PRE2020 4 Group6: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
 
(402 intermediate revisions by 4 users not shown)
Line 1: Line 1:
=Group members=
{| border="1" cellpadding="2"
{| border="1" cellpadding="2"
|----
|----
Line 28: Line 30:
|}
|}


=Subject=
=Subject of this project=
The following concept was the basis on which we started designing. (Of course, things change during development when new insight or limitation come to light. But this is normal when designing a larger project and it shows that we have learned new things, based on which adaptations are made.)


=Branding, themes, and names=
The idea is to create a smart plant system that notifies the user if the plant needs more water or more or less sunlight. The target group is a social workspace or carehouse for mentally disabled people, Down syndrome in particular. These people can see or hear when a plant needs attention and get that plant what it needs. The mentally disabled will therefore do something useful (taking care of plants) which is valuable to them and the surroundings. The caretakers in this social workspace will also get work relief because of this system because they don’t have to tell the impaired person what to do with the plants anymore. The plant pot will probably get a nice face so that it looks friendly. It will need water sensors implemented in the soil and light sensors around the plant to monitor the amount of light the plant gets. The pot will also give positive feedback when given water or sunlight.


A good marketable product needs a brand name. With its own name, customers can more easily refer to your product and you create a more memorable experience. After a good reputation has been established your brand name can help sell other products since people know they can expect quality products from a reputable brand.  Lastly, branding helps to set your product apart from competitors [1]. There are entire studies and companies that solely focus on branding and marketing. Branding is not really an area on which we have decided to spend our limited resources for this assignment. However, we did brainstorm on some names and themes for our smart plant pot. We have concluded that theming the pot was unnecessary for this prototype. We considered giving it a pop-icon theme that would be recognised and like by most users, but this very quickly leads to problems with copyright. Secondly, we feared that theming the pot would take away attention from the display and lights that the pot uses to gain the attention of the users in its surroundings. Thirdly, we thought that the caretakers might prefer a clean white design as opposed to a spiderman-pot with a tulip in it. The caretakers are the ones who have to purchase and install the system, so their preferences are also of interest.
=Approach=
In order to realize this idea, a well-structured approach need to be made and followed. First a schedule and a plan was made together with a global task-division, the plan, task-division and logbooks can be found in Appendix A. Then the goals were defined to make sure we had something to work to. To broaden our perspective of our target audience we did literature study on several subjects, from articles of the state-of-the-art, to information on plants and their effects on humans and of course articles on our target audience: people with Down Syndrome.


For the name of the product, we have considered a few options. In the end, we have decided to go with FLEUR. This is a common Dutch name that is easy to remember and pronounce. FLEUR is a name derived from words for flower or flowering, we found this to be fitting since our product is designed to house a plant, of which many have flowers and in our test period we will fill it with a tulip.  
The next step was to make analyze whether our idea had purpose for user, society and enterprise and how to improve our idea on their needs and preferences. When we had a clear vision about the goals and the target audience the technical part could begin. We had to make a list of requirements, preferences and constrains of our idea and future-prototype so that we could finally start building it.  


*[1] https://www.brandingmag.com/2015/10/14/what-is-branding-and-why-is-it-important-for-your-business/#:~:text=Branding%20is%20important%20because%20not,to%20expect%20from%20your%20company.&text=There%20are%20many%20areas%20that,responsibility%2C%20reputation%2C%20and%20visuals
Before the actual assembling, a list of electrical components needed to be made as well as a design for the housing, software and hardware. So that finally the hardware would be ordered and assembled, the housing could be printed and the software would be coded and thus the prototype could be made.


==Idea==
Parallel to the technical part, we still needed to test whether our design in the end would have the effect on the user, society and enterprise as we wanted it to have. We decided that the user was the most important of those three and thus we contacted actual care houses if we could place our prototype in their house for a few days or a week to see whether our design would have potential for a real manufactured product.  
The idea is to create a smart plant system that would notify the user if it needs either water or more or less sunlight. The target group is a social work space (zorginstelling) for mentally disabled people. They can see or hear which plant needs attention and get that plant what it needs. The social workers will therefore do something useful which is very great for such people. The people monitoring this social work space will also get a great work relief because of this system because they don’t have to tell these people what to do with the plants anymore. The plant pot will probably get a nice face so that it looks like a friendly robot and it will get water sensors implemented in the soil and light sensors around the plant to monitor the amount of light the plant gets. The pot will also be able to notify when it is being moved or given water and will start saying nice things to the person moving it or giving it water.


==USErs==
We needed to address also the enterprise-part of the process in order to gain publicity. In the first place this was necessary for us to convince care houses that our prototype was worth testing. However, in the second place, in a real assemble process, you need costumers and sponsors before the prototype can actually be made.


===User===
The point came where we finished assembling two prototypes and we had found two different care houses where we could test our prototype, now named Fleur. Therefore an experiment was set-up and a hypotheses must be written. After the test week, the results needed to be processed and a conclusion and discussion on the test and on the whole process should be made. And last but not least the presentation to our colleagues and tutors must be prepared and given.


The main target group for this product is people with a mental disability. The product is designed to help the users overcome some of the challenges that they face due to their disability. "Mental disability" is a very broad term and can out itself on a whole spectrum of problems, ranging from difficulty with speaking to recognising emotions. For the sake of making a more tailored product, we have decided to focus on people with Down syndrome. This decision allows us to gather more specific needs and requirements from the users (which can be found in its own section).  
Every step of the way will be discussed in much detail in this Wikipedia page.


Our robot will notify the user by speech when a plant needs more or less water, or more or less sunlight. This way the product helps the user take care of a plant without having to do complex tasks like remembering when and how often a plant needs water or sunlight. Our robot gives simple, chopped up clear instructions so that the user knows what is being expected from him/her. After a task is completed, the robots will give confirmation in the form of positive feedback to the user. This helps assure the user that a task has been successfully completed. This way our product makes caring for plants more accessible for people with Down syndrome. which has all types of benefits (see Sources XXXX)
=Goals=


The secondary users are the caretakers. The product is meant to be used by people with Down syndrome but is meant to be bought and installed by the caretakers. This device helps relieve workload from the caretakers by automating a part of the managing and task distribution process in a social work environment. Therefore it is important to always be mindful of who the users of specific functions is and what their needs and capabilities are.
To make a successful project and in the end prove that the design was successful (or not), we need to define clear and measurable goals. Besides this, we need to think about how the achievement of these goals will be proven.


===Society===


Some say that a society is measured by how it treats its weakest members (famous misquote NOT by Ghandi {Does this need an extra source?}). We realise that our product will not solve any world crisis or drastically improve the farming capacity of social workspaces, but it helps people who need a little bit more care. Our robot allows people with Down syndrome to more easily perform work, giving them a way to spend their day and make themselves (somewhat) useful. This benefits society by allowing better participation across all layers of society and show empathy and care toward those who need it the most.
'''Our main goal''' is to add something to the daily lives of people with DS. We want to give them a way to spend their time, and give them something to care for. Interacting and caring for the plant should be a hobby, something that they enjoy doing and spending time on. This is a beautiful idealistic goal that improves the wellbeing of these people and can therefore be marketed as a healthcare product that could even be covered by healthcare insurance.  


Secondly, this helps relieve some of the workload of social caregivers who are often overworked. Financing for this sector generally low {does this need a source?} and our product might save some valuable time by automating some simple repetitive tasks.
This can be measured by keeping track of how much time is spent interacting with our pot compared to a control plant that does not have our systems attached to it. Secondly, we can question the users about their overall experience with our product. We do this by asking the users to rate individual aspects of this product on a 5 point scale as an improvement over normal plants? This way we get a quantitative measure of what our system adds to the weekly routine (time and enjoyment wise).  


===Enterprise===


This product of course has to be developed and manufactured. This creates jobs and potential revenue which is all good for the economy. Products of these types do already exist (see sources XXXX) but there are mainly focused on increasing greenhouse yield. This product has a different goal and is therefore unique enough to not have to deal with fierce competition in the market, giving it a fair shot at succeeding in our opinion.
'''Our second goal''' is to improve the independence of the users with DS and teach them how to care for something. Our product provides routine and clear simple instruction. This will help the people with DS to take care of the plants themselves without any external help from caretakers. This improves their independence which is a trait that is heavily valued by the caretakers we interviewed. When these people become more independent they require less care and gain more freedom, which improves their quality of life. Secondly, this product will develop the skill to care for something. This is a useful skill for people who need care. If you teach these people basic caring skills they can help themselves and each other better.


=Plan=
Testing the increase in independence and caring skills from 1 week of usages will be difficult since changes are expected to be small and these characteristics are not so simple to measure. Hence this will probably be assessed by the caretakers who will be present during the testing stage.
==Week 1==
*Come up with an idea (all)


*Make the planning (Bert, Nando)


*Find relative papers (all)
'''Our third goal''' is to remove some workload from the caretakers. We know that it is not always easy to work in the (health)care sector and especially with the covid-19 situation the pressure on these people is high. If our product manages to independently keep the people with DS occupied, it will mean more free time for the caretakers to spend on others work or just relax a bit so this goal ties in with the second goal.


*Decide who the USErs will be (all)
This can be tested by comparing the time a caretaker spends on helping these people take care of normal plants VS the time spent installing and explaining our product. If our product proves to be too complicated to use, we can get feedback from the caretakers that it took too much time and energy to adapt to the new system and that it was not as independent as we had hoped.
 
*Research about why it is good for the users (all)
 
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 10
| Group formation(0.5), watched lectures(0.5), done research about the subject(3), searched for sources about the subject(4), edited the cstwiki(2)
|-
| Bert
| 10
| Group formation(0.5), watched lectures(0.5), done research about the subject(3), searched for sources about the subject(4), edited the cstwiki(2)
|-
| Nando
| 10
| Group formation(0.5), watched lectures(0.5), done research about the subject(3), searched for sources about the subject(4), edited the cstwiki(2)
|-
| Dorien
| 10
| Group formation(0.5), watched lectures(0.5), done research about the subject(3), searched for sources about the subject(4), edited the cstwiki(2)
|}


==Week 2==


*Literature study (all)
'''Our fourth and least important goal''' is to improve the health of the plants. Having healthy plants benefit the air quality and the overall look of a space. Secondly, it is nice if the care institution has to less regularly buy new plants, this saves time and money (which are already scarce resources).


*Contact the carehouses for information (Nando, Dorien)
This can be tested by starting off with two plants of the same type and health. One will be the control plant and the other will be planted in our pot. Both will be placed in the care home. After the testing period, the health of both plants will be assed. We do realise that assessing plant health is a bit subjective and that the sample size is really low, but we have to make do with what we can do in the restricted time and budget.
It is also interesting to note that a smart pot that improves plant health is also an interesting product for the agricultural sector and greenhouse industry, seeing how dutch farmers need to produce with high efficiency to compete in the market because of the high prices for ground.


*Improve USErs section on wiki (Marijn)
==Objectives==
Besides these goals, we also defined the following more practical objectives to strive for.


*List the needs this user requires (Marijn, Dorien)
'''Cost efficient/Affordable'''


*Research about possible components (Nando, Bert)
The prototype should make optimal use of the available resources. Furthermore the components and assembly process should be as cheap as possible to reduce the total production cost, making the design cheaper for users (or obtaining a bigger profit margin for the vendor)


*RPC list (Dorien, Marijn)


*Design an electrical circuit (Bert)
'''Easy to use'''


{| border=1 style="border-collapse: collapse;" cellpadding = 2
The prototype should be easy to install and operate. This is especially important considering the target audience of mentally handicap people. This product is designed to help these people with doing more complex tasks. If the operation of the product is not extreme straight forward it will only work counter effectively.
! Name
! Total hours
! Tasks
|-
| Marijn
| 10
| Group meeting (2x2u), Improving the users/society/enterprise section (1u), Literature study into the needs of people with DS (2u), improving our schedule and gathering action points for this week(1u), redefining our goals and thinking about a way to test those (2u)
|-
| Bert
| 10
| meetings (5.5u), research about components (2u), designing possible electrical circuit (0.5u), thinking about questions we want to ask (2u)
|-
| Nando
| 13
| Group meeting (1x1u and 1x3.5u), Improving the approach section(0.5u), literary study into simular systems that already exist(4u), meeting with a caretaker and processing the results(4u)
|-
| Dorien
| 9.5
| Group meetings (1+3.5h), literary study into the approach of people with DS (2h), prepare questions to healthcare institutions (2h), prepare mails and calls to healthcare institutions (1h)
|}
 
==Week 3==


*Research about the components and order them (Nando, Dorien)


*Adjust the planning with the test weeks (Dorien)
'''Friendly/Positive reinforcement'''


*Make CAD design of the 3D printed pot (Nando)
We want the product to interact nicely with the user. The product should communicate with the user in a friendly manner and compliment the users when they perform an action. This makes the product more pleasant to use. The explicit positive reinforcement confirms to the mentally disabled people that they are in fact doing a good job.


*Work on the code (Bert)
==Deliverables==
*The first deliverable will be this wiki page. It logs our progression and helps the tutors and other people with an interest in our project to follow the progression and developmental steps of the project.


*Make test plan for the experiment (Marijn)
*The second deliverable will be 2 physical prototypes of our smart plant pot.


*Prepare the experiment (all)
*The third deliverable is the final presentation, in which we present our project to our teachers and peers.


*Re-adjust RPC list (Nando, Marijn)
=Literary study=
In order to gain broader perspectove on the field of plants, the effect of plants and people with Down Syndrome, we needed to do much literature study. in the last chapter before the appendices, a list of sources is present of the articles we read to gain this knowledge.


*Extend the approach section on the wiki (Dorien)
=USEr analysis=
This anaylysis of user, society and enterprice is made based on literature study as well as contact with caretakers of mentally disabled people among which people with Down Syndrome.We sent out an email with a questionnaire for hypothetical use. The mail together with the statements we asked to the caretakers and the results of those are given in appendix B. Next to the several emails we send to multiple carehouses, we held close contact with a specific caretakers that one of us knows personally. The result of the interview with the latter care taker can be found in appendix C.


*Make the BoM (Dorien)
==User==


{| border=1 style="border-collapse: collapse;" cellpadding = 2
The main target group for this product is people with a mental disability. The product is designed to help the users overcome some of the challenges that they face due to their disability. "Mental disability" is a very broad term and can out itself on a whole spectrum of problems, ranging from difficulty with speaking to recognising emotions. For the sake of making a more tailored product, we have decided to focus on people with Down syndrome. This decision allows us to gather more specific needs and requirements from the users (which can be found in its own section).
! Name
Our robot will notify the user by speech when a plant needs more or less water, or more or less sunlight. This way the product helps the user take care of a plant without having to do complex tasks like remembering when and how often a plant needs water or sunlight. Our robot gives simple, chopped up clear instructions so that the user knows what is being expected from him/her. After a task is completed, the robots will give confirmation in the form of positive feedback to the user. This helps assure the user that a task has been successfully completed. This way our product makes caring for plants more accessible for people with Down syndrome. which has all types of benefits [11], [12], [13], [14]
! Total hours
The secondary users are the caretakers. The product is meant to be used by people with Down syndrome but is meant to be bought and installed by the caretakers. This device helps relieve workload from the caretakers by automating a part of the managing and task distribution process in a social work environment. Therefore it is important to always be mindful of who the users of specific functions is and what their needs and capabilities are.
! Tasks
|-
| Marijn
| 10.5
| Meetings (5h), writing the goals section (1.5h), writing the hypothesis section (1h), writing the experiment section (1h), writing the questionnaire (1h), writing the RPC list (1h).  
|-
| Bert
| 11
| meetings (5h), contacting care facilities (2h), research about the M5Stack (2h), research about how the programming works (2h)
|-
| Nando
| 9
| meetings (5h), research about components and order them (2h), Working on the CAD design (2h)
|-
| Dorien
| 11
| Meetings (5h), research about components and order them (2h), make BoM (1h), adjust planning including test week (1h), extend the approach section (2h)
|}


==Week 4==
===User Needs and Preferences===
People with Down syndrome have different needs and preferences compared to people without intellectual disabilities. A good product should address all of the user's needs and as many possible preferences. So in order to develop a good product one should have a clear idea of what these needs and preferences are. To gather this information we have called several care institutions asking them if they would be interested in helping us answer some questions and/or help test the first prototype. Secondly, we decided to also do a literary study into this subject to obtain even more information from other sources.
From the literature, we have found that language development is moderate to severely compromised in some children with DS and that therefore most individuals with DS also have less developed language skills at all ages in life compared to people without an intellectual disability (Lemons, 2010) and (Chapman, 2000) To accommodate for this lack in linguistic skills there are a few things that one can do to improve communication with people with DS. 1)Use repetition 2)Show that you are pleased 3)Be patient.


*Print the pot (Nando)


*Pick up the components of the system (Dorien)
Of course, there are more items, but these were the ones that we identified to be the most important and the ones that we could play into.
We also made a questionnaire which we sent to multiple care institutions, from the results we concluded that it is very important to call the attention of people with the syndrome of down via multiple channels. For example with sound, display on the screen and blinking LED lights, because it might be hard to hear something in a very noisy room. The most important approach to these people is being positive and cheerful and to keep the message simple and clear. It is very important to remove cables from sight, they love cables and seeing what happens when they pull on them.


*Built the system, finish the first, start with the second
==Society==


*Start testing the code (Bert)
Some say that a society is measured by how it treats its weakest members. We realise that our product will not solve any world crisis or drastically improve the farming capacity of social workspaces, but it helps people who need a little bit more care. Our robot allows people with Down syndrome to perform work more easily and giving them a way to spend their day and make themselves (somewhat) useful. This benefits society by allowing better participation across all layers of society and show empathy and care towards those who need it the most.
 
Secondly, this helps relieve some of the workload of social caregivers who are often overworked. Financing for this sector is generally low and our product might save some valuable time by automating some simple repetitive tasks.
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 11
| Group meetings 4h, Making the email with questionnaire for hypothetical use 3h, Gather email addresses 1h, Sending all the mails 0.5h, Update RPC list with interface/interaction 0.5h, Making a story board for promo video 1.5h, Exploring possible names for the system 0.5h


|-
==Enterprise==
| Bert
| 16
| Group meetings (4h), getting the M5Stack working (2h), coding the M5Stack (10h)
|-
| Nando
| 14
| Group meetings 4h, making the design in NX 7h, researching the plastics needed for 3d printing 1.5h, setting up the 3d printer/starting the prints 1.5h.
|-
| Dorien
| 8
| group meetings (4h), picking up the components and getting the M5Stack working (4h),
|}


==Week 5==
This product of course has to be developed and manufactured. This creates jobs and potential revenue which is all good for the economy. Products of these types do already exist [1], [2], [25] but these are mainly focused on increasing greenhouse yield. This product has a different goal and is therefore unique enough to not have to deal with fierce competition in the market, giving it a fair shot at succeeding in our opinion.


*Finish the code
===Branding, themes, and names===


*Finish building the second system
A good marketable product needs a brand name. With its own name, customers can more easily refer to your product and you create a more memorable experience. After a good reputation has been established your brand name can help sell other products since people know they can expect quality products from a reputable brand. Lastly, branding helps to set your product apart from competitors. There are entire studies and companies that solely focus on branding and marketing. Branding is not really an area on which we have decided to spend our limited resources for this assignment. However, we did brainstorm on some names and themes for our smart plant pot. We have concluded that theming the pot was unnecessary for this prototype. We considered giving it a pop-icon theme that would be recognised and liked by most users, but this very quickly leads to problems with copyright. Secondly, we feared that theming the pot would take away attention from the display and lights that the pot uses to gain the attention of the users in its surroundings. Thirdly, we thought that the caretakers might prefer a clean white design as opposed to a spiderman-pot with a tulip in it. The caretakers are the ones who have to purchase and install the system, so their preferences are also of interest.
For the name of the product, we have considered a few options. In the end, we have decided to go with FLEUR. This is a common Dutch name that is easy to remember and pronounce. FLEUR is a name derived from words for flower or flowering, we found this to be fitting since our product is designed to house a plant, of which many have flowers.


*Prepare the experiment
=RPC list=
Before the actual assembling the system needs a design. To clearly have an idea of a good design it is important to have a list of requirements, preferences and constraints, in short RPC-list.


{| border=1 style="border-collapse: collapse;" cellpadding = 2
===Requirements===
! Name
*The pot needs to be able to sense the moisture content of the ground
! Total hours
*The pot needs to sense the amount of sunlight it receives
! Tasks
*The pot has to be able to identify the plants' needs based on sensor input
|-
*The pot has to be able to notify the user what the plant requires
| Marijn
*The pot needs to be able to hold a plant
| hours
*The pot cannot harm the user via electronics or any other way
| tasks
*The pot has to be waterproof for when spill accidents happen
|-
*The pot has to be strong enough to withstand being moved around. This being gently or roughly.
| Bert
| hours
| tasks
|-
| Nando
| hours
| tasks
|-
| Dorien
| Hours
| tasks
|}


==Week 6==
===Preferences===
*The pot should have a speaker to address the users in a positive and friendly way
*The pot should make minimal small talk like asking how the other person is
*The pot should tell the users what it requires "I am thirsty, could you give me half a glass of water?"
*The pot should thank/compliment the users after a task is completed.
*The pot should display a smiley face then the plant is happy
*The pot should display a watering can when it is thirsty
*The pot should display a sun when it needs more sun
*The pot should display a fire when it needs more shade
*The pot should have flash blue lights when it is thirsty
*The pot should flash yellow lights when it needs sunlight
*The pot should flash red lights when it needs shade
*The pot should alarm the user when the batteries are nearly empty
*The pot should be easy to set up and install


*Debug the code
===Constraints===
*The electronics and the housing cannot be too big so that the pot becomes unpractically big
*The assembly of the pot cannot take more than a week to fit our 7-week planning
*The components cannot be too expensive since we are on a uni-bound budget
*The pot cannot be too big in order to fit the manufacturing process due to the limited 3D printer size available to us.


*Perfectionalize the hardware  
=Electrical components=
==Electrical circuits==
A design for the electrical circuit was made in the first phases of the designing process, See figure 1. When definite decisions about the hardware were made, a second reviewed schema was drawn, see figure 2.


*Finalize preparations for the experiment
[[File:circuit1fleur.png|center|800px||thumb|Figure 1: 1st design of electrical circuit]]
[[File:circuit2fleur.png|center|800px||thumb|Figure 2: 2nd design of electrical circuit]]


*Finish all the wikistuff
==BoM==


{| border=1 style="border-collapse: collapse;" cellpadding = 2  
{| border=1 style="border-collapse: collapse;" cellpadding = 2  
! Name
! Component
! Total hours
! Costs
! Tasks
! Amount
! Total costs
! Link to webshop
|-
|-
| Marijn
| Earth Unit
| hours
| € 4,-
| tasks
| 1
| € 4,-
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/unit/m5stack-earth-unit
|-
|-
| Bert
| Light Unit
| hours
| € 4,-
| tasks
| 1
| € 4,-
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/unit/m5stack-light-unit
|-
|-
| Nando
| M5STACK M5Core Gray - ESP32 Development Kit
| hours
| € 30,-
| tasks
| 1
| € 30,-
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/m5core/m5stack-m5core-gray-esp32-development-kit
|-
|-
| Dorien
| DuPont Jumper wires Male-Female
| Hours
| € 0,75
| tasks
| 2
|}
| € 1,50
 
| https://www.tinytronics.nl/shop/nl/kabels/prototype-draden/dupont-jumper-draad-male-female-20cm-10-draden
==Week 7==
 
*Test week -> monitor the experiment (one contact person per carehouse)
 
*Orden and finalize the cstwiki (the others)
 
*Start working on the final presentation
 
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
|-
| Marijn
| M5Stack NeoPixel LED strip
| hours
| € 10,49
| tasks
| 1
| € 10,49
| https://www.conrad.nl/p/makerfactory-m5stack-neopixel-strip-mf-6324774-led-lamp-met-connectoren-malefemale-35-v-23-cm-na-tape-cut-2108258
|-
|-
| Bert
| Material 3D printed pot and box
| hours
| € 17,50
| tasks
| 1
|-
| € 17,50
| Nando
| https://www.filamenten3d.nl/product/pla-filament-hotorange3d/
| hours
| tasks
|-
| Dorien
| Hours
| tasks
|}
|}


==Week 8==
In the prototype, the wires were not connected correctly. This problem can easily be solved by adding an M5STACK 1-6 PaHub Unit. This unit costs around 6 euros and one of them is required for each design. This will end up with a final price of € 67.49 For every ‘Fleur’. In this project we made two prototypes, the final amount of money used for this course is, therefore, € 134.98.


*Gather data from the experiments at the carehouses
=Software=
The first thing Fleur will do when she wakes up is checking her values from the sensors. She will check the humidity value is in above a certain threshold of humidity and check whether the light sensor detects a certain value within the right range.


*Process the data to a report for the wiki
If everything is alright, the screen will show thumbs-up and the text that she is doing alright. She will then be put in a rest-situation and wait for half an hour for the next check. The time delay of thirty minutes was chosen, because if Fleur asks for attention more regular she would be very irritating. However, if the caretakers and the clients didn’t notice Fleur asking for anything and the system would wait any longer, it could be harmful.


*Include in final presentation
Considering the situation that during the check anything irregular would occur, like the plant needs water, or it wants more or less sun, Fleur will ask for attention by singing a certain tone and shine red LED-light. Depending on the situation, the screen will print the exact question the system has and a corresponding picture. In the case that the plant needs water, the screen shows a droplet-symbol. In case of the need for sun, a sun-symbol will be shown and if the plant wants shadow, a cloud-symbol will be visible. Moreover the combination ‘more-sun-more-water’ and ‘less-sun-more-water’ are situations the system can ask for.


*Start making the demo
The symbols and question for the needs of the plant will be visible until the system detects that the plant has been given the proper attention. Therefore after helping Fleur (or if the user wants a direct update of the current situation), the most-left button should be pressed. By pressing that most-left button, the system will do an instant quick check of the sensors.


{| border=1 style="border-collapse: collapse;" cellpadding = 2
At night, the system can be put manually to deep-sleep mode for 12 hours by pressing the middle and right-most button simultaneously. This is chosen because this way the system will not go to sleep-mode accidently for 12 hours.
! Name
! Total hours
! Tasks
|-
| Marijn
| hours
| tasks
|-
| Bert
| hours
| tasks
|-
| Nando
| hours
| tasks
|-
| Dorien
| Hours
| tasks
|}


==Week 9==
Below a flowchart of the code is drawn for a better overview of the code.


*Finalize the cstwiki (all)
The full final code (in a word document) can be found using the following link: https://drive.google.com/drive/folders/1F2kOWIv5RVl4_EYyO0mUUrJ0aGCaT1-m


*Finalize the final presentation / demo (all)
===Flowchart of the code===


{| border=1 style="border-collapse: collapse;" cellpadding = 2
[[File:flowchartfleur.jpeg|center|700px]]
! Name
! Total hours
! Tasks
|-
| Marijn
| hours
| tasks
|-
| Bert
| hours
| tasks
|-
| Nando
| hours
| tasks
|-
| Dorien
| Hours
| tasks
|}


=Approach=
=3D-printing=
In order to achieve the goals and milestones, a good approach need to be made and followed. x% of the people born everyday, is born with a mental disability like Down Syndrome [source]. A lot of those people live in care homes where they are loved and taken care off by the caretakers. Though the mental disabled live in a care home because they cannot live independently, it brings great satisfaction to be as independent as possible [source], and thus we designed a tool that helps them with that.


Our system will be placed in a plant pot, in the ground of the plant and on top. It will detect whether the plant needs water or whether it needs to be placed in the sun or if it needs shade. When it detects it needs those changes, in other words when the plant needs to be taken care of, the system will ask for this.  
When the idea of FLEUR came to enhance the joy of life of mentally disabled people, some challenges had to be overcome in the design phase of the prototype. As can be read in the section about the conversation that was held with a caretaker, all the wires have to be hidden away. Apparently, these wires are an incentive for the patients to pull on them, this may lead to dangerous situations. Besides this, there was a constraint for the size of the product. The size could give problems during manufacturing but the product can also become too large to be practical in use. There were many more challenges to overcome, these can be read below.  


To achieve our goals, we first need to read ourselves into the subject. Literature study is needed to understand the problem we want to make a solution for; for whom exactly we are making the system and what it needs to be capable of. Therefore a USEr analysis needs to be made. This reflects on our solution to the problem from the perspective of the user (U), how it will benefit the society (S), and how it will be realistic from and beneficial for the enterprise (E). Also an RPC (requirements, preferences, constraints) list for the system and a list of user requirements need to be made.  
==Making the prototype housing==
When it came to deciding on how we would make the prototype, a decision was made quite quickly. The method of 3D printing was chosen. This was a feasible solution since one group member owns a 3D printer and thus it was very forgiving in lead/shipping times. And when problems would start to arise, this was a process that could be done at the university.  
For the whole process, a 3D design of the pot had to be made, this process can be read below, and also research had to be done on the plastics that were going to be used for the FDM printer. After the print was completed some post-processing had to be done before FLEUR was ready to be assembled.


Parallel to that, we need to think about the technical side of our system. Research about the components needs to be done, as well as a circuit model, the software of the system and the 3D-printed plant pot. When the components are arrived, the system will be built and the software will be uploaded to make sure the system works like we imagined beforehand.


Because of the fact we are designing a solution to a problem that involved mental disables people and their caretakers, the best research, next to literature study, would be to hear it exact form the people involved. Via contacts, an appointment for an interview will be made with a caretaker for more understanding of the problem and to get feedback on more useful functions of our plant pot system, as well as to remove unnecessary parts. Also we need to test our system in the real world. Therefore, in the meantime the experiment must be prepared and executed on time.
===Research on plastics===
When doing research on the plastics there were only 3 possible solutions for the printer set-up at hand. Some plastics had to be discarded since they would be too abrasive, some were discarded due to their properties after printing, some were discarded if the manufacturing process could not be met, there is a limit to the temperature the printer can reach, and some were discarded due to the fact of limited to no stock being available.
What plastics remained? The 3 most common 3D printer plastics on the market: PLA, PET-G and ABS. They all have their own strengths and weaknesses and these will be elaborated on further.


=Goals=
'''PLA [20]'''


To make a successful project that can be shown to be successful, we need to define clear measurable goals and a way to test them.
PLA is the most commonly used 3D printer filament due to its versatility. PLA is easy to print since it does not tend to warp1 and/or cause stringing2 during printing and it is relatively strong, it is available in many colours and it is very easy to work with during post processing. It also does not require high temperatures during printing. And one other side benefit is that PLA is biodegradable.
On the other hand, PLA is not the strongest material on the market, but this is not that much of a concern for our project. What is of concern are the properties PLA has when it is in contact with sunlight and water. Since PLA is a bioplastic it is not hydrophobic for longer periods of time nor can it be in direct sunlight for longer periods of time. This seems catastrophic but while doing the research it was found that 'for longer periods of time' means more than 2-3 months. For this project the use will be around 1-2 weeks at most. Lastly it is needed to mention that PLA deforms at not the highest temperature, ~50-60C, it will not melt but the when applying pressure indentations and/or layer separation could occur.


'''Our main goal''' is to add something to the daily lives of people with DS. We want to give them a way to spend their time, and give them something to care for. Interacting and caring for the plant should be a hobby, something that they enjoy doing and spending time on. This is a beautiful idealistic goal that improves the wellbeing of these people and can therefore be marketed as a healthcare product that could even be covered by healthcare insurance.


This can be measured by keeping track of how much time is spent interacting with our pot compared to a control plant that does not have our systems attached to it. Secondly, we can question the users about their overall experience with our product. We do this by asking the users to rate individual aspects of this product on a 5 point scale as an improvement over normal plants? This way we get a quantitative measure of what our system adds to the weekly routine (time and enjoyment wise).   
'''PET-G [20]'''


'''Our second goal''' is to improve the independence of the users with DS and teach them how to care for something. Our product provides routine and clear simple instruction. This will help the people with DS to take care of the plants themselves without any external help from caretakers. This improves their independence which is a trait that is heavily valued by the caretakers we interviewed. When these people become more independent they require less care and gain more freedom, which improves their quality of life. Secondly, this product will develop the skill to care for something. This is a useful skill for people who need care. If you teach these people basic caring skills they can help themselves and each other better.
PET-G is the little brother of the engineering plastic PET, PET is used for example in water bottles. PET-G is a ductile material, it is a hydrophobic material by itself, this does not mean that the print will be waterproof however, it has a good resistance to sunlight, it is relatively easy to print and it starts deforming at a temperature of ~70-75C.
Some disadvantages are that PET-G is prone to cause stringing during printing and it is more inclined to warp than PLA, but these are minor issues with PET-G. The biggest problems with this plastic were two fold. The first major problem was availability, the source that was used to acquire the plastic only had 1 roll in stock and we needed 2. The second problem had to do with the print bed that was being used. The print bed is made of glass with a special coating, while printing there is a significant chance that the PET-G could fuse with the glass of the print bed. A solution would be a PEI sheet for the printbed but this could not be acquired in time.


Testing the increase in independence and caring skills from 1 week of usages will be difficult since changes are expected to be small and these characteristics are not so simple to measure. Hence this will probably be assessed by the caretakers who will be present during the testing stage.


'''Our third goal''' is to remove some workload from the caretakers. We know that it is not always easy to work in the (health)care sector and especially with the covid-19 situation the pressure on these people is high. If our product manages to independently keep the people with DS occupied, it will mean more free time for the caretakers to spend on others work or just relax a bit so this goal ties in with the second goal.
'''ABS [20]'''


In general, is ABS the most ductile material of the 3. ABS is also very heat resistant, it starts deforming at a temperature of ~100C. But there are some major disadvantages. First of all, ABS is not the most resistant to UV light, in this aspect it has about the same properties as PLA. But the biggest drawback to ABS is its tendency to expanding and/or contracting during printing. This means that the print is not only very inaccurate, the tolerances are not met due to the expanding/contracting of the material, but it is also hard to make 2 3D printed parts that would need to interact with each other.


This can be tested by comparing the time a caretaker spends on helping these people take care of normal plants VS the time spent installing and explaining our product. If our product proves to be too complicated to use, we can get feedback from the caretakers that it took too much time and energy to adapt to the new system and that it was not as independent as we had hoped. 
'''Conclusion'''


'''Our fourth and least important goal''' is to improve the health of the plants. Having healthy plants benefit the air quality and the overall look of a space [SOURCES]. Secondly it is nice if the care institution has to less regularly buy new plants, this saves time and money (which are already scarce resources).  
So what material was chosen to use for the 3D printing? The answer is PLA. It was readily available, it does not have the best properties but also not the worst. The only thing that might be a small concern is that it can deform at around 60C, this would be a problem when the pot is placed above a radiator of the central heating system when it is cranking out a lot of heat. But since the prototype is made during late spring/ early summer this would not be a problem. Also, since this project will use the pot for 1-2 weeks, it is no problem that the pot will start to break down after 2-3 months in continuous sunlight or being used as a water reservoir for that amount of time.  


This can be tested by starting off with two plants of the same type and health. One will be the control plant and the other will be planted in our pot. Both will be placed in the care home. After the testing period, the health of both plants will be assed. We do realise that assessing plant health is a bit subjective and that the sample size is really low, but we have to make do with what we can do in the restricted time and budget.
''1) Warping is the tendency of a material to deform when it is being cooled. This can lead to structural inaccuracies, parts not being able to merge together for example.''
It is also interesting to note that a smart pot that improves plant health is also an interesting product for the agricultural sector and greenhouse industry, seeing how dutch farmers need to produce with high efficiency to compete in the market because of the high prices for ground.


=Experiment=
''2) Stringing can happen with certain 3D printers during printing. Thin lines of plastic are dragged across the part during manufacturing resulting in an end result that needs more post-processing in order to get a nice finish.''


To test whether our smart pot achieves the stated goal we will perform two simultaneous tests that are one week long. For each test, we will need two similar plants that are in similar health.
===Post processing===
The plant that we have chosen for this experiment is a tulip with a bulb. This was done because 1) they are available in this spring period. 2) They are flowers so we expect them to show relatively large changes over the short testing period of one week. 3) Because they are flowers we hope that the caretakers and the clients like them. 4) The blub prolongs the life of the tulips compared to cut flowers. This way we want to prevent the tulips from dying naturally within a week. 5) Because of the bulb we can plant the tulips into the dirt. Otherwise, it would have been a smart vase, which makes the needs for a moisture sensor obsolete. 6) bulb-in-pots need a bit of water once or twice a week. So the clients actually need to water the plants within that week. 7) Tulips require sunlight but not full sun. This is a bit more interesting in terms of programming our software and using the sensors.  
After a print is complete, it is likely that some post-processing has to be done. In our case this meant removing the support material, doing some finishing to the pot and making the pot waterproof. These processes are elaborated on below.


In the experiment, one plant will be placed in a regular pot and will serve as a control. The other plant will be placed in our smart pot. Both plants will then be placed in similar environments (with the same temperature and amount of light) but in different locations (as to not trigger care for the control plant by association with the smart plant). Then the caretakers will introduce the people with DS to the plants and the smart pot and tell them that they have to care for these plants during that week. The caretakers also mention that one plant is a magical talking plant and that it can communicate if it needs something so that the clients will not be scared or too confused.
'''Removing the support material'''


We know that one week is a very short time span and that a sample size of N=2 is small but we have to work with what we have. After the test period, we will assess the health of both plants to see if one is in better health than the other, suggesting the smart plant influenced the wellbeing of the plant.  
When making a print like this it is important for the person managing the 3D printer to keep the orientation of the parts in mind in the slicer software. This can in turn greatly reduce or increase the amount of support material that has to be printed. Support material is sacrificial plastic that is used to make sure that the print can be made by the printer, this then can be easily broken off in the post-processing phase. In general this support material can be avoided by making some smart design choices as well. A 60 degree overhang for example is the most aggressive form that most printers can handle without printing any support material. This step is crucial in minimizing the amount of plastic that is used and in keeping the print time as low as possible.
Due to the situation with Covid-19 we are not allowed to enter the care-houses in person. And due to the mental vulnerability of the clients, their privacy, and the fact that we are strangers to them, we are not allowed to set up a webcam feed to more scientifically measure some parameters like: time spent with the plant.  
Therefore we will gather results by questioning the caretakers (and the clients indirectly).
The results from the two parallel tests will be combined, paying attention to any possibly interesting similarities and differences. From these combined results we will be able to judge whether our product achieved the goals we set for it, and what still needs improvement.


=Hypothesis=
'''Finishing'''
We expected that we will achieve our main goal of helping people with Down syndrome to have more ways to spend their time in a joyful manner, that is why we decided on this design. We are fairly confident we will reach this prioritized goal when the design experiences no malfunctions during the testing period. This concretely means that the caretakers will rate the “time spend” and “enjoyment”  in the questionnaire higher for our smart pot than for the control plant.
Our second goal is to take some workload from the caretakers. For this, we expected a negative result but that is due to an unresolvable flaw in the design of the experiment. We hypothesize that the installation process adds extra workload, and so does the becoming accustomed to using the product. We expect that the clients will need some time and guidance from the caretakers when using the smart pot for the first few times.
However, we do expect the workload to drop after the product has been fully integrated. Therefore we will also ask the caretakers if they foresee a reduction in workload if the smart pot were to be used longer than a week, say a month. For this, we do expect a positive answer, at least for the client who possess the necessary intellectual capabilities to learn and remember some new skills.
Our third goal is to help the client to become more independent and caring. We expect that these characteristics will be hard to measure with such a small sample size and test time. But we might be wrong. It could also be the same that some clients quickly develop a caring fondness for the talking tulip (POSSIBLE NAME?). This again will have to be rated by the caretakers.
We expected to measure some degree of increased independence. An increase in independence is defined as a report by the caretaker that the clients get activated by our system to perform a task that they had forgotten in the control plant.
Our final goal was to improve the health of the tulip. For this, we expect an inconclusive result. We think that there will be no significant change between the control plant and the smart pot in one week, even if the control plant gets completely forgotten. On the other hand, it could also be the case that our plant model is not ideal or if the instructions aren't followed carefully enough by the client. Which may lead to drowning the smart pot tulip whilst the control plant lives.


=Email with questionnaire for hypothetical use=
Now that the support material has been removed, the tedious work of finishing the parts begins. In general, a 3D printed part is quite smooth and has a nice look to it, but there can be some oozing on the side or the seam is visible to the outside. These are both the effect of the way an FDM printer works. Since the printer works in layers, the starting/end point of a layer gets over extruded plastic, or a seam, this can be filed down and sanded to match the rest of the print.


Beste meneer/mevrouw,
'''Waterproofing.'''


Wij zijn een project groep aan de technische universiteit Eindhoven die bezig is met het ontwikkelen van een slimme plantenpot voor mensen met een verstandelijke beperking. Ons systeem moet het verzorgen van een plantje eenvoudiger en leuker maken om zo de dagbesteding en zelfstandigheid van deze mensen positief te beïnvloeden. Om tot het beste ontwerp te komen zijn wij meningen aan het verzamelen van mensen met ervaring in het vakgebied.
The last process would be waterproofing. Unlike some test prints, the pots were not completely waterproof. This was fixed by using a 2 part epoxy, this would ensure that the flower pot would not leak.
Wij zouden enorm geholpen zijn als u kort uw mening zou willen geven over ons concept. In de bijlage vind u een korte beschrijving van ons systeem en 4 stellingen waar u een mening dient te omcirkelen, dit alles zal maar 5 tot 10 minuten duren. De antwoorden zullen alleen gebruikt worden ter sturing van het ontwerp proces en we zijn niet geïnteresseerd in persoonlijke gegevens van wat voor vorm dan ook.
Als u vragen heeft of meer wilt weten over ons concept beantwoord ik ze graag.  


Alvast bedankt en met vriendelijk groet,
==Designing the prototype housing==
===First design===
When coming up with a design the first thought was to make a flower pot comprising of 2 compartments, 1 compartment for the electronics and 1 for the plant, see Figure 3. The idea was that the bottom compartment would be filled with all the electronics and the top compartment would function as a flower pot. The moisture sensor would stick up into the flower put and the light sensor would be sticking out of one of the compartments in order to sense light. In the end it was thought to be too difficult to make the flower pot water tight with a sensor sticking in from the bottom. This could be avoided with a designated rubber seal, but then still it would not be an ideal solution. Another hinderance with this design was its size, it would only have a couple of mm of clearance during manufacturing.
[[File:WhatsApp Image 2021-05-06 at 16.55.32.jpeg|400px||none|thumb|Figure 3: First design implementation.]]


Namens de gehele project groep,
===Second design===


Marijn Borghouts
Learning from the design faults in the first iteration of the design sketch, a new concept was thought of. The main concept would remain the same, there would be 2 compartments. 1 compartment for the electronics and 1 compartment for the plant. The main difference between the first and second iteration of the design lies in the way how these compartments interact. Instead of making a sort of lid on a jar concept, the compartments would be 'merging' together. As can be seen in Figure 7. The 2 compartments for the design will be explained separately. This design was also used for the 1st prototype of FLEUR, during assembly of this prototype some minor design changes were made for the 2nd prototype.


==Bijlage==
===The top compartment.===


Deze bijlage bevat een korte uitleg over ons concept, opgevolgd door een vragenlijst met slechts 4 stellingen en wat ruimte voor algemene opmerkingen.


'''Ons concept'''
The top compartment of the design has multiple functions, it has to hold the plant, it holds the sensors, the LED strip and it makes sure that the least amount of water can get to the bottom compartment. The design can be seen in Figure 4.
Planten in huis zorgen voor een leuk aanzicht en voor frisse lucht. Daarnaast kan het verzorgen van planten voor mensen met een verstandelijke beperking goed zijn voor het ontwikkelen van een zorgzaam karakter en het leren volgen van tijdsgebonden routine. Aangezien een plant in een potje met enige regelmaat water nodig heeft.
In order to hold a plant and to make the design waterproof was quite challenging since the chosen manufacturing process was a 3D printer. When looking online how it could be done with the settings in the slicer software an article was found by a company called Prusa Research[XX], a leader in consumer 3D printers. This article stated that it would be possible with certain parameters but even then all the stars would have to align. When these parameters were changed, the end result was that the print was not waterproof. In the end, it had to be done during post-processing. As far as holding the plant itself was quite simple, a plastic flower pot from a retailer was used as an insert into the compartment, this way there would be an extra layer of protection between the electronics and the water. This also has the added benefit that changing a plant is a simple process, the inserted pot has regular dimensions, meaning that plants in similar pots can be found at retailers. But this is not necessary, some soil can be put in the compartment for the flower and FLEUR would still function as intended.
Ons ontwerp beoogt deze positieve effecten van het verzorgen van planten te behouden terwijl het eventuele drempels uit de weg neemt.  
For the sensors, cut-outs have been made. For the light sensor, a cut-out in the top was made so it can sense the amount of light. The placement is opposite to the screen, this was done for ease, the sensor would be able to sense sunlight through a window and then the screen would still be pointing towards the room. For the moisture sensor, a cut-out had to be made through the potholder. This gives the risk of compromising the waterproofing but this compromise had to be taken. As mentioned during design 1, all the cables had to be out of sight whilst trying to avoid making any holes in the bottom of the potholder. Thus it was chosen to make the hole in the side of the potholder, and the hole is placed under a 30-degree angle. The thought process being that the water on the sensor itself would follow the path of least resistance and pointing the sensor down would lead the water down giving the least amount of problems. The holes for the sensors are meant to be press fits, meaning that no adhesives or fasteners will be used. This is why they are designed to be as big as the dimensions of the sensors, with the tolerance clearance for the printer being ignored, this gives a hole that is slightly smaller than the sensor(+- 0.2mm) giving the chance to make the fit perfect with some files. If the fit turns out to be too loose, a piece of tape will be used as a gasket. Ideally, a rubber O-ring would be used but that is not feasible, unfortunately.
Daarom hebben wij een slimme plantenpot ontworpen. Deze pot houdt met sensoren de vochtigheid van de grond bij en de hoeveelheid zonlicht die er op de pot schijnt. Aan de hand van deze gegevens bepaalt de pot zelf wanneer het tijd is om de plant die er in zit water te geven of wanneer deze in of uit de zon moet.  
Besides the sensors, also a designated spot has been chosen for the LED strip, this is a simple track in which this strip can be placed.


De pot doet dit door op een vriendelijke en positieve manier te communiceren met zijn omgeving. De pot beschikt over een speaker, led-lampjes, en een schermpje om zo op verschillende manier de aandacht van iemand in zijn omgeving te trekken. De pot zal dus bijvoorbeeld hardop zeggen dat hij dorst heeft en graag een beetje water wil. Daarbij knipperen er dan blauwe lampjes en is het symbool van een gieter te zien op de pot.
[[File:fig2.png|400px||none|thumb|Figure 4: Top compartment second design]]
Doordat de pot duidelijke korte commando’s geeft en daarna de gebruiker bedankt bij een volbrachte taak hopen wij betrokkenheid en plezier bij de verzorging te vergroten, en de persoon in kwestie zelfstandiger te maken. Aangezien de slimme pot zelf de gebruiker aanstuurt zou dit een klein deel van de werkdruk op de verzorgers kunnen wegnemen.  


Article Prusa research: https://help.prusa3d.com/en/article/watertight-prints_112324


'''Vragenlijst'''
===The bottom compartment===
The bottom compartment needed to hold the M5Stack Core along with the powerbank and all the cables. And it had to give strength to the whole design. The design can be seen in Figure 5
When it came to holding the Core several cut-outs were made in a wall of the bottom compartment. Some cut-outs held the Core in place whilst others were there to accommodate for the cables that needed to be connected to the Core. in order to hold the screen in place, there is also a design feature at the back. This is a slot that fits around the BUS unit that is directly connected to the Core, this will neutralise movements in the horizontal-plane. Limitations in the vertical-direction are achieved by a combination of these cut-outs and this design feature. These can be seen in Figure 6.
There is enough room to accommodate 1 of the 2 power banks that were used during the design process, there is no particular orientation that these need to have.


Bij elke stelling dient u één antwoord wat van toepassing is te omcirkelen. Daarnaast is er open ruimte om uw menig te geven of uw antwoordt toe te lichten. Alle feedback is welkom, ook kritische uiteraard. We hebben liever te veel dan te weinig informatie dus wees niet terughoudend. 
[[File:fig3.png|400px||none|thumb|Figure 5: Bottom compartment second design]]
[[File:fig4.png|400px||none|thumb|Figure 6: Bottom compartment second design, showing the cut-outs for the Core and all the wiring]]


'''Stelling 1)'''
===Put together===


Ik zie de voordelen (zelfstandigheid, dagbesteding, zorgzaamheid) van een slimme pot voor de cliënten in mijn instelling.  
When both compartments are put together, there are 2 prongs in the top compartment and there are 2 holes in the bottom compartment. These holes and prongs limit the movement in the horizontal-plane, movement in the vertical direction will still be possible however, this was done to make it easy to charge the powerbanks if needed and to do repairs.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
[[File:fig5.png|400px||none|thumb|Figure 7: Second design put together]]
[[File:fig6.png|400px||none|thumb|Figure 8: 1st prototype]]
[[File:fig7.png|400px||none|thumb|Figure 9: 2nd prototype]]


Open ruimte voor uw mening over de voordelen)
===The prototypes===
Also, 2 prototypes were made. One in white, the first prototype, and one in red, the second prototype. There are small changes between the 2, when putting prototype one together some minor mistakes were found in the design and these were changed for prototype 2. These changes were the length of the track for the LED strip and the height of the design feature for holding the BUS unit of the Core.


=Promo Video=


'''Stelling 2)'''
A promotion video was made in Kickstarter style. This video is useful for the final presentation, to convince the target audience that they needed to test our prototype, and to buy our product (''enterprise''). This video needs to be very short <100 seconds. Otherwise, people lose their attention. The video should clearly show what our product is, what it does, and how it looks.


Ik denk dat mijn cliënten meer tijd zouden besteden met een slimme pot dan met een normaal plantje.  
As an example, you could look to nearly every IndieGoGo/Kickstarter video. The following guide for making a video was found online:


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


Open ruimte voor uw mening over de besteedde tijd)
'''The hook'''


Your Kickstarter videos have to get their attention. If you don’t do this, nothing else matters. This could be through the video title or those first few impactful seconds that draw the person in to learn more.




'''Stelling 3)'''
'''Tell a memorable story'''


Ik verwacht dat mijn cliënten de slimme plantenpot in de benoemde vorm zelfstandig(er) kunnen verzorgen dan een normaal plantje.  
Your video should tell a story. If you are trying to get funding for something that solves a problem. The problem should be demonstrated through a visual narrative. Stories hold attention. They show rather than tell. People want to find out what will happen next. Work the narrative to hold attention to the very end. And after the viewer walks away, they should be left with an imprint, an inability to forget what they just saw, and hopefully and urge to share.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


Open ruimte voor uw mening over zelfstandigheid)
'''Get people excited'''


Yes, you are very excited about the movie for which you need funding, but is this excitement translating to someone who knows nothing about you. What is unique and special about your idea? Why should the contributor want to be a part of your mission? And don’t underestimate the power of music to inspire excitement.




'''Stelling 4)'''
'''Make sure visuals match the script'''


Ik verwacht dat mijn cliënten meer plezier ervaren in het verzorgen van een plantje als deze een stem heeft een positieve feedback geeft.
If you reference a mouldy cheeseburger in the script for some strange reason, we need to see one. The visuals need to synch to what the actors are saying to reinforce your message.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


Open ruimte voor uw mening over het gebruiksplezier)
'''Don’t over-explain it'''


You don’t want to be too vague. People should know what they are funding and need to know that you have a plan. But a lengthy video that explains every detail of the process will not serve you well. The most successful videos are concise 2-3 minutes.




'''Afsluitende vraag)'''
Our video can be viewed on youtube via this link https://youtu.be/aYFWqo6niwQ


Eerst willen we u nogmaals bedanken voor uw tijd en mening.
=The test=
Als laatste willen wij u vragen of u eventueel interesse heeft om een eerste prototype van dit ontwerp (gehaal gratis) gedurende een week uit te testen.
'''Finding test locations'''
JA // NEE


Als dat het geval is kunnen we hier nog nader contact over hebben.  
In order to test our 2 prototypes we needed two care institutions who were willing to test our product. This was hard since the caretakers are generally very protective of their clients. Covid-19 probably also played a role. We as students are statistically the most infected part of the population. Getting a corona infection inside a place filled with disabled people would be terrible. But eventually, 2 respondents from our general questionnaire agreed to test Fleur. After this, a phonecall was setup to discuss practical details and to make sure that these people knew what was going to happen and what we expected from them. Below is the contact information for the persons that agreed to test Fleur.  
Uw antwoorden en eventuele vragen kunt u terug sturen naar dit e-mailadres (m.m.borghouts@student.tue.nl)


Met vriendelijke groet,
''We will not post the contact information on this wikipedia page since we do not have their explicit permission to do so and it will be an invasion of the privacy of the people who were so willing to help us.''


Marijn Borghouts
==Experiment==


To test whether our smart pot achieves the stated goal we will perform two simultaneous tests that are one week long. For each test, we will need two similar plants that are in similar health. The plant that we have chosen for this experiment is a tulip with a bulb. This was done because 1) they are available in this spring period. 2) They are flowers so we expect them to show relatively large changes over the short testing period of one week, e.g. they will hopefully bloom 3) Because they are flowers we hope that the caretakers and the clients like them. 4) The blub prolongs the life of the tulips compared to cut flowers. This way we want to prevent the tulips from dying naturally within a week. 5) bulb-in-pots need a bit of water once or twice a week. So the clients actually need to water the plants within that week. 6) Tulips require sunlight but not full sun. This is a bit more interesting in terms of programming our software and using the sensors.


==Results of the questionnaire==
In the experiment, one plant will be placed in a regular pot and will serve as a control. The other plant will be placed in our smart pot. Both plants will then be placed in similar environments, with the same temperature and amount of light, but in different locations (as to not trigger care for the control plant by association with the smart plant). Then the caretakers will introduce the people with DS to the plants and the smart pot and tell them that they have to care for these plants during that week. The caretakers also mention that one plant is a magical talking plant and that it can communicate if it needs something so that the clients will not be scared or too confused.
This questionnaire was sent out as an email on Thursday the 13th of May to 13 new, not yet approached, care institutions that were located in Brabant or Limburg. Unfortunately, I immediately got an automated reply that said that one of the persons I was trying to contact was on holiday. That was when we realized that our mails had been sent in the May holiday and that there was a chance that our mail would be far down in the recipient's inbox by the time somebody starts working again.  
We decided to wait until Wednesday the 19th to see if we would get a reaction. Unfortunately, we did not receive a single one. So on that Wednesday morning, I decided to call as many institutions as I had time for. In total, we were able to tell our story to XX people, of which XX were interested in replying to us. We also resent the email to the remaining XX institution that did not have a phone number.


We know that one week is a very short time span and that a sample size of just 2 plants is small but we have to work with what we have. After the test period, we will assess the health of both plants to see if one is in better health than the other, suggesting the smart plant influenced the wellbeing of the plant. Due to the situation with Covid-19 we are not allowed to enter the care-houses in person. And due to the mental vulnerability of the clients, their privacy, and the fact that we are strangers to them, we are not allowed to set up a webcam feed to more scientifically measure some parameters like: time spent with the plant. Therefore we will gather results by questioning the caretakers (and the clients indirectly). The results from the two parallel tests will be combined while paying attention to any possibly interesting similarities and differences. From these combined results we will be able to judge whether our product achieved the goals we set for it, and what still needs to be improved.


For '''Kern''' I could not find a phone number. But I did find another email address tineke.eulderink@onsbrabantnet.nl which I then also mailed.
==Hypothesis==
We expected that we will achieve our main goal of helping people with Down syndrome to have more ways to spend their time in a joyful manner, that is why we decided on this design. We are fairly confident we will reach this prioritized goal when the design experiences no malfunctions during the testing period. This concretely means that the caretakers will rate the “time spend” and “enjoyment” in the questionnaire higher for our smart pot than for the control plant.  


