Embedded Motion Control 2014 Group 4

Members of group 4

Khy, R.N.	Norent
Kiriouchine, V.I.	Seva
Kiuijk, F.J.M. van	Fransis
Marx, S.	Sanne
Smit, J.	Jorrit

Planning

Week 1:
-Introduction Lecture
-determine course goals

Week 2:
-Install Ubuntu, ROS, fix SVN etc.: get everything up and running
-Finish all tutorials: C++, ROS
-Think of first concepts to tackle the corridor problem
-Implement first concepts: wallfinder, angle/distance controller

Week 3:
-Improve angle/distance controller
-Try to implement holonomic concept
-Meet tutor to discuss problems and project progress
-Perform Pico Test

Week 4:
...
-Corridor competition

Log

Week 2:
Monday 28-04-2014: Group meeting SEL/SOL
Present: Sanne, Seva, Norent, Fransis

-Installed all software on laptops
-Got the svn up and running
-Started with tutorials and discussed problems

Wednesday 30-04-2014: Meeting SEL/SOL
Present: Sanne, Fransis

-Finished tutorials

Friday 02-05-2014: Meeting OGO 2
Present: Sanne, Seva, Norent, Fransis

-Created concepts: wallFinder, angle/distance controller, exitFinder, Cornering
-Implemented the following concepts: wallFinder, angle/distance controller:
Pico now can detect walls and navigate through the corridor, not controlled optimal yet

Week 3:
Wednesday 07-05-2014: Group meeting OGO 18
Present: Sanne, Seva, Norent, Fransis
-Held first tutor meeting with Sjoerd
-Created holonomic concept
-Prepared for real world Pico test

Concepts

wallFinder
Pico should be able to recognize walls. This can be done by using the Laser Range Finder. The data received from the Laser Range Finder must be filtered to get useful data that can be used by our controller.
From this sensor we receive an array with distances, 270 degrees around Pico. This array is split in half to represent vision on the left and right side. In these two arrays we search for the smallest distance that is greater than 0.15 m (a part of the vision is blocked by Pico him/her/it-self). Finally the angle at wich these distances are with repsect to Pico are calculated. This function thus finds two distances and two corresponding angles.

Angle/Distance controller
When Pico navigates through the corridor the distances found by the wallFinder are controlled to be equal. Besides the distances, the angles at which these distances are detected should be controlled to be zero. When the closest distances left and right of pico are equal and the angles zero, Pico is oriented in the middle of the corridor oriented in the longitudinal direction, which is exactly what we want.

Holonomic movement
At the tutor meeting it became clear that Pico is equipped with omni-wheels which means holonomic movement is possible. Currently the Pico in the simulator has differential wheels. With omni-wheels the distance can be controlled independent of the angle.

Cornering
We should think of how Pico can recognize and take corners.

findExit
We should think of how Pico can recognize the exit of the corridor so that it stops moving.

Implemented concepts

wallFinder
Angle/Distance controller

Time Table

Overview of time spent per group member

	Lectures	Group meetings	Mastering ROS and C++	Preparing midterm assignment	Preparing final assignment	Wiki progress report	Other activities
Week_1_Norent	2
Week_1_Seva	2		6
Week_1_Fransis
Week_1_Sanne	2		2
Week_1_Jorrit
Week_2_Norent	2		6
Week_2_Seva
Week_2_Fransis	2	4	6
Week_2_Sanne	2	6	4			0.5
Week_2_Jorrit
Week_3_Norent			5	3			1
Week_3_Seva
Week_3_Fransis		7
Week_3_Sanne
Week_3_Jorrit
Week_4_Norent
Week_4_Seva
Week_4_Fransis
Week_4_Sanne
Week_4_Jorrit
Week_5_Norent
Week_5_Seva
Week_5_Fransis
Week_5_Sanne
Week_5_Jorrit
Week_6_Norent
Week_6_Seva
Week_6_Fransis
Week_6_Sanne
Week_6_Jorrit
Week_7_Norent
Week_7_Seva
Week_7_Fransis
Week_7_Sanne
Week_7_Jorrit
Week_8_Norent
Week_8_Seva
Week_8_Fransis
Week_8_Sanne
Week_8_Jorrit
Week_9_Norent
Week_9_Seva
Week_9_Fransis
Week_9_Sanne
Week_9_Jorrit
Week_10_Norent
Week_10_Seva
Week_10_Fransis
Week_10_Sanne
Week_10_Jorrit