RoPod/Tutorials/Matlab Installation: Difference between revisions
Jump to navigation
Jump to search
(Created page with '<div style="width: 40%; float: right;"><center>{{:RoPod_Table_Menu}}</center></div> <div STYLE="float: left; width:60%"> In order to install Matlab, run the following commands:…') |
No edit summary |
||
| Line 6: | Line 6: | ||
<pre>sudo apt-get install cifs-utils | <pre>sudo apt-get install cifs-utils | ||
mkdir /mnt/matlab </pre> | sudo mkdir /mnt/matlab </pre> | ||
Then follow this instructions: | Then follow this instructions: | ||
Revision as of 14:55, 7 April 2017
RoPod Navigation:
Info
RoPod Configuration
Other
In order to install Matlab, run the following commands:
sudo apt-get install cifs-utils sudo mkdir /mnt/matlab
Then follow this instructions: ftp://ftp.tue.nl/tue-ftp/pub/windows/campus/matlab/Linux/EN_MAN_Matlab_InstAct_Linux.pdf
Install (at least) the following toolboxes:
- Robotic Systems Toolbox.
- Embedded Coder.
- Other desired toolboxes.
Later you can add more toolboxes if needed by following the same installation instructions.
In the next set of instructions, we are going to install the Matlab and RoPod interface.