Our second goal is to take some workload from the caretakers. For this, we expected a negative result but that is due to an unresolvable flaw in the design of the experiment. We hypothesize that the installation process adds extra workload, and so does the becoming accustomed to using the product. We expect that the clients will need some time and guidance from the caretakers when using the smart pot for the first few times. However, we do expect the workload to drop after the product has been fully integrated. Therefore we will also ask the caretakers if they foresee a reduction in workload if the smart pot were to be used longer than a week, say a month. For this, we do expect a positive answer.


When I called '''Cello''' I got connected to a friendly woman who was willing to help me. Unfortunately, she did not have any experience with mentally disabled people herself. After I told her about FLEUR she told me Cello has an innovation branch, of which the manager is called “Wilma aan den toorn”. The woman I spoke to could not find her number but she gave me the number of the reception. So that they perhaps could help me. [I could always call back her if I had more questions]
Our third goal is to help the client become more independent and caring. We expect that these characteristics will be hard to measure with such a small sample size and test time. But we might be wrong. It could also be the same that some clients quickly develop a caring fondness for FLEUR. This again will have to be rated by the caretakers. We expected to measure some degree of increased independence. An increase in independence is defined as a report by the caretaker that the clients get activated by our system to perform a task that they had forgotten in the control plant.  
The reception told me that Wilma does not work for cello anymore and that they didn’t know of a replacement (but she is still a valuable person we could talk to if we find her number). I was connected to somebody at the “training/education branch” and they connected me with somebody who was concerned with this kind of projects. But she doesn’t work on Wednesdays so I had to call her on another day [06 509 09629] 


Our final goal was to improve the health of the tulip. For this, we expect an inconclusive result. We think that there will be no significant change between the control plant and the smart pot in one week, even if the control plant gets no care at all. On the other hand, it could also be the case that our plant model is not ideal or if the instructions aren't followed carefully enough by the client. Which may lead to drowning the smart pot tulip whilst the control plant lives.


When I called '''ASVZ''' I got connected to the reception. They connected me to Corien, the manager,  but I got her voicemail which said so would try to call me back. I also found a section about “zorgtechnologie op maat” on their website and a email of the two woman who ran the that project. tdekker@asvz.nl so I mailed her as well
==Execution==
https://www.asvz.nl/actueel/zorgtechnologie-op-maat/


The two prototypes were placed at the test locations on Monday. We gave the instructions to the caretakers to observe changes in behavior of the clients. Everyone was exited for the experiment.


When I called '''Ketalis''' I learned that they do not have the mentally disabled people that we are looking for. Ketalis focuses on helping children with a language impairment and children who are (nearly) deaf. This is not what we are looking for so this is a dead end.  
The manual of Fleur and the questionaire we prepared to give the caretakers afterwards will be posted in appendix D.


==Review of the experiment==


When I called '''Daelzicht''' I got the phone number of Marloe Collart [06 10961267] she is the communication advisor and she would know who I would need to call. But Marloe did not pickup the phone ☹.  
The two prototypes were placed at the test locations on a Monday. We instructed the caretakers to observe changes in the behaviour of the clients. Everyone was excited about the experiment.
Unfortunately, the prototype in Veldhoven stopped working after two days due to a problem with the battery/power.
Most probably the power bank stopped working, perhaps because of the heat that week which took more power from the power bank than it would have done in a regular week, or maybe there was still a bug in the system which drained the power. The caretakers did not have the correct charger cables to charge the power bank.


The prototype in Roosendaal stopped working after three of the five days. The problem was easily resolved by rebooting the system. But the caretaker in Roosendaal did not understand what I was trying to explain to her. Unfortunately, Roosendaal is too far for us to fix it ourselves. Because of this short testing time, we decided to not use our questionnaire to gather the feedback of the testing week but decided to have a more informal chat at the end of the week.


When I called '''SDW''' I was told that my best bet would be sending a mail to bmobs@sdwzorg.nl and asking if there are any work-groups that cover these kinds of projects and if there are any caretakers who are willing to fill in the questionnaire. So that is what I did.
Despite the unfortunate circumstances, the prototypes had worked five days together. The first thing we learned from these tests is that the battery/power management was unreliable after a few days. When we retrieved the prototypes a mentally disabled person told us that she had a lot of fun with Fleur. She and the other mentally disabled had laughed a lot and she liked the pot very much. The caretakers themselves told us that they enjoyed the experiment although it ended prematurely. The disabled people spend more time on Fleur than on the other plants. Nearly every time it went off the clients went to check out the plant.
In these 3 days, it was not really possible to measure any significant change in independence or caring behaviour. The health of the plant stayed the same.


In conclusion, the execution of the experiment did not go as planned, and we probably do not have sufficient data to draw a conclusion on whether Fleur is a product to continue assembling. So as expected more testing and development has to be done. But the initial raw data shows that our target group is largely interested in the product and that they at least enjoyed using it. So this is not the end for Fleur.


When I called Miriam van Oorschot from '''Down Vision''' she did not answer the phone.
=Discussion=


During such a project there are always things that could have gone better. Some of these things were anticipated and others were not. This section is dedicated to the things that went suboptimal, and how we would improve a second prototype.


When I called '''Huppetee''', I got redirected to a team of 7 women who formed the caretakers group. https://www.huppeteam.nl/begeleiders of these people I can only find 1 email address and I mailed to her already.
===Target audience===
The first big problem that we encountered had to do with our target audience, namely people with down syndrome. In order to obtain user “preferences and needs” we needed information from these people. Although Down syndrome is not a rare disability (7.7 per 10000 in the Netherlands [21]), we personally do not have contact with anyone suffering from this condition. This is because these people generally have fewer social contacts. So we tried getting in contact with care institutions. This was quite hard since these caretakers told us that they have busy jobs and people generally dislike spending time helping complete strangers when they are busy. Another factor that did not help is that the caretakers are very protective of their clients. Since the clients themselves are not able to properly fend for themselves. When I called these institutions  I was usually redirected a few times until somebody did not answer the phone or said the could help us. Lastly, the coronavirus made it impossible for us to visit these places in real life. This would be a easier way to actual meet the disabled people and their caretakers.
So in another project, we could think of better ways to get into contact with our target group (or decide upon an easier one during the first stages of development).


=Questionnaire after prototype use=
===User-friendliness===
Our system reads out it sensor values every 30 minutes and checks whether those are in range. If they are, it is fine and the system will wait another 30 minutes for the next check. If it is not good if will ask for what it needs, that is water, or more or less sunlight. If it needs help, the user needs to push a button such that it will check every two seconds so that the system can give direct feedback to the user if it is being taken care of.
A clear improvement would be that the user doesn’t have to push a button. This way it will cost the user an action less, which makes the product more user-friendly. An implementation could be that the system will automatically check every two seconds when it detects a problem. We chose not to do this, since it will consume a lot more power and the system needed to work for five days with one power bank.
Another button-improvement would be that the system would automatically go do deep-sleep mode between certain times. The way the prototype is now put to sleep mode is when there are two buttons pressed simultaneously. We chose to do it the button-way because it was way to time consuming to program a timer on it.


The caretakers that we are in contact with prefer a questionnaire in Dutch so that is why this section is written in Dutch. It is important to keep the questionnaire short with only the most vital questions. The caretaker are voluntary helping us by spending their time on using our product and answer our questions. Be do not want to burden them or scare them off. Secondly, we think that it would be better to have few complete and carefully answered vital questions instead of 30 questions that are answered minimally.  
===Goals and experiment===
Another problem we encountered had to do with our goals and experiment. As a goal, we aimed to add a new joyful activity to the day of people with Down syndrome. The main problem here is the measurability of these results. Due to the coronavirus, we could not be present in persons to judge the effectiveness. And due to the privacy of the users, we also could not install camera’s for example to keep track of how the prototype performs. The result of this is that we had to ask the caretakers to pay attention and all the feedback had to come from questioning those caretakers. This is less than desirable because we want to ask as little as possible from these people since they are already being extremely friendly and helpful by testing our product. Secondly, it increases subjectivity in the results since both prototypes are judged by different observers.
This could be solved by perhaps waiting until covid passes or by finding a different target audience that allows us to monitor the experiment ourselves.  


An additional problem of the experiment was the test period length. Due to the structure of this course, we could only permit 1 week of testing. This is really short when you want to monitor potential changes in behaviour and the health of plants. Expected changes are minimal in one week, and therefore the results might be inconclusive. We have no good fix for this.


Beste …,
===Design===
Nogmaals bedankt voor uw medewerking. Afgelopen week hebben u en uw cliënten onze slimme pot getest. Hieronder bevindt zich een korte vragenlijst met 8 stellingen over jullie ervaring met de slimme pot. Het invullen zal ongeveer XX minuten duren. Wij zullen deze resultaten alleen gebruiken om te beoordelen of ons prototype heeft voldaan aan vooraf vastgestelde doelen, en wat er bij een volgende uitvoering eventueel verbetert kan worden. Enkel wij als project groepje en onze supervisors zullen de antwoorden lezen en we zijn niet geïnteresseerd in privé gegevens zoals namen.  
The next thing that we would improve in a new version would be the design of the pot and how the sensors are placed inside. In the current design, the moisture sensor fits into a hole that is halfway down the pot. This was the only way everything would fit in the pot. Making the pot bigger was not an option since we were restricted by the size of the 3d printer and the print time. This low hole caused excess drained water to drip through the hole in the direction of the electronic core. This is obviously a problem. In the prototype, this was fixed by using some tape. But a more ideal permanent solution would be to redesign the pot with a bigger 3d printer. Or by using moisture sensors that are smaller since our model was quick large (8ish cm in length.)
Bij elke stelling dient u één antwoord wat van toepassing is te omcirkelen. Daarnaast is er open ruimte om uw menig te geven of uw antwoordt toe te lichten. Alle feedback is welkom, ook kritische uiteraard. We hebben liever te veel dan te weinig informatie dus wees niet terughoudend.


FLEUR now uses a powerbank as the source of power. We didn’t like to option of having a power cable since that would look less nice and would increase the risk of electrocution because we use electronics inside a flowerpot that is filled with water every week (and see the problem of the hole described above). The downside of using a battery is that you have to swap or charges them once in a while. So to minimize that labour and make our system more durable we should use power-efficient component. In the current design the display of the mstack 5 core uses most of the power, our sensors take a measurement once every thirty minutes and each two seconds after the button is pressed, to direct fast feedback). This power consumption is negligible in comparison. So to improve our design and make it run on smaller and fewer batteries we could swap the standard transmissive display for a so-called reflective display, these are the ones that are used in e-readers. These displays only use energy when the projected image on the screen has to be changed. Which is only a handful of times a day in our case. This would decrease our average power consumption allowing for smaller batteries.


'''Stelling 1)'''
===3D printed design===


De installatie van de slimme pot was een prettige procedure.
The next thing that would need improvement is the design of the pot itself. This can be split in 4 parts: holding the core and the electronics, masking the wiring and placement of the sensors, waterproofing and lastly making the prints. The improvements will be discussed separately.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
When it came to holding the core it was chosen to create a pressure fit within its designated socket. This was a good solution at the time since the core had multiple sockets that needed to be used for the sensors, these needed to be free of the structure. In the first design this gap was too tight and the sockets could not be used. In the second design the sockets could be used but the fit of the core was not ideal. The solution would be to make a structure with precise cut-outs where the cables would connect, make this structure separate from the pot so it can be bolted or screwed to the outside. Then make a second slightly bigger enclosure that fits over this structure to hide the wires. This way a secure and tight fit can be ensured for the core, all the wires can be hidden away whilst not compromising the required space.
Open ruimte voor feedback over de installatie procedure)


For the rest of the electronics no specific location was made in order to hold them down. This caused a rattling sound when moving the pot around, in the first design this was compromised due to the size limitations. But if the modification for holding the core would be made, this is a must. Not only will it make the wires more likely to entangle, come lose or even break, but it is also more professional to make sure that everything is securely put in place.


'''Stelling 2)'''
The placement of the sensors can also be improved. Now there is a moisture sensor that is stuck in a hole that is halfway down the pot. This makes for quite a big risk, there is a big flood risk for the electronics if the seal between the pot and the sensor is not good enough. This could be solved by placing the moisture sensor in the top of the pot and making some sort of straw that can be used to reroute the wires into the bottom compartment. This would make sure that the leak risk is completely gone whilst still having no visible wires that can be pulled out by the clients. When it comes to the rest of the wiring, has been done in making channels that can route these wires. It is not a necessity, but it does make sure that the wires become less entangled and thus maintenance will be easier when the pot has to be disassembled.


Mijn cliënten hebben meer tijd besteed met de slimme pot dan met de controle tulp.  
Lastly there are some improvements when it comes to waterproofing and making the prints. In this design, the only place that was not waterproof from the build plate of the printer was the bottom of the pot, where the plant would be placed in. This was solved by using a layer of epoxy for plastics on the inside and outside. For a build that was completed in 9 weeks a viable option but it is not ideal. It is expensive and not very easy to do on the inside of the pot. A better solution would be some sort of coating that could be sprayed on the outside in order to make it waterproof. Then, there is the water issue around the moisture sensor, as a quick fix a piece of tape was used to get a tighter seal. This is by no means an ideal solution. It would be a lot better to move the sensor or to make some sort of rubber seal, like an O-ring. This would make the seal tighter and it lasts longer than the piece of tape.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
For now the prints were made with PLA, this is a reasonable material to use in the spring and summer for this type of project. But it would be better if PET-G was used. PET-G can withstand a higher temperature than PLA and one if its useful properties is that it is hydrophobic. Meaning that in the winter when the central heater is on and the pot is placed above the heater, the pot will not deform due to the heat. This could be the case with PLA. And it would be more waterproof by itself than PLA, and that is not a bad thing when designing a plant pot.


Open ruimte voor feedback over de besteedde tijd)
=Giving a presentation=
When it came time to make the presentation it was important to keep in mind what the focus was on during this project. The focus was not on electronics, software, 3D printing or literary study. The focus was on getting the right message to the people with Down’s syndrome to get them excited to work with FLEUR and to contribute to their daily activities. The electronics, software and 3D printing were a key part but in the end, it was a case of choosing the right tools for the job.
In the presentation, this was kept in mind. Many slides were dedicated to how the group would achieve projecting the right message to these people. So slides that included the questionnaires, the meeting we had with a caretaker, the literary study we performed and of course the USEr analysis. This is where the main focus during the presentation had to be in order for us to get our message across to the other groups.
In the last couple of slides, attention was given to the ‘tools’ that we used. So the electronics and the 3D printing process. It was important to shed some light on how the information we had received from the caretakers had influenced our decision. So why did we use the Core platform and why choose that particular 3D design for FLEUR. This ultimately showed how we wanted to achieve that people with Down’s syndrome would be not only excited to work with FLEUR, but that it would help them in their daily life.
When it came to giving the presentation this went quite well. How we intended to divide the time, despite the fact that we did not complete the whole presentation in 15 min, was achieved. Most of the time went to user interaction and how this was important for us with less time spent on the technical side of the project. In the end, the presentation had everything that the group wanted to share and the presentation can be found in the following link.


https://drive.google.com/drive/folders/1F2kOWIv5RVl4_EYyO0mUUrJ0aGCaT1-m?usp=sharing


=References=
The following list of literature has been read to gain knowledge of the field of the problem
===Sources on existing smart greenhouse control systems===
[1] Abbassy, M. M., & Ead, W. M. (2020). Intelligent Greenhouse Management System. 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020. https://doi.org/10.1109/ICACCS48705.2020.9074345
This paper mentions an robotic intelligent greenhouse management system. Which reads out the water level, humidity, and measures the moisture content of the soil based on real-time area data. With arduino components.


'''Stelling 3)'''
[2] Kaneda, Y., Ibayashi, H., Oishi, N., & Mineno, H. (2015). Greenhouse environmental control system based on SW-SVR. Procedia Computer Science, 60(1). https://doi.org/10.1016/j.procs.2015.08.249
This paper includes information about the general design of a greenhouse automatic environment control system.


De slimme pot voegt wat toe aan de dagbesteding van mijn cliënten t.o.v. de controle pot.  
[3] Kokieva, G. E., Trofimova, V. S., & Fedorov, I. R. (2020). Greenhouse microclimate control. IOP Conference Series: Materials Science and Engineering, 1001(1). https://doi.org/10.1088/1757-899X/1001/1/012136
This paper discusses (the lack of) a mathematical model to control greenhouse temperature and heat transfer.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
[4] Kumar, A., Singh, V., Kumar, S., Jaiswal, S. P., & Bhadoria, V. S. (2020). IoT enabled system to monitor and control greenhouse. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.11.040
This paper includes diagrams of arduino (components) and wiring to assemble a greenhouse management system.


Open ruimte voor feedback over de dagbesteding)
[5] Sri Jahnavi, V., & Ahamed, S. F. (2015). Smart wireless sensor network for automated greenhouse. IETE Journal of Research, 61(2). https://doi.org/10.1080/03772063.2014.999834
This source includes information on all types of smart sensors aimed at a smart greenhouse.


[6] Von Borstel, F. D., Suárez, J., De La Rosa, E., & Gutiérrez, J. (2013). Feeding and water monitoring robot in aquaculture greenhouse. Industrial Robot, 40(1). https://doi.org/10.1108/01439911311294219
This paper contains the design of a robotic system to feed aquatic organisms and measure water physicochemical parameters in experimental aquaculture ponds. Our own system is focused on plants but the robotic monitoring of environmental parameters is of interest here.


'''Stelling 4)'''
[7] Zhang, C. (2018). Greenhouse intelligent control system based on microcontroller. AIP Conference Proceedings, 1955. https://doi.org/10.1063/1.5033697
This paper contains a chart with components of a greenhouse control system, including information on the circuitry per module, and a flow chart of how the software should work.


Mijn cliënten kunnen de slimme pot zelfstandiger gebruiken dan de controle pot.  
[8] Zhao, R., & Lu, L. (2020). Automatic Temperature and Humidity Detection and Alarm System for Greenhouse. IOP Conference Series: Earth and Environmental Science, 512(1). https://doi.org/10.1088/1755-1315/512/1/012099
This paper designs and implements the monitoring and alarm system of temperature and humidity of a greenhouse.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
[9] Carder, C. (2004). Irrigation systems. Rocky Mountain Construction, 85(20), 5. Retrieved from https://search-proquest-com.dianus.libr.tue.nl/trade-journals/irrigation-systems/docview/196317404/se-2?accountid=27128
A paper about the irrigation technology being used currently


Open ruimte voor feedback over zelfstandigheid)
[10] Mudiyanti, R. (2019). Design watering system on greenhouse using microcontroller with matrix based. iopscience.iop.org. 1280 022067
This paper is about desiging a watering system on a greenhouse using microcontroller with matrix based


===Effect of plant caring on health===
[11] Loram, A., Warren, P., Thompson, K., & Gaston, K. (2011). Urban Domestic Gardens: The Effects of Human Interventions on Garden Composition. Environmental Management, 48(4), 808–824. https://doi.org/10.1007/s00267-011-9723-3
This paper talks about how taking care of plants works stress-relieving.


'''Stelling 5)'''
[12] Pedrinolla, A., Tamburin, S., Brasioli, A., Sollima, A., Fonte, C., Muti, E., Smania, N., Schena, F., & Venturelli, M. (2019). An Indoor Therapeutic Garden for Behavioral Symptoms in Alzheimer’s Disease: A Randomized Controlled Trial. Journal of Alzheimer’s Disease, 71(3), 813–823. https://doi.org/10.3233/jad-190394
This paper is about fardening as a therapy for people with Alheimers disease.


Omdat de slimme pot zelf de cliënten aanstuurt, heb ik meer tijd over voor andere zaken.  
[13] George, D. R. (2013). Harvesting the Biopsychosocial Benefits of Community Gardens. American Journal of Public Health, 103(8), e6. https://doi.org/10.2105/ajph.2013.301435
This paper is about how community gardens work for people with other mental illnesses, so it could also work on people with down syndrome.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
[14] George, D. R., Kraschnewski, J. L., & Rovniak, L. S. (2011). Public Health Potential of Farmers’ Markets on Medical Center Campuses: A Case Study From Penn State Milton S. Hershey Medical Center. American Journal of Public Health, 101(12), 2226–2232. https://doi.org/10.2105/ajph.2011.300197
This paper is about how farmer-markets work positively on the health of people.


Open ruimte voor feedback over de tijdsbesparing)
===Plants and how to care for them===
[15] Weatherley, P. E. (1976). Introduction: water movement through plants. Philosophical Transactions of the Royal Society of London. B, Biological Sciences, 273(927), 435–444. https://doi.org/10.1098/rstb.1976.0023
This paper explains how water movement in plants work.


[16] Chao, D., & Lin, H. (2010). The tricks plants use to reach appropriate light. Science China Life Sciences, 53(8), 916–926. https://doi.org/10.1007/s11427-010-4047-8
This paper explains how plants make sure they get the right amount of light, so not too much and not too little.


'''Stelling 6)'''
[17] Drury, & Sally. (2011). Watering, bedding plants and tubs. Horticulture week, 34. https://search-proquest-com.dianus.libr.tue.nl/trade-journals/watering-bedding-plants-tubs/docview/872335545/se-2?accountid=27128
This paper explains when it is the best time of day to water certain plants.


Mijn cliënten vonden het gebruik van de slimme pot leuker dan van de controle tulp.  
[18] Rogers, P. (1993). Watering is crucial to plants: [ALL Edition]. Telegram & Gazette, G1. https://search-proquest-com.dianus.libr.tue.nl/newspapers/watering-is-crucial-plants/docview/268517145/se-2?accountid=27128
This paper explains why it is important that plants get the right amount of water.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
[19] Vanderbilt, V., & Grant, L. (1985). Plant Canopy Specular Reflectance Model. IEEE Transactions on Geoscience and Remote Sensing, GE-23(5), 722–730. https://doi.org/10.1109/tgrs.1985.289390
A model for the amount of light specularly reflected and polarised by a plant.


Open ruimte voor feedback over het gebruiksplezier)
[20] Roberts, E., & Burleigh, M. (2010). Watering Systems for Success in Growing Plants, Using Low pH and Ammonium Nitrogen. Cactus and Succulent Journal, 82(6), 266–275. https://doi.org/10.2985/0007-9367-82.6.266
The paper describes what changes should be made to the water that is used in the system in order to get the best results.


===The syndrome of Down===
[21] Angela P. Presson, Ginger Partyka, … Edward R.B. McCabe, Current Estimate of Down Syndrome Population Prevalence in the United States, The Journal of Pediatrics, Volume 163, Issue 4, 2013, Pages 1163-1168, ISSN 0022-3476, https://doi.org/10.1016/j.jpeds.2013.06.013.
A paper about how often the syndrome of down occurs


'''Stelling 7)'''
[22] Robert A. Catalano, Down syndrome, Survey of Ophthalmology, Volume 34, Issue 5, 1990, Pages 385-398, ISSN 0039-6257, https://doi.org/10.1016/0039-6257(90)90116-D.
This paper goes really deep into what the syndrome of down actually is


Het gebruik van de slimme pot wekt zorgzaam gedrag op in mijn cliënten t.o.v. de controle pot.  
[23] Mark Selikowitz. Down Syndrome. Vol 3rd ed. OUP Oxford; 2008. Accessed April 22, 2021. http://search.ebscohost.com/login.aspx?direct=true&db=nlebk&AN=467605&site=ehost-live
This paper is about raising children with down syndrome


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
[24] Chapman, Robin & Seung, Hye-Kyeung & Schwartz, Scott & Bird, Elizabeth. (2000). Predicting Language Production in Children and Adolescents With Down Syndrome. Journal of speech, language, and hearing research: JSLHR. 43. 340-50. 10.1044/jslhr.4302.340.
This paper is about the language skills of adolescents with down syndrome.


Open ruimte voor feedback over zorgzaamheid)
===Other sources===
[25] Wieseler, N. A., Hanson, R. H., Chamberlain, T. P., & Thompson, T. (1988). Stereotypic behavior of mentally retarded adults adjunctive to a positive reinforcement schedule. Research in Developmental Disabilities, 9(4), 393–403. https://doi.org/10.1016/0891-4222(88)90033-9
A paper about a study which evaluated the indirect effects on stereotypic frequency when the value of a concurrent fixed-interval reinforcement schedule for adaptive behaviour was varied. 13


[26] Vijendra Babu, D. (2020). Automatic Irrigation Systems for Efficient usage of Water using Embedded Control Systems. 993 012077
A paper about a similar project being done


'''Stelling 8)'''
[27] Gafni, V. (1999). Robots: A Real-Time Systems Architectural Style. ACM SIGSOFT Software Engineering Notes, 24(6), 1–18. https://doi.org/10.1145/318774.318786 This paper gives a broad description of what robots are


Mijn algemene ervaring met de slimme pot is positief.  
=Appendix A=
The plan and task-division per week including a logbook of the work that was done per person of the group is listed below.
==Week 1==
*Brainstorming about possible subjects (all)


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
*Make this planning/approach (Bert, Nando)


Open ruimte voor feedback over de algemene ervaring)
*Finding relevant papers (state-of-the-art) (all)  


=Contacts information of our target group in the Brabant or Limburg=
*Deciding on a specific user (all)


Email list:
*Research about how this product will benefit the  users (all)


suzannevanherk@hetnet.nl of tineke.eulderink@onsbrabantnet.nl
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 10
| Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)
|-
| Bert
| 10
| Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)
|-
| Nando
| 10
| Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)
|-
| Dorien
| 10
| Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)
|}


info@lunetzorg.nl
==Week 2==


info@kentalis.nl
*Literature study (all)


info@asvz.nl
*Contacting care homes for information (Nando, Dorien)


clientenservice@cello-zorg.nl
*Starting the USEr section on the wiki (Marijn)


clientservicedesk@daelzicht.nl
*Listing needs of people with Down syndrome (Marijn, Dorien)


info@downvision.nl
*Research about suitable hardware (Nando, Bert)


mgetempelaars@gmail.com
*making a RPC list (Dorien, Marijn)


kiemkracht@gmail.com
*Design an electrical circuit (Bert)


jmaas@oro.nl
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 10
| Meetings (4h), improving the users/society/enterprise section (1h), literature study into the needs of people with DS (2h), improving our schedule and gathering action points for this week (1h), redefining our goals and thinking about a way to test those (2h)
|-
| Bert
| 9
| Meetings (4.5h), research about components (2h), designing possible electrical circuit (0.5h), thinking about questions we want to ask caretakers (2h)
|-
| Nando
| 13
| Meetings (4.5h), improving the approach section (0.5h), literary study into similar systems that already exist (4h), meeting with a caretaker and processing the results (4h)
|-
| Dorien
| 9.5
| Meetings (4.5h), literary study into the approach of people with DS (2h), prepare questions to healthcare institutions (2h), prepare mails and calls to healthcare institutions (1h)
|}


info@psw.nl
==Week 3==


clientloket@radar.org
*Research about the components and ordering them (Nando, Dorien)


m.v.bavel@sdwzorg.nl
*Adjusting the planning (Dorien)


match4care@zuidwester.org
*Making the CAD design of the 3D printed pot (Nando)


*Working on the code (Bert)


KERN
*Designing the experiment (Marijn)


stichting Downsyndroom Eindhoven
*Revising RPC list (Nando, Marijn)


Email: suzannevanherk@hetnet.nl of tineke.eulderink@onsbrabantnet.nl
*Extending the approach section on the wiki (Dorien)


Tel: helaas niet te vinden.
*Making the BoM (Dorien)


{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 10.5
| Meetings (5h), writing the goals section (1.5h), writing the hypothesis section (1h), writing the experiment section (1h), writing the questionnaire (1h), writing the RPC list (1h).
|-
| Bert
| 11
| Meetings (5h), contacting care facilities (2h), research about the M5Stack (2h), research about how the programming works (2h)
|-
| Nando
| 9
| Meetings (5h), research about components and order them (2h), working on the CAD design (2h)
|-
| Dorien
| 11
| Meetings (5h), research about components and order them (2h), make BoM (1h), adjust planning including test week (1h), extend the approach section (2h)
|}


==Week 4==


lunet zorg woonpark Eckartdal
*Design the pot for 3d-printing (Nando)


tel: 088 511 5000 of 088 551 6000
*Picking up the components of the system (Dorien)


Email: info@lunetzorg.nl of clientbureau@lunetzorg.nl
*Coding the core (Bert)


*Contacting users and documenting various activities in the wiki (Marijn)


Ketalis Eindhoven Aalsterweg [Deze focussen op taalstoornis en doofheid, niet exact wat wij zoeken]
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 11
| Meetings (4h), making the email with questionnaire for hypothetical use (3h), gathering email addresses of as many care homes as possible(1h), sending all the mails (0.5h), updating the RPC list with interface/interaction (0.5h), making a storyboard for the promotion video (1.5h), exploring possible names for the system (0.5h)


aalsterweg 285H (& castiliëlaan)
|-
| Bert
| 16
| Meetings (4h), getting the M5Stack working (2h), coding the M5Stack (10h)
|-
| Nando
| 14
| Meetings (4h), making the design in NX (7h), researching the plastics needed for 3d printing (1.5h), setting up the 3d printer/starting the prints (1.5h)
|-
| Dorien
| 8
| Meetings (4h), picking up the components and getting the M5Stack working (4h)
|}


5644RE Eindhoven (5629CH)
==Week 5==


tel: 0800-53682547
*Continue working on the code (Bert, Dorien)


Email: info@kentalis.nl
*Continue working on the 3d-printing process (Nando)


*Writing varies section in the wiki (Marijn)


ASVZ
*Getting more replies to our questionnaire (Marijn)


Zuid-Holland en Noord-Brabant
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 13
| Meetings (5h), writing the section about branding (0.5h), updating the questionnaire section and writing the reply section (2h), creating a plan for the next two weeks and gathering action-points and diving the work (1h), start writing the discussion (1.5h), calling and then remailing as many contact points as possible (3h)


www.asvz.nl
|-
| Bert
| 12
| Meetings (5h), working on the code (7h)
|-
| Nando
| 11
| Meetings (4h), troubleshooting the 3D printer(4h), adjusting the 3D model(2h), starting the prints/getting the right slicer settings(1h)
|-
| Dorien
| 11
| meetings (5h), connecting the M5Stack Core (2h), working on the code (4h)
|}


0184-491200
==Week 6==


info@asvz.nl
*Working on the code (Dorien, Bert)


*Troubleshooting 3d-printing problems (Nando)


Cello
*Perfectionalizing the hardware


Noordoost Noord-Brabant (Den Bosch-Eindhoven-Tilburg) en Zuidwest Gelderland (Bommelerwaard)
*Working in the wiki (Marijn)


www.cello-zorg.nl
*Finding care institutions who have people with downsyndrome and want to test a pot (Marijn)


088-345 11 11    = clientenservice
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 7.5
| Meetings (4h), updating the results section from calling and mailing (0.5h), cleaning up our group’s shared notes and making a list of all steps required to finish this project (0.5h), making a table with questionnaire responses and updating the results section (1.5u), mailing back and forth to come to an agreement on the testing period (1h)


clientenservice@cello-zorg.nl
|-
| Bert
| 11
| Meetings (4h), programming (5h), contacting care facilities (2h)
|-
| Nando
| 10
| Meetings (4h), troubleshooting the printer (1h), explaining the process of designing/making the print (3h), post-processing the printed pot (2h)
|-
| Dorien
| 10h
| Meetings (4h), trying to program of the clock (6h)
|}


088 345 1000    = receptie
==Week 7==


*Finalising Agreements about the test period (Marijn)


Daelzicht
*Debugging the code (Marijn, ...)


Limburg
*Shooting a promotion video/demo (Marijn)


www.daelzicht.nl
{| border=1 style="border-collapse: collapse;" cellpadding = 2
! Name
! Total hours
! Tasks
|-
| Marijn
| 16.5
| Meetings (4h), mailing and calling to come to an agreement on the testing period (1.5h), picking up the components from different group members (1.5h), installing and testing the core firmware in my own laptop (2h), debugging the code (4h), assembling and adjusting components (2.5h), shooting and transferring footage for the promotion demo (1h)


0475 577 333
|-
| Bert
| 10.5
| Meetings(4h), delivering components to Dorien(1.5h), programming(5h)
|-
| Nando
| 10.h
| meetings(3h), getting a new 3D printer(3h), making changes to the design for the new printer(1h), meeting explaining the design for the printer(1.5h), working on the wiki(2h)
|-
| Dorien
| 14
| Meetings (4h), programming (10h)
|}


clientservicedesk@daelzicht.nl
==Week 8==


*Editing the promotion video (Marijn)


Dagcentrum De Poppenkraam
*Debugging the code (Marijn, Dorien)


Veldhoven e.o.
*Preparing for the testing period (Marijn, Dorien)


www.de-poppenkraam.nl/main.htm
*Assembling and testing the 2 prototypes (Marijn)


mw. A. van der Velden, mw. N. Fredriksz
*Finishing the presentation (all)


040-2052839 of 040-2052824
{| border=1 style="border-collapse: collapse;" cellpadding = 2
 
! Name
Email: -
! Total hours
 
! Tasks
 
|-
Downvision
| Marijn
 
| 22.5
Drunen, Waalwijk, Den Bosch
| Meetings (4h), working with Dorien on campus (3h), mailing and calling to come to an agreement on the testing period (1h), waterproofing the system as a whole (0.5h), debugging the code (6h), editing the promotion demo (2.5h), testing the pot myself to find bugs and to finding good threshold values (1h), getting a real flower for the testing at sdw (0.5h), making the manual (0.5h), working on the presentation (3.5h)
 
www.downvision.nl
 
Miriam van Oorschot
 
06 40 33 78 63
 
info@downvision.nl
 
 
Huppetee
 
Zeeland en West-Brabant
 
Marinda Tempelaars
 
mgetempelaars@gmail.com
 
www.huppetee.nu
 
www.facebook.com/huppetee
tel: 076 531 5315
 
 
 
Kiem, persoonlijke groei
 
Tilburg e.o
 
Ontwikkelingsstimulering en individuele begeleiding. Advisering en ondersteuning van ouders en directe betrokken bij het kind met de methode early
 
intervention/kleine stapjes, zowel inzetbaar in de thuissituatie als op de peuterspeelzaal of (reguliere)school.
 
Contact: Famke Beeloo
 
Telefoon: 06.17356857
 
Mail: kiemkracht@gmail.com
 
 
ORO
 
Helmond, Geldrop, Mierlo, Laarbeek/Deurne, Asten, Someren, Bakel
 
www.oro.nl
 
Jolanda Maas (inhoudelijke informatie)
 
0492 – 53 0053
 
jmaas@oro.nl
 
Langdurige begeleiding van de ouders bij early intervention, tevens speelleergroep en schoolvoorbereidende groep.
 
 
 
PSW Junior
 
Midden-Limburg
 
www.pswjunior.nl
 
Marjolein Dohmen – van den Assem
 
0475-474 400
 
info@psw.nl


|-
| Bert
| 8
| Meetings(4h), debugging the code(1h), checking code and trying things(3h)
|-
| Nando
| 9
| Meetings(3h), working on the final presentation(4h), preparing for the presentation(2h)
|-
| Dorien
| 15
| Meetings (4h), working with Marijn on campus (3h), debugging the code (6h), prepared the presentation (2h)
|}


Radar
==Week 9==


Zuid-Limburg
*Finishing the wiki (all)


www.radar.org
*Giving the final presentation (Dorien, Marijn, Nando)


088-350 5000
*Processing the results of the test week (Marijn, Dorien)
 
clientloket@radar.org
 
 
 
SDW
 
West-Brabant, Roosendaal
 
www.sdw.nl
 
M van Bavel
 
m.v.bavel@sdwzorg.nl
 
088-2593165
 
088 - 259 3010 voor algemene vragen
 
 
Stichting Zuidwester (praktische pedagogische gezinsbegeleiding)
 
West-Brabant, Zeeland en de Zuid-Hollandse Eilanden (Barendrecht, Goeree-Overflakkee, Hoeksche Waard, Rotterdam, Voorne-Putten)
 
www.zuidwester.org
 
0187-898888
 
match4care@zuidwester.org
 
=Deliverables=
*The first deliverable will be this wiki page. It logs our progression and helps the tutors and other people with an interest in our project to follow the progression of the project.
 
*The second deliverable will be our physical prototype of the greenhouse climate management system.
 
*The third deliverable is the final presentation, in which we present our project for our teachers and peers.
 
=Milestones=
*1: Literature study
*2: Make an RPC list
*3: Make a BOM list
*4: Ordering of the parts
*5: Software development
*6: Making the prototype
*7: Make the final design
*8: Finalise the wiki page
 
=Objectives=
===Cost efficient/Affordable===
 
The prototype should make optimal use of the available resources. Furthermore the components and assembly process should be as cheap as possible to reduce the total production cost, making the design cheaper for users (or obtaining a bigger profit margin for the vendor)
 
===Easy to use===
 
The prototype should be easy to install and operate. This is especially important considering the target audience of mentally handicap people. This product is designed to help these people with doing more complex tasks. If the operation of the product is not extreme straight forward it will only work counter effectively.
 
===Friendly/Positive reinforcement===
We want the product to interact nicely with the user. The product should communicate with the user in a friendly manner and compliment the users when they perform an action. This makes the product more pleasant to use and the explicit positive reinforcement confirm to the mentally disabled people that they are in fact doing a good job.
 
=BoM=


{| border=1 style="border-collapse: collapse;" cellpadding = 2  
{| border=1 style="border-collapse: collapse;" cellpadding = 2  
! Component
! Name
! Costs
! Total hours
! Amount
! Tasks
! Total costs
! Link to webshop
|-
|-
| Earth Unit
| Marijn
| € 4,-
| 13.5
| 2
| Delivering and retrieving the prototype to SDW Roosendaal (3h), giving/watching presentations (2h), redesign the layout and bringing more structure to the wiki (1h), editing the wiki (6h), uploading the changes made by other group members who cannot access the wiki, and reformatting (1.5h)
| € 8,-
 
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/unit/m5stack-earth-unit
|-
|-
| Hub Unit
| Bert
| € 3,50
| 6
| 2
| Editing the wiki (4h), reading through the wiki (2h)
| € 7,-
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/unit/m5stack-1-3-hub-unit
|-
|-
| Light Unit
| Nando
| € 4,-
| 6
| 2
| Giving/preparing the presentation (2h), working on the wiki(4h)
| € 8,-
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/unit/m5stack-light-unit
|-
|-
| M5STACK M5Core Gray - ESP32 Development Kit
| Dorien
| € 30,-
| 15
| 2
| delivering and retrieving the prototype to Veldhoven (5h), giving/watching presentations (2h), editing the wiki (8h)
| € 60,-
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/m5core/m5stack-m5core-gray-esp32-development-kit
|-
| DuPont Jumper wires Male-Female
| € 0,75
| 4
| € 3,-
| https://www.tinytronics.nl/shop/nl/kabels/prototype-draden/dupont-jumper-draad-male-female-20cm-10-draden
|-
| M5Stack NeoPixel LED strip
| € 10,49
| 2
| € 20,98
| https://www.conrad.nl/p/makerfactory-m5stack-neopixel-strip-mf-6324774-led-lamp-met-connectoren-malefemale-35-v-23-cm-na-tape-cut-2108258
|-
| M5Stack Bus Module
| € 6,-
| 2
| € 12,-
| https://www.tinytronics.nl/shop/nl/platforms/m5stack/m5core/module/m5stack-bus-module-voor-m5core
|-
| Material 3D printed pot and box
| TBD
| x
| TBD
| https://www.filamenten3d.nl/product/pla-filament-hotorange3d/
|}
|}


=State of the art=
=Appendix B=
This was the mail that was send to the care houses in order to broaden our perspective on the needs and preferences of people with Down Syndrome
==Email with a questionnaire for hypothetical use==
Beste meneer/mevrouw,


===Section one: sources on existing smart greenhouse control systems===
Wij zijn een project groep aan de technische universiteit Eindhoven die bezig is met het ontwikkelen van een slimme plantenpot voor mensen met een verstandelijke beperking. Ons systeem moet het verzorgen van een plantje eenvoudiger en leuker maken om zo de dagbesteding en zelfstandigheid van deze mensen positief te beïnvloeden. Om tot het beste ontwerp te komen zijn wij meningen aan het verzamelen van mensen met ervaring in het vakgebied. Wij zouden enorm geholpen zijn als u kort uw mening zou willen geven over ons concept. In de bijlage vind u een korte beschrijving van ons systeem en 4 stellingen waar u een mening dient te omcirkelen, dit alles zal maar 5 tot 10 minuten duren. De antwoorden zullen alleen gebruikt worden ter sturing van het ontwerp proces en we zijn niet geïnteresseerd in persoonlijke gegevens van wat voor vorm dan ook. Als u vragen heeft of meer wilt weten over ons concept beantwoord ik ze graag.


