Embedded Motion Control 2019 Group 5

Welcome to the Wiki Page for Group 5 in the Embedded Motion Control Course (4SC020) 2019!

Group Members

Name	TU/e Number
Winston Mendonca	1369237
Muliang Du	1279874
Yi Qin	1328441
Shubham Ghatge	1316982
Robert Rompelberg	0905720
Mayukh Samanta	1327720

Introduction

The star of 4SC020: Pico

The world around us is changing rapidly. New technological possibilities trigger new ways of life and innovations like self driving cars, medical robots, are prime examples of how technology can not only make life easier but also safer. In this course we look at the development embedded software of autonomous robots, with a focus on semantically modelling real world perception into the robot's functionality to make it robust to environmental variations that are common in real world applications.

In this year's edition of the Embedded Motion Control course, we are required to use Pico, a mobile telepresence robot with a fixed range of sensors and actuators, to complete two challenges: the Escape Room Challenge and the Hospital Challenge. Our aim was to develop a software structure that gives Pico basic functionality in a manner that could be easily adapted to both these challenges. The following sections in this page detail out the structure and ideas we used in the development of Pico's software, the strategies designed to tackle the given tasks, and our results from both challenges.

Pico

To aptly mirror the structure and operation of a robot deployed in a real-life environment this course uses the Pico robot, a telepresence robot from Aldebaran Robotics. With a fixed hardware platform to work on, all focus can be turned to the software development for the robot. Pico has the following hardware components:

• Sensors/Inputs:

1. Proximity measurement with Laser Range Finder (LRF)
2. Motion measurement with Wheel encoders (Odometer)
3. Control Effort Sensor
4. 170-degree wide-angle camera (not used in this course)

• Actuators/Outputs:

1. Holonomic Base - Omni wheels that facilitate 2D translation and rotation
2. 5" LCD SCreen
3. Audio Speaker

• Computer:

1. Intel i7 Processor
2. OS: Ubuntu 16.04

Functional Requirements for Pico

A description of the expected functionality of robot is the first step to defining its implementation in software in a structured manner. With the given hardware on Pico we were able to define the following functionality for Pico to be able to sufficiently operate in any environment it is placed in:

Generic Requirements

1. Pico should be capable of Interpreting (giving real-world meaning) to raw data acquired from its sensors.
2. Pico should be capable of Mapping its environment and Localising itself within the mapped environment.
3. Pico should be capable of Planning motion trajectories around its environment.
4. Pico must adhere to performance and environmental Constraints, such as maximum velocities, maximum idle time while operating, restricted regions, avoiding obstacles, etc.
5. Pico should be capable of Providing Information about its operating state and internal process whenever required through the available interfaces.

In addition to these, the following task-specific requirements were defined for Pico (descriptions of the challenges can be found in later sections):

Escape Room Challenge Requirements

1. Pico should be capable of identifying an exit and leaving the room from any initial position.
2. Pico should use the quickest strategy to exit the room.
3. Pico must drive all the way through the exit corridor till the end (past the finish line) to complete the challenge.

Hospital Challenge Requirements

1. Pico must be able to accept a dynamic set of objectives (cabinets to visit).
2. When Pico visits a cabinet, it should give a clear sound of which cabinet it is visiting (i.e.,“I have visited the cabinet zero”).
3. PICO has to make a snapshot of the map once a cabinet is reached.
4. PICO should be capable of identifying and working around obstacles and closed doorways while planning its trajectory.

Software Architecture

With the knowledge of the available hardware and the operational requirements for the given tasks, software development can take a well structured and modular developmental approach, thus making it feasible to alter designs and add new functionality at later stages of development. Our software architecture can be split into two parts: the World Model which represents the information system of the robot and the Software Functions which covers all the block that use data from the World Model to give Pico its functionality. While in theory it is encouraged to have a definition of the Information Architecture of system before heading into the Functional Architecture, our software started with the development of a primitive World Model which was later expanded alongside the development of the Software Functions.

World Model

Figure 1: Pico's World Model

The World Model represents all the data captured and processed by Pico during its operation, and is designed to serve as Pico's real-world semantic "understanding" of its environment. It is created such that software modules only have access to the data required by their respective functions. The data in the World Model can be classified into two sections:

• Environmental Data

1. Raw LRF Data
2. Interpreted Basic Measurement Information (eg: center, left, right distances; closest and farthest points)
3. Detected corner points
4. Detected exits
5. Processed LRF data in the form of an integer gridmap
6. Global Map in the form of an integer gridmap
7. Cabinet Locations

• Robot Data

1. Operating state
2. Localised position
3. Desired trajectory
4. Odometer readings and offset data

As seen in Figure 1 (click on image to zoom), all parts of Pico's software functions (explained in the next section) interact with the World Model to access data that is specific to their respective operations. To avoid creating multiple copies of the same values and thus optimize on memory usage, each software module accesses its data using references to the World Model, thus asserting one common data location for the entire system.

Functions

This section describes the part of the software architecture that "gives life" to Pico and enables it to perform tasks according to the set requirements. Our software is modularised into four main sections: Measurement, Mapping, Planning and Actuation. As seen from their titles, each section is meant to cover a specific set of robot functions, similar to the organs in a living organism, which when put together with the World Model provide for a completely functional robot. In comparison with the paradigms stated in the course, this structure can be seen as a slightly modified version of the Perception, Monitoring, Planning and Control activities; the functions of Perception are covered by the Measurement and Mapping modules, and Monitoring and Control is covered within the Actuation module. Regardless of these differences, both structure provide the same end result in terms of robot functionality and in terms of being sufficiently modularised. The following sections describes each one of these sections and their corresponding functions, along with a list of some common shared functions at the end.

Measurement

Figure 2: Measurement Module and World Model

The Measurement module is Pico's "sense organs" division. Here, Pico can read raw data from its available sensors and process some basic information from the acquired data. Figure 2 shows the information interface between the World Model and the Measurement model. The following functions constitute the Measurement Module:

measure()

Reads and processes sensors data into basic measured information

Apart from the standard library functions to read raw data from Pico's LRF and Odometry sensors, the measure() function also interprets and records some primitive information from the obtained LRF data such as the farthest and nearest distances in Pico's current range, the distances at the right, center and left points of the robot, boolean flags indicating whether the right, center or left sectors (sectors are determined by a fixed angular deviation from a given mid point) of Pico's visible range are clear of any obstacles/walls (Figure 3). All these are stored in the World Model to be processed by any other functions that may need this data. Additionally, the measure() function also returns a status check to its parent function, which would indicate whether it was able to successfully acquire data from all sensors, or if not, which sensors failed to deliver any measurements. This would signal Pico to act accordingly in the event of consistent unavailability of data from its sensors. The measure function is the first function to be called in Pico's execution loop.

Figure 3: Pico's Sector Clear Check

sectorClear()

Indicates the presence of obstacles/walls in the vicinity of a given heading angle

This function is used to check whether there are any obstacles in a given direction of the robot. While Pico's path planning module is responsible for determining a path devoid of any obstacles, it cannot be guaranteed that Pico would respond exactly according to the planned path or that obstacles around it would stay static while it navigates around them. In this case the sectorClear() function can be fed with Pico's heading angle and thus be used to determine whether the coast is clear of if Pico needs to operate with caution on the current planned trajectory.

alignedToWall()

Determines the deviation of Pico's current heading with respect to a straight wall on the right, left or front of Pico

The alignedToWall() function measures the deviation of Pico's right, left or center LRF values from an expected parallel wall by simple trigonometric. This function is mainly used while localising Pico, to ensure Pico is oriented in a specific pre-determined orientation to obtain its position with respect to a given map. The animation in Figure 4 shows how this is used to rotate Pico till it is aligned to wall on its right.

