Embedded Motion Control 2014 Group 1

Group Info

Name:	Student id:	Email:
Groupmembers (email all)
Sander Hoen	0609581	s.j.l.hoen@student.tue.nl
Marc Meijs	0761519	m.j.meijs@student.tue.nl
Wouter van Buul	0675642	w.b.v.buul@student.tue.nl
Richard Treuren	0714998	h.a.treuren@student.tue.nl
Joep van Putten	0588616	b.j.c.v.putten@student.tue.nl
Tutor
Sjoerd van den Dries	n/a	s.v.d.dries@tue.nl

Meetings

1. Meeting - 2014-05-02

Time Table

Fill in the time you spend on this course on Dropbox "Time survey 4k450.xlsx"

Planning

Week 1 (2014-04-25 - 2014-05-02)

• Installing Ubuntu 12.04
• Installing ROS
• Following tutorials on C++ and ROS.
• Setup SVN
• Plan a strategy for the corridor challenge

Week 2 (2014-05-03 - 2014-05-09)

• Finishing tutorials
• Interpret laser sensor
• Positioning of PICO

Week 3 (2014-05-10 - 2014-05-16)

• File:Presentatie week 3.pdf
• Starting on software components
• Writing dedicated corridor challenge software

Software architecture

We decided to use a architecture as seen as the following figure:

The components with their respective functions and in and outputs are listed here + who wil work on it:

node	subscibes topic:	input	publishes on topic:	output	Description
Line detection - Sander	-	laser scan		lines consisting out of start and end point (x_1,y_1),(x_2,y_2) etc.	transformation of raw data to lines by use of hough-transform
Position - Richard		line coordinates		(X_left, X_right, Y, theta) also named 'relative position'	Determine distance to wall to left, right and front wall. Also determines angle theta with respect to the corridor.
Arrow detection		camera		Arrow left of right	determine if pico sees an arrow and in what direction.
state recognition - Joep		lines, vision, relative position		an integer of whitch state is recognized	recognize situation and transform this to one of the states.
setpoint generator - Wouter		state, relative position		speed and position	Create setpoint for position of pico by use of state. (determine wanted position and speed).
Drive - Marc		setpoint, relative position		x,y,thata (Moving pico)	make sure that pico is positioned centered if this is needed and turn when needed.

Line detection - Sander
inputs: --
function: transformation of raw data to lines by use of hough-transform
output: lines consisting out of start and end point (x_1,y_1),(x_2,y_2) etc.

Position - Richard inputs: line coordinates
function: Determine distance to wall to left, right and front wall. Also determines angle theta with respect to the corridor.
output: (X_left, X_right, Y, theta) also named 'relative position'

Drive - Marc
inputs: setpoint, relative position
function: make sure that pico is positioned centered if this is needed and turn when needed.
outputs: (Moving pico)

state recognition - Joep
inputs: lines, vision, relative position
function: recognize situation and transform this to one of the states.
For the corridor challenge the following states are defined:

1. initialization
2. exit left
3. exit right
4. straight driving
5. collision
6. exit (stop with the program).

setpoint generator - Wouter
input: state, relative position
function: Create setpoint for position of pico by use of state. (determine wanted position and speed).
output: speed and position

PICO states corridor challenge

For the robot, the internal states can be visualized as in the following figure: