Embedded Motion Control 2018 Group 3: Difference between revisions
Jump to navigation
Jump to search
| Line 55: | Line 55: | ||
* PICO cannot stand still for 30 seconds or longer | * PICO cannot stand still for 30 seconds or longer | ||
* For the escape room challenge, the robot should leave the room within 5 minutes | * For the escape room challenge, the robot should leave the room within 5 minutes | ||
* For the hospital challenge, within 5 minutes, mapping, reverse parking and obtaining the object should be done | * For the hospital challenge, within 5 minutes, mapping, reverse parking and obtaining the object should be done | ||
* Its surroundings should be made visible in a map | * Its surroundings should be made visible in a map | ||
* PICO should be able to reach every position in the room | * PICO should be able to reach every position in the room | ||
* PICO should be able to leave every room | * PICO should be able to leave every room | ||
* PICO should make distinction between the hall and rooms | * PICO should make distinction between the hall and rooms | ||
* It should run autonomously, so in each challenge there should be no additional input | * It should run autonomously, so in each challenge there should be no additional input | ||
* To start your software, only one executable has to be called | * To start your software, only one executable has to be called | ||
* PICO should be able to recognize an object and stand still close to it | * PICO should be able to recognize an object and stand still close to it | ||
'''Functions:''' | '''Functions:''' | ||
* PICO should be able to drive in any direction | |||
* PICO should be able to turn around | |||
* It should be able to detect walls | |||
* PICO has to know its own position within the mapped map | |||
* PICO is able to construct a map | |||
* It should be possible to create a trajectory to a room | |||
* PICO should be able to recognize an object | |||
'''Components:''' | '''Components:''' | ||
* Sensors: | |||
** Laser Range Finder (LRF) | |||
** Wheel encoders (odometry) | |||
* Actuator: | |||
** Holonomic base (omni-wheels) | |||
* Computer: | |||
** Intel i7 | |||
** Ubuntu 16.04 | |||
'''Specifications:''' | '''Specifications:''' | ||
* Translation maximum: 0.5 m/s | |||
* Rotation maximum: 1.2 rad/s | |||
* Range of Laser Range Finder is assumed to be bigger than maximum room dimension | |||
* The field of view of the Laser Range Finder is from -2 rad to 2 rad, divided in pieces of 0.004004 | |||
* The Laser Range Finder can only measure at one height | |||
Revision as of 08:21, 9 May 2018
Group Members
| TU/e Number | Name | |
|---|---|---|
| 0848904 | Luc (L.L.M.) van den Aker | l.l.m.v.d.aker@student.tue.nl |
| 0852908 | Thomas (T.) Neilen | t.neilen@student.tue.nl |
| 0909434 | Jeroen (J.W.) van de Valk | j.w.v.d.valk@student.tue.nl |
| 0896947 | Nourdin (N.) Kaai | n.kaai@student.tue.nl |
| 0883056 | Peter (P.) van Dooren | p.v.dooren@student.tue.nl |
| 0861750 | Ties (T.J.) van Loon | t.j.v.loon@student.tue.nl |
Initial Design
Requirements:
- PICO should make no collisions with any walls
- PICO cannot stand still for 30 seconds or longer
- For the escape room challenge, the robot should leave the room within 5 minutes
- For the hospital challenge, within 5 minutes, mapping, reverse parking and obtaining the object should be done
- Its surroundings should be made visible in a map
- PICO should be able to reach every position in the room
- PICO should be able to leave every room
- PICO should make distinction between the hall and rooms
- It should run autonomously, so in each challenge there should be no additional input
- To start your software, only one executable has to be called
- PICO should be able to recognize an object and stand still close to it
Functions:
- PICO should be able to drive in any direction
- PICO should be able to turn around
- It should be able to detect walls
- PICO has to know its own position within the mapped map
- PICO is able to construct a map
- It should be possible to create a trajectory to a room
- PICO should be able to recognize an object
Components:
- Sensors:
- Laser Range Finder (LRF)
- Wheel encoders (odometry)
- Actuator:
- Holonomic base (omni-wheels)
- Computer:
- Intel i7
- Ubuntu 16.04
Specifications:
- Translation maximum: 0.5 m/s
- Rotation maximum: 1.2 rad/s
- Range of Laser Range Finder is assumed to be bigger than maximum room dimension
- The field of view of the Laser Range Finder is from -2 rad to 2 rad, divided in pieces of 0.004004
- The Laser Range Finder can only measure at one height