Figure 4: Pico aligning itself to a wall on the right

Mapping

Figure 5: Mapping and World Model

Mapping of Pico's environment can be handled in two mutually exclusive scenarios: one where no global map is provided and Pico thus needs to understand its surroundings all by itself, and one where Pico has a global map and can compare its sensed data with the information provided on the map. The Mapping module therefore has two primary functions named identify() and localise() which are responsible for giving Pico a clear understanding of its environment and thus help it determine its actions based on this understanding. The Mapping module also includes several other functions that allow Pico to read and interpret provided maps, generate mapped grid spaces out of the provided map and its sensor data to be used by localise() and other path planning functions, and create visualizations on its screen of processed sensor data. As was with the Measurement module, the Mapping module also interacts with the World Model as its data bank as shown in Figure 5.

identify()

Identifies significant points such as corners and exits in Pico's vicinity

This function uses the acquired LRF data and processes it to identify significant features such as corners, and exits. While this operation is mainly used in situations where Pico does not have access to a global map, this function is also utilised to identify Pico's environment at the start of its run time in order to perform an initial "offset localisation" (explained in the Hospital Challenge section) before it can continue localising with the localise() function. The identify function uses a modified averaging comparison technique to smoothen the obtained noisy LRF data and subsequently compare the averaged data with the original LRF sequence to identify corners. This method also helps it distinguish between convex (red circle) and concave corners (blue circle) as seen in the animation in Figure 4. As several adjacent LRF points would satisfy the condition for identifying corners, all identified corner points are then clustered into single corner points by means of comparing their positions within the LRF sequence. Furthermore, by comparing the distance between two convex corners and the LRF values of distances between those two corners, this method can also identify an exit/entry point (magenta circle) within a room. [Link]

localise()

Identifies Pico's current location within a given global map

The localise() function uses a minimum difference based cost comparison technique to compare Pico's local map with the global map and thus obtain its position on the global map. This method however relies on an approximate knowledge of Pico's whereabouts on its global map, around which it performs its cost comparison. This approximate position is typically obtained after processing information from the identify() function at Pico's startup or from a combination of Pico's previously localised position, its odometry readings and any error offsets at any stage in execution after the startup. This reliance helps avoid requiring to compare Pico's local map with all possible positions on the global map, thus allowing for a local optimization of possible positions which saves on computation time.

The cost function is computed by assuming the robot to be at a given position on the global map, projecting the LRF points with respect to this position onto the global map and calculating the summation of distances of all LRF points from the closest corresponding point on the global map. The identify() function computes the cost function of several deviations with respect to the approximate location of the robot and thus obtains the position with the least cost as the actual position of the robot on the global map. To further optimize on computation time, the function can also be tuned to project intervals of LRF points onto the global map instead of all available points thus reducing the total number of distance comparisons to be made. A sample of Pico moving around a given map while localising itself is shown in Figure 7. This method also works in the presence of real-world objects that are not found on the global map, as such points corresponding to obstacles would result in a uniform increase in cost function across all considered position deviations in the optimization process. Results of the effects of obstacles on localisation can be seen in the animations provided in the Hospital Challenge section.

Figure 7: Pico Localising itself within a given map

genWeightedMap()

Converts the standard binary global grid map into a weighted integer grid map

Our solution to navigate around a pre-mapped environment is implemented through the A* Path Planning algorithm which uses a grid map to plan a trajectory between two points on the given grid. With a given global map that has all significant points and walls defined, generating a binary gridmap is a straightforward process. However, the A* algorithm, which tends to select the quickest path available, would generate path that would tend to stick quite close to the walls. Considering that the cell size of the grid map is far smaller compared to Pico's physical dimensions, this would lead to several clashes between any obstacle avoiding functions and the provided path from the path planner. To avoid this, the global grid map is converted from its binary form into a weighted integer form, where the cells with walls and other objects take the highest weights and cells surrounding these have linearly decreasing weights as you go further away from the objects. This additionally allows the path planner to generate paths that drive Pico away from such objects, even if it starts close to them. Figure 8 shows an example of such a conversion, and Figure 9 shows the difference in paths generated with and without the weighted grid map.

Planning

Planning forms the core of Pico's decision making abilities. This module is the main control center of all of Pico's activities, and it governs the way all other modules operate. It comprises one primary function named plan() that essentially operates in the form of a finite state machine. Since Pico's operations would be dependent on the task it has to perform, this is the only module that needs to change to accommodate the differences in functionality requirements between the Escape Room Challenge and the Hospital Challenge.

