Embedded Motion Control 2018 Group 6: Difference between revisions
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
=== Use cases for Escape Room=== | === Use cases for Escape Room=== | ||
1. Mapping | |||
2. Move with a certain profile | |||
3. Navigate | |||
=== Use cases for Hospital Room=== | |||
(unfinished) | |||
1. Mapping | 1. Mapping | ||
2. Move with a certain profile | 2. Move with a certain profile | ||
| Line 30: | Line 36: | ||
R3.1 The system | R3.1 The system | ||
R4.? The system shall complete the task within 5 minutes | R4.? The system shall complete the task within 5 minutes | ||
Revision as of 14:55, 3 May 2018
=== Group members ===
T.O.S.J Bosman (1280554): t dot o dot s dot j dot bosman at student dot tue dot nl
R. Bartelds
S.J.M.C. Scheepens (0778266): s dot j dot m dot c dot scheepens at student dot tue dot nl
J. Geijsberts (0896965): j dot geijsberts at student dot tue dot nl
R. Gajapathy (1036818): r dot gajapathy at student dot tue dot nl
T. Albu (19992109): tfalbu at gmail dot com
Use cases for Escape Room
1. Mapping 2. Move with a certain profile 3. Navigate
Use cases for Hospital Room
(unfinished) 1. Mapping 2. Move with a certain profile 3. Orient itself 4. Navigate
Requirements for Escape Room
R1.1 The system shall detect walls without touching them R1.2 The system shall detect the goal/door R1.3 The system shall log and map the environment
R2.1 The system shall move slower than 0.5 m/s translational and 1.2 rad/s rotational R2.2 The system shall not stay still for more than 30 seconds
R3.1 The system
R4.? The system shall complete the task within 5 minutes