Embedded Motion Control 2015 Group 2

Go back to the main page.

---

---

Group Members

Name:	Student id:	Email:
Groupmembers (email all)
Wouter Kuijpers	0864565	w.j.p.kuijpers@student.tue.nl
Carel Wechgelaer	0874762	c.a.wechgelaer@student.tue.nl
Natalia Irigoyen	0929175	n.irigoyen.perdiguero@student.tue.nl
Stephanie Dávalos	0925756	s.davalos.segura@student.tue.nl
Georgi Hristov	0931293	g.s.hristov@student.tue.nl
Paul Padilla	0926256	g.p.padilla.cazar@student.tue.nl
Garbí Singla	0932046	G.Singla.Lezcano@tue.nl
Amritam Das	0923872	a.das.1@student.tue.nl
Tutor
Luis Ferreira	n/a	L.F.Bento.Ferreira@tue.nl

Planning

Week 1 (22/4 - 29/4)

Problem formulation, ideas on design as well as task allocation. Additional work on :

• Intitial design document
• Presentation preparation
• Ubuntu set-up with all required software running
• C++ tutorials

Week 2 (29/4 - 06/5)

• Allocation of team roles in the project
• Finish of presentation
• Finish of C++ tutorials
• Meet tutor and discuss design
• Use his feedback to improve design document

Week 3 (06/5 - 13/5)

• Presentation of initial design
• Revision of design document
• Corridor completion task :
  • Tasks and code structure breakdown
  • Work allocation
• Testing on the actual robot :
  • 11/5 - Due
  • 12/5 - Due

Initial Deisgn

Goal

Design and implement software for the PICO robot, such that the robot is able to find the exit of the maze as quickly as possible and in a fully autonomous way.

Requirements

• Use the PICO robot to solve the “A-Maze-ing challenge.”

• The PICO robot should reach the end of the maze in the shortest time.

• The PICO robot should operate fully autonomously; after starting the robot it should make all decisions about navigating autonomously.

• The operation of the PICO robot should be independent of the maze configuration.

• During operation the PICO robot should not collide with anything, e.g. walls, doors, robots and humans.

• The software used to interface with the PICO robot should contain a software-based kill- switch to allow manual termination of the robot.

Functions

• Basic - start, stop, move forward, turn
• Navigation - maze solving algorithms and optimal path calculation
• Maze mapping - survey the area, search for doors
• Safety - keep minimum distance from walls, respond to kill-switch

Components and Specifications

• 

• Robot Context - Low-level specifications of the PICO Robot. The robots hardware abstractions layer which takes care of all low-level sensing- and actuation-capabilities of the robot.
• Skills Context - Contains the above mentioned robot functionalities.
• Environment Context - Semantic maze model.
• Task Context - Controls the execution of the robot’s skills depending on the challenge and the environment context. The task context is divided into three major parts :
  • Task control feedback: Depending on the information received from the task monitor contributes in controlling the robot skills.
  • Task control feedforward: Depending on the state and the goal of the challenge contribute in controlling the robot skills.
  • Task monitor: Monitors the execution of the skills and sends this information to the task control feedback which in turn decides upon a new control action.
• Challenge Context - Contains all the information about the maze-challenge at hand such as the rules of the game and goal of the game.

Interfaces

• Skill context – Robot context: This interface takes care of sending commands to low-level hardware and returns sensor signals.
• Challenge context – Environment context: This interface takes care of assumptions about the maze and goal approach.
• Task context – Environment context: This interface takes care of providing the correct information to the task context in order to make decisions based on the maze map.
• Task context – Skill context: This interface takes care of the skill selection based on both the contribution of the task control feedback and task control feedforward.
• Challenge context –Task context: This interface takes care of providing the goal of the challenge context to task context, in order to make decisions to aim for the goal of the challenge while adhering to the rules of the game.
• The Challenge context also provides the interface to control the robot from the outside of the field, this involves commands to start and stop the robot and provide information about the current status of the robot in the maze.

Files

• Design Document - File:Design Document.pdf
• Initial Presentation - File:Initial Presentation.pdf