of being away and even wondering about them gives a positive impact on the patients health. This information shows the importance of accessible greenery in elderly homes

Plant growth monitoring system, with dynamic user-interface

The paper develops a prototype for an efficient plant growth monitoring system. It provides data about the environmental parameters surrounding the plant and maps the changes in plant growth to the inputs given by person caring for the plants, such as the quantity of water or fertilizers. It can also measure the plants height.

The system consists of a Raspberry Pi which analysis the output of multiple sensors and sends this data via Bluetooth to someone's phone. They also developed an user-friendly app which displays all this data. The system does not take care of the plants itself, it only monitors a variety of environmental parameters

Robotics in protected cultivation

Right now there is a lot of research to increase automation in protected cultivation. Production of high value plants is facing an increase in problems such as increased costs for employees and decrease in skills. Robotics can help decrease these problems. The problems can be sorted into different groups. For seeding, grafting and cutting there are already products which can do this just as there are for transporting, sorting, packaging and cleaning. However there is still a lot to win in the department of weeding, thinning, leaf picking, protection and harvesting. The technical challenges in robotics are the fact that technologies have to deal with complex environments. There are two solutions which can be used in this case, advancing technology or modifying the environment.

Thermostats and measurements of oxygen(state of the house)

NeoFox Oxygen:

This oxygen sensor shows oxygen sensing using two methods. First of all, by making an electrochemical compound that will conduct current based on oxygen levels in the material. This is a relatively easy method and gives linear dependency between the oxygen level and the current created, but will also consume the oxygen. Secondly, by using a fluorescent material that will react to oxygen, different sorts of light will be radiated. Based on the frequency, amplitude and phase of this emission, the amount of oxygen can be determined. This second method may be faster and more reliable, but also more difficult to produce.

PhO2: Smartphone-based Blood Oxygen Level Measurement Systems using Near-IR and RED Wave-guided Light

Measuring a patient's blood oxygen level plays a critical role in healthcare practices. In the paper, they develop a phone-based oxygen level estimation system which uses the camera and flashlight functions of a smartphone. Since the camera and the flashlight of a smartphone aren't made for this purpose, they encountered many challenges in using them for this purpose.

Blood oxygen level is often indicated by oxygen saturation measurement (SpO2). Accurately measuring SpO2 with a high frequency is critical in monitoring the well being of key organs and also to provide warning signs of abnormalities. One of the most common ways to measure SpO2 is by using a pulse oximetry system. This system comprises dedicated hardware and software. It works by project light beams at specific wavelengths deep into the users' finger, toe, earlobe, or other location. This light hits dedicated photoelectrodes and the intensity of the light received carries information that can be used to determine the users' SpO2. This way of measuring SpO2 is very reliable but it requires the user to purchase one and to carry it with them during the day. Patients often forget to take the device with them or forget to charge it. Also, different patients have very different finger and earlobe sizes and the devices are thus not always a good fit.

There are already many applications for smartphone out there that use the flashlight and camera to determine various blood properties. However, none have the ability to accurately estimate SpO2. This low accuracy is a result of the fundamental challenges when one tries to repurpose the camera and flashlight for SpO2 measurements. Examples of these challenges are:

• One needs an IR wavelength
• One needs to work around the varying movement, pressure, contacting area of the users' finger

In the paper, they develop a hardware add-on (PhO2) designed to be snapped on the phone as a phone case which has optical filters of different wavelengths. The add-on helps stabilize the users' finger. Due to the limitations of the phone's hardware, the reflected light captured by the PhO2 is further processed by dedicated algorithms.

Smart device for gas range

This is a smart device, which knows when the gas is on and whether the stove is left unattended. In case of an unattended stove, the device will send a message to the user, which can shut off the gas supply or call for relevant party's immediate attention remotely. When sending the message fails or when there is no response, the device will automatically shut off the gas supply.

Iot-Based Intelligent Modeling of Smart Home Environment for Fire Prevention and Safety

Firedection has become an issue since it caused severe damage including the loss of human lives. To reduce property damage and save lives, early detection of a fire event is very effective. The installation of a fire alarm system is the most convenient way to detect a fire early and avoid losses.

In the paper, they propose an efficient, IoT-based intelligent home fire prevention system using multiple sensors, which each uses its own mechanism for detection.

In the paper, problems and challenges related to the current approaches are identified, GSM communication is used to alert the user at early stages, star topology is used for the deployment of sensors and communication between sensors and main home sink and the system concerning energy consumption is evaluated.

Design and Development of a Low-Cost, Portable Monitoring Device for Indoor Environment Quality

In this article, the design and development of a low-cost, portable monitoring system for indoor environment quality(IEQ) is described. A prototype is made with commercially available low-cost sensors and a do-it-yourself approach is provided. The designed system monitors temperature, humidity, PM2.5, PM10, TVOC(x3), CO2, CO, IAQ, illuminance, and sound levels. The biggest advantage of this design is the low cost, since it provides a comprehensive, portable, and real-time monitoring solution, for less than 200 dollars.

A cheap and third-age-friendly home device for monitoring indoor air quality

This article proposes a new methodology to analyze indoor air quality with a cheap and third-age-dedicated device. The researchers developed a prototype, which they called HOPES, Home Pollution Embedded System. This prototype gives simple and understandable information, also comprehensible for people with cognitive problems or that are not familiar with new technologies. The prototype gathers data about pollutants and displays the different air pollutants concentrations to the user. These air pollutants concentrations are from toxics gasses up to explosives. Furthermore, in the paper an overall air quality index is elaborated and displayed by HOPES with lights and numerical information. HOPES is an internet of things device. Hopes works in real time and can be connected to a geographic information system platform and the web to add spatial information about each pollutant. The results highlighted how it is possible to get useful air quality information with a cheap device.

Medication reminders

Smart Home medication reminder system

Many elderly people need assistance from nurses, housekeeping, and visitors that remind them to take their pills. New technologies can provide a medication reminder system. This article mainly focuses on the Open Home Automation Bus (openHAB). This is a software that integrates and thus combines different home technologies together. There are several smart technologies that help elderly people and this software can combine them and make it easy to use.

A WSN smart medication system

It is very important that patients or elderly people take in their medicine correctly. However for elderly it often becomes difficult to remember whether or not they have already taken their medicine. Also when these people have lots of different pills it can become hard to remember which to take and when to take them. A wireless sensing network (WSN) system have been invented which can remind patients to take their medicine. The system consists of a master panel (MP) and portable smart pill-boxes (SPB). Magnetic sensors are used to detect whether or not there are pills in the (SPB). If not pill has been taken. This paper describes the three-state pill sensing mechanism and all other aspects of the wireless sensing network.

Medicine Reminder and Monitoring System for Secure Health Using IOT

Elderly people sometimes tend to forget doing basic things among daily routine. This can lead to them forgetting to take their medicine at the right time of forgetting it entirely. Using the Internet of Things (IoT) network low cost medical sensing can be produced. There have been multiple test with technologies to find a way to decrease this problem. A monitoring system and sensor can send information using a wireless module. The information can be shared using IoT, however since health information can be very personal an encryption or decryption purpose is recommended.

MESSAGE INA BOTTLE

Medication reminders in the form of pill bottles are already available. The bottle can notify patients when they need to take their medication or missed a dose as well as seeing that the pills are almost out and notifying a pharmacy. This technology can not only increase the effectiveness of certain drugs but also reduce the readmission rates at hospitals. The pill bottle uses a sensor to detect opening and closing of the lit and compare its content. This is then send to the startups server which can analyze the data. Using different colors of light the user is given an indication of when taking medication is necessary.