PRE2019 3 Group4 Printing: Difference between revisions
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
Our printing contact is located in Eindhoven. He had his printer placed at his student-home. The first problem we faced was that the filament we bought didn’t stick properly on the base-plate of the printer. In this case, often something like hairspray is used. But even this wouldn’t make the print stick. The ultimate solution for this was to cover the base plate with sticky tape, which solved this problem. | Our printing contact is located in Eindhoven. He had his printer placed at his student-home. The first problem we faced was that the filament we bought didn’t stick properly on the base-plate of the printer. In this case, often something like hairspray is used. But even this wouldn’t make the print stick. The ultimate solution for this was to cover the base plate with sticky tape, which solved this problem. | ||
[[File:printing1. | [[File:printing1.jpg|300px|left|thumb|Testing the design on a breadboard.]] | ||
Revision as of 16:55, 25 March 2020
Printing
First of all the case was divided in 3 separate parts. This was done to make the printing easier since each part now properly fits on the base plate.
Our printing contact is located in Eindhoven. He had his printer placed at his student-home. The first problem we faced was that the filament we bought didn’t stick properly on the base-plate of the printer. In this case, often something like hairspray is used. But even this wouldn’t make the print stick. The ultimate solution for this was to cover the base plate with sticky tape, which solved this problem.