Actuation

Actuation::getHeading()

The heading fucntion calculates the orientation of PICO with respect to its centre .

Actuation::actuate()

Actuation function works based on desired trajectory generated by the plan function and uses that as reference and calculates the offset and the actuation values for rotation and translational velocity are adjusted accordingly to match the desired values of actuation.

Additional Functions

The main functions are aided by some other necessary functions which are as follows:

1. Data logging: The function helps to store the LRF data during the simulation process which could be used to understand how PICO sees the area around itself.
2. Polar to cartesian conversion: The raw LRF data is in polar form. This function is converts the LRF readings to cartesian coordiantes for creating a grid with a specific resolution.
3. Json to Binary map: The function is used to create a binary map with walls represented as one's and empty region as zeros.
4. Padding walls: Since the Astar algorithm algorithm tries to find the shortest possible path, there are chances that it could create a path brushing the walls. This would result PICO getting too close to the wall which is undesired. This function makes a wighted padding with the walls getting the highest weights.
5. Astar: This function computes a path from the current position of PICO to the goal point which are positioned near each cabinet.
6. Distance calculation: The function calculates the distance between any two points in the grid map.

Escape Room Challenge

The main objective of PICO is to be able exit the room from any given starting position without bumping into the walls within 10 minutes.

Link to Challenge Description

The detailed description for the Escape Room Competition could be found here.

Challenge Strategy

Initial stage in the strategy is to scan the room and search for the exit. If the exit is not found PICO will continue to rotate until it manages to find an exit. If still the exit is not detected then PICO will move approximately to the center of the room and rescan the room for an exit. This case was put in when it was observed during test runs that PICO does not manage to identify the exit if the initial position was parallel to the wall containing the exit Once the exit is found Pico will move towards the center of the exit. As soon as the exit is reached, adjustments so PICO orients the corridor. Once that is done, PICO will start to follow the corridor until it detects no corridors around itself.

End Result and Future Improvements

In the first attempt PICO slightly bumped into the wall while entering the corridor due to oscillatory movement and high velocity during diagonal movement. In the second round the maximum transnational velocity was reduced which helped it to enter the corridor smoothly. The challenge was completed in 40 seconds. Eventually our group managed to win the completion and we got some beers at the end of the final competition for the same!

Hospital Challenge

Hospital Competition is the second part of the course Embedded Motion Control. In this competition, PICO could determine the cabinet in each room and face towards all the cabinets in the right region marked previously for the given start area. When PICO visits a cabinet, it should give a clear sound of which cabinet it is visiting (i.e., “I have visited the cabinet zero”) and reach all the cabinets with a correct order. PICO could detect the obstacles in this competition not only static objects but also dynamic ones (Such as the walking actor in the hallway) and not hit any walls and objects except for slightly touching. PICO should also try to detect the static and dynamic objects and present them in its own world model. Finally, PICO should complete the task within 10 minutes and must not remain idle for more than 30 seconds. This is a brief presentation slide with a basic introduction of Hospital Competition, which could be found here

Link to Challenge Description

The detailed description for the Hospital Competition could be found here.

Challenge Strategy

1st Pico takes the list of cabinet order Then the Pico gathers the LR F data and this is processed by PIico to creates a grid map with which , it is able to localize itself within the map provided to us. Using the cabinet visiting list it determines its goal and generates a path to follow. Once the desired trajectory is generated the actuation module provides required velocity and rotation to maintain this trajectory. As it reaches the destination the current cabinet becomes the starting point and same loop is executed till it has visited all the cabinets in the given order.

State Diagram

Initial Design of Escape Room Competition

A brief summary of embedded software functions design is described in the following chapters.

Design Document

The Initial Design Plan for the Escape Room Competition and the Hospital Competition with PICO could be found here.

Functions

	Function	Description
High-level	Detect Wall	Set a safe distance between wall and PICO. If there are too closer with each other, PICO would execute corresponding movements.
	Detect Corner	Detect the number of corners of the room.
	Startup	Identity the initial angle of PICO in the start position. And then, compute an angle -- θ.
	Scan for Exit	Rotate PICO to detect all the distances between wall and robot in order to find the exact position of the corridor.
	Move to Max	If PICO do not detect enough walls in the room, it will move to the direction of the maximal distance and detect walls again.
	Face Exit	Let PICO face to the exit corridor straightly but not perfectly. PICO would not rotate itself in a defined error range.
	Drive to Exit	PICO moves to the exit.
	Enter Exit Corridor	Enter the exit corridor with a safe range between the walls of the corridor and PICO itself.
	Follow Corridor	Follow the walls of the corridor with a safe range until PICO crosses the finish line.
Low-level	Initialize	Initialize actuators
	Read Data of Sensors	Read the odometer and laser data
	Drive Forward	Move straightly
	Drive Backward	Move back
	Drive Left	Move left
	Drive Right	Move right
	Turn Left	Turn 90°left
	Turn Right	Turn 90°right
	Turn Around	Rotate
	Stop Movement	Stop current movement.

Escape Room Challenge Execution

Startup

Scan for exit

Move to max

Face exit

Exit undetectable

Orient to exit wall

Drive to exit

Enter exit corridor

Exit corridor follow

Stop

Hospital Competition

The main objective for PICO is to "deliver" the medicines from one cabinet to another which will be defined by the judges just before the challenge starts. The PICO will be operating under an environment amidst static and dynamic obstacles.

here

Software architecture

The main components of our architecture are the world model, the planning, the mapping, the measurement and actuation parts. The world model contains all the data of the environment and data like the position of the robot. The mapping module ensures the world model is updated and a map is provided. The planning ensures a path is planned from the current position of the robot towards a certain goal. The measurement part feeds data and some basic information into the word model and the actuation ensures the robot actually moves. These components will be worked out in more detail below.

World model

The world model contains all the data of the environment and the robot like its position. From the world model information is sent towards the other blocks, which process them and provide new information to the world map.

Measurement

For the measurements the laser range finder present on the PICO is used. This data is received in an array, where the indices contribute to some angle and the value of the second column present the distance to the nearest point in that direction. For calculating the angle the range of the PICO is determined during the configuration state. Once this is done, the total angle is divided by the angle increment of the PICO to determine the length of the array and multiplied again to know the angle. From the angle and the radial distance a set of Cartesian coordinates can be calculated which are used in the localization and planning parts.

Planning

The path from the current location to the destination is planned using the A* algorithm. This algorithm aims to find the path to the destination with smallest cost, where the cost the defined based on the weight of the grid map. As every grid in the map is assigned with a weight, the sum of the all the weights of the points in the path the algorithm finds out can be a candidate of the best path can be calculated. After comparing all the cost, the smallest one will be the best option, which is given in the form of the points coordinates.

Mapping

we create two types of map
1.Global map.
2.Local Map

Global Map

In order to implement the A* path planning algorithm, the given map, which is in the form of a json file, is converted into a binary map. The objects of the map is given based on points with x and y coordinates. The walls and cabinets are described with lines, where the lines are defined by the start points and end points.
The first step to build the binary map is to find the range of the map. The maximum x and y coordinates are 6.7m and 6.4m. With the resolution of 0.05m, the map is transformed into a base matrix of zeros, with size 128 by 134.
The second step is to define all the points coordinates on the line between the start and end points. This is done by adding pixel in two coordinates based on the direction of the line. After defining all the points on the line, they are assigned with 1 and added to the base matrix.

Local Map

This is created from the laser data provided the LRF .
We convert the LRF data to cartesian cordinates which in turn is used to convert it to binary map made up of 1's and 0's.
This map is used to identify any sorts of unknown structure which can be added to the global map for path planning.

Actuation

Interfaces

1. Console
2. Captured images
3. io.speak()
4. Log files

Results

Improvements

During the project the implementation ideas changed a lot. It is advisable to come to an agreement of the final implementation as soon as possible.