[1] ''Abbassy, M. M., & Ead, W. M. (2020). Intelligent Greenhouse Management System. 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020. https://doi.org/10.1109/ICACCS48705.2020.9074345 ''
Alvast bedankt en met vriendelijk groet,


This paper mentions an robotic intelligent greenhouse management system. Which reads out the water level, humidity, and measures the moisture content of the soil based on real-time area data. With arduino components.
Namens de gehele project groep,


Marijn Borghouts


[2]''Kaneda, Y., Ibayashi, H., Oishi, N., & Mineno, H. (2015). Greenhouse environmental control system based on SW-SVR. Procedia Computer Science, 60(1). https://doi.org/10.1016/j.procs.2015.08.249''


This paper includes information about the general design of a greenhouse automatic environment control system.
'''Bijlage'''


Deze bijlage bevat een korte uitleg over ons concept, opgevolgd door een vragenlijst met slechts 4 stellingen en wat ruimte voor algemene opmerkingen.
Ons concept Planten in huis zorgen voor een leuk aanzicht en voor frisse lucht. Daarnaast kan het verzorgen van planten voor mensen met een verstandelijke beperking goed zijn voor het ontwikkelen van een zorgzaam karakter en het leren volgen van tijdsgebonden routine. Aangezien een plant in een potje met enige regelmaat water nodig heeft. Ons ontwerp beoogt deze positieve effecten van het verzorgen van planten te behouden terwijl het eventuele drempels uit de weg neemt. Daarom hebben wij een slimme plantenpot ontworpen. Deze pot houdt met sensoren de vochtigheid van de grond bij en de hoeveelheid zonlicht die er op de pot schijnt. Aan de hand van deze gegevens bepaalt de pot zelf wanneer het tijd is om de plant die er in zit water te geven of wanneer deze in of uit de zon moet.
De pot doet dit door op een vriendelijke en positieve manier te communiceren met zijn omgeving. De pot beschikt over een speaker, led-lampjes, en een schermpje om zo op verschillende manier de aandacht van iemand in zijn omgeving te trekken. De pot zal dus bijvoorbeeld hardop zeggen dat hij dorst heeft en graag een beetje water wil. Daarbij knipperen er dan blauwe lampjes en is het symbool van een gieter te zien op de pot. Doordat de pot duidelijke korte commando’s geeft en daarna de gebruiker bedankt bij een volbrachte taak hopen wij betrokkenheid en plezier bij de verzorging te vergroten, en de persoon in kwestie zelfstandiger te maken. Aangezien de slimme pot zelf de gebruiker aanstuurt zou dit een klein deel van de werkdruk op de verzorgers kunnen wegnemen.


[3]''Kokieva, G. E., Trofimova, V. S., & Fedorov, I. R. (2020). Greenhouse microclimate control. IOP Conference Series: Materials Science and Engineering, 1001(1). https://doi.org/10.1088/1757-899X/1001/1/012136''


This paper discusses (the lack of) a mathematical model to control greenhouse temperature and heat transfer.
'''Vragenlijst'''


Bij elke stelling dient u één antwoord wat van toepassing is te omcirkelen. Daarnaast is er open ruimte om uw menig te geven of uw antwoordt toe te lichten. Alle feedback is welkom, ook kritische uiteraard. We hebben liever te veel dan te weinig informatie dus wees niet terughoudend.


[4]''Kumar, A., Singh, V., Kumar, S., Jaiswal, S. P., & Bhadoria, V. S. (2020). IoT enabled system to monitor and control greenhouse. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.11.040''
Stelling 1)


This paper includes diagrams of arduino (components) and wiring to assemble a greenhouse management system.  
Ik zie de voordelen (zelfstandigheid, dagbesteding, zorgzaamheid) van een slimme pot voor de cliënten in mijn instelling.


Sterk oneens // Oneens // Neutraal // Eens // Sterk eens


[5]''Sri Jahnavi, V., & Ahamed, S. F. (2015). Smart wireless sensor network for automated greenhouse. IETE Journal of Research, 61(2). https://doi.org/10.1080/03772063.2014.999834''
Open ruimte voor uw mening over de voordelen)


This source includes information on all types of smart sensors aimed at a smart greenhouse.




[6]''Von Borstel, F. D., Suárez, J., De La Rosa, E., & Gutiérrez, J. (2013). Feeding and water monitoring robot in aquaculture greenhouse. Industrial Robot, 40(1). https://doi.org/10.1108/01439911311294219''
Stelling 2)


This paper contains the design of a robotic system to feed aquatic organisms and measure water physicochemical parameters in experimental aquaculture ponds. Our own system is focused on plants but the robotic monitoring of environmental parameters is of interest here. 
Ik denk dat mijn cliënten meer tijd zouden besteden met een slimme pot dan met een normaal plantje.


Sterk oneens // Oneens // Neutraal // Eens // Sterk eens


[7]''Zhang, C. (2018). Greenhouse intelligent control system based on microcontroller. AIP Conference Proceedings, 1955. https://doi.org/10.1063/1.5033697''
Open ruimte voor uw mening over de besteedde tijd)


This paper contains a chart with components of a greenhouse control system, including information on the circuitry per module, and a flow chart of how the software should work. 




[8]''Zhao, R., & Lu, L. (2020). Automatic Temperature and Humidity Detection and Alarm System for Greenhouse. IOP Conference Series: Earth and Environmental Science, 512(1). https://doi.org/10.1088/1755-1315/512/1/012099''
Stelling 3)


This paper designs and implements the monitoring and alarm system of temperature and humidity of a greenhouse.
Ik verwacht dat mijn cliënten de slimme plantenpot in de benoemde vorm zelfstandig(er) kunnen verzorgen dan een normaal plantje.


Sterk oneens // Oneens // Neutraal // Eens // Sterk eens


Open ruimte voor uw mening over zelfstandigheid)


[9]''Loram, A., Warren, P., Thompson, K., & Gaston, K. (2011). Urban Domestic Gardens: The Effects of Human Interventions on Garden Composition. Environmental Management, 48(4), 808–824. https://doi.org/10.1007/s00267-011-9723-3''


This paper talks about how taking care of plants works stress-relieving.


Stelling 4)


[10]''Pedrinolla, A., Tamburin, S., Brasioli, A., Sollima, A., Fonte, C., Muti, E., Smania, N., Schena, F., & Venturelli, M. (2019). An Indoor Therapeutic Garden for Behavioral Symptoms in Alzheimer’s Disease: A Randomized Controlled Trial. Journal of Alzheimer’s Disease, 71(3), 813–823. https://doi.org/10.3233/jad-190394''
Ik verwacht dat mijn cliënten meer plezier ervaren in het verzorgen van een plantje als deze een stem heeft een positieve feedback geeft.


This paper is about fardening as a therapy for people with Alheimers disease.
Sterk oneens // Oneens // Neutraal // Eens // Sterk eens


Open ruimte voor uw mening over het gebruiksplezier)


[11]''George, D. R. (2013). Harvesting the Biopsychosocial Benefits of Community Gardens. American Journal of Public Health, 103(8), e6. https://doi.org/10.2105/ajph.2013.301435''


This paper is about how community gardens work for people with other mental illnesses, so it could also work on people with down syndrome.


Afsluitende vraag)


[12]''George, D. R., Kraschnewski, J. L., & Rovniak, L. S. (2011). Public Health Potential of Farmers’ Markets on Medical Center Campuses: A Case Study From Penn State Milton S. Hershey Medical Center. American Journal of Public Health, 101(12), 2226–2232. https://doi.org/10.2105/ajph.2011.300197''
Eerst willen we u nogmaals bedanken voor uw tijd en mening. Als laatste willen wij u vragen of u eventueel interesse heeft om een eerste prototype van dit
ontwerp (gehaal gratis) gedurende een week uit te testen. JA // NEE


This paper is about how farmer-markets work positively on the health of people.
Als dat het geval is kunnen we hier nog nader contact over hebben. Uw antwoorden en eventuele vragen kunt u terug sturen naar dit e-mailadres
(m.m.borghouts@student.tue.nl)


Met vriendelijke groet,


[13]''Wieseler, N. A., Hanson, R. H., Chamberlain, T. P., & Thompson, T. (1988). Stereotypic behavior of mentally retarded adults adjunctive to a positive reinforcement schedule. Research in Developmental Disabilities, 9(4), 393–403. https://doi.org/10.1016/0891-4222(88)90033-9''
Marijn Borghouts


A paper about a study which evaluated the indirect effects on stereotypic frequency when the value of a concurrent fixed-interval reinforcement schedule for adaptive behaviour was varied.
==Results of the questionnaire==


This questionnaire was sent out as an email on Thursday the 13th of May to 13 new, not yet approached, care institutions that were located in Brabant or Limburg. Unfortunately, we immediately got an automated reply that said that one of the persons we were trying to contact was on holiday. That was when we realized that our mails had been sent in the May holiday and that there was a chance that our mail would be far down in the recipient's inbox by the time somebody starts working again. We decided to wait until Wednesday the 19th to see if we would get a reaction. Unfortunately, we did not receive a single one. So on that Wednesday morning, we decided to call as many institutions as possible, you can see the results below. Unfortunately after 3h of work, we still had zero actual replies.


[14]''Weatherley, P. E. (1976). Introduction: water movement through plants. Philosophical Transactions of the Royal Society of London. B, Biological Sciences, 273(927), 435–444. https://doi.org/10.1098/rstb.1976.0023''
After a small pep talk from René van Molengraft, we spent some extra time and effort on the most promising leads. Eventually I got four filled out questionnaires in my mailbox. Of which three people were interested in helping us test the prototype. So the next step will be to make at least 2 final appointments to test in week 7 or week 8 if necessary.
The respondents are:
1)Tineke eulderink from Kern Eindhoven. She was interested in testing with us.
2)Tanja dekker from ASVZ-Eureka- Caretechnology en innovation. She was interested in testing with us. She works in multiple locations in Brabant.
3) Vincent Rijpert from SDW Roosendaal. He was not interested in testing with us.
4) Malu Coppens from SDW Roosendaal. She was interesting in testing with us.


This paper explains how water movement in plants work.
Eventually, we were able to find 2 test locations to test FLEUR, we will therefore leave FLEUR for an entire week at the test location and we will give the care takers a different questionnaire after that week.


[[File:tabellen.png]]


[15]''Carder, C. (2004). Irrigation systems. Rocky Mountain Construction, 85(20), 5. Retrieved from https://search-proquest-com.dianus.libr.tue.nl/trade-journals/irrigation-systems/docview/196317404/se-2?accountid=27128
[[File:tabellen2.png]]


A paper about the irrigation technology being used currently
'''Conclusion'''


Getting in contact with mentally disabled people and their caretakers has proven to be very difficult over the phone. The bigger institutions have receptionists that answer the phone and they don’t have knowledge about the actual caring that happens in these institutions. While the smaller ones are more likely not to answer the phone. Luckily persistence pays off. In the end, we got 4 replies of which 3 people were positive about our design ideas and were willing to test with us. This proves that our target audience likes our idea and that there is a potentially good product here. One of the 4 was less enthusiastic but his feedback is perhaps even more valuable. We learned that FLEUR will likely not work for all persons with Down syndrome since the degree of mental impairedness varies greatly within this target group. Now, all we can do is hope for a fruitful testing week and useful feedback.


[16]''Vijendra Babu, D. (2020). Automatic Irrigation Systems for Efficient usage of Water using Embedded Control Systems. 993 012077
=Appendix C=
==Questionaire answers from a caretaker and personal friend==


A paper about a similar project being done
In order to get a deeper understanding of how people with Down's syndrome would or could react to our project contact was sought with a caretaker. This caretaker has around 10 years of experience with these particular patients, which means that the answers to the questions are useful to the project at hand. In the following text first the questions will be posed after which the answers are written. Lastly, some extra pointers given by the caretaker will be mentioned.


Q) What would people with Down's syndrome need in daily life that this plant can help with? (To combat boredom for example)


[17]''Mudiyanti, R. (2019). Design watering system on greenhouse using microcontroller with matrix based. iopscience.iop.org. 1280 022067
A) Becoming more independent, that is a hot item at the moment. Caretakers want their patients to be able to live as long as possible on their own.


This paper is about desiging a watering system on a greenhouse using microcontroller with matrix based
Q) Do you think that our project can improve their daily life?


A) Not only do plants make sure that there is cleaner/better quality of air in the patient's room but they also get thought to take care of the plant in a creative and playful manner.


[18]''Gafni, V. (1999). Robots: A Real-Time Systems Architectural Style. ACM SIGSOFT Software Engineering Notes, 24(6), 1–18. https://doi.org/10.1145/318774.318786
Q) Do you think that our project would need to get more functions?
This paper gives a broad description of what robots are


A) Only sound might not be enough, it can become quite noisy in care homes. But these patients also react very well to a combination of visual and auditive stimulation. The visual stimulation does not need to be complicated, colors would suffice, so for example a yellow light means more sunlight or a blue light means more water. This way they also get a more satisfactory feeling in the long run. These patients also forget general tasks quite a bit, this would be giving water in regular intervals, for example, a solution would be the use of so-called 'pictokaarten' and a weekly schedule. These pictokaarten are designed to not give any confusion on the action that has to be taken and the weekly schedule gives them a place where they can easily find the tasks that have to be done on a certain day. Direct tasks, for example, more sunlight, would be perfect in a visual/auditive stimulation.


[19]''Angela P. Presson, Ginger Partyka, … Edward R.B. McCabe, Current Estimate of Down Syndrome Population Prevalence in the United States, The Journal of Pediatrics, Volume 163, Issue 4, 2013, Pages 1163-1168, ISSN 0022-3476, https://doi.org/10.1016/j.jpeds.2013.06.013.
Q) What would be the best way for our project to approach people with Down's syndrome?


A paper about how often the syndrome of down occurs
A) The best way to approach them is in a positive and cheerful way yet the message has to be simple and clear, and thank/compliment them if they performed the task well. For our project the following 3 suggestions were given: 1. 'I am thirsty, could you give me some water?', 'Thank you, now I am not thirsty anymore.' 2. 'I am quite hot, would you mind placing me in the shade?', 'Now I am nice and cool, thank you.' 3. 'I am quite cold, would you mind placing me in the sun?', 'Thank you, now I am not cold anymore.' What might help the patients, in the long run, is some sort of checklist, these already get used now to see if they keep getting a better understanding of the tasks they are performing. This checklist could ask what colour lamp has what meaning, for example, this can then be executed with their caretaker.


'''Some general remarks'''


[20]''Robert A. Catalano, Down syndrome, Survey of Ophthalmology, Volume 34, Issue 5, 1990, Pages 385-398, ISSN 0039-6257, https://doi.org/10.1016/0039-6257(90)90116-D.
*People with Down's syndrome have different levels of mental capabilities depending on their IQ. The caretaker mentioned that our project would work best with patients that have the same mental capabilities as 6-10-year-olds. Some level of understanding is needed since we are trying to learn them to care.
*They love cables that they can see. These have to be tucked away, it might not harm them but they will pull on them.
*The site botsbegleiding.nl(teach) can be used as a useful source, it officially is a site for autism but the thought processes are quite the same as those we can use.
 
=Appendix D=
The manual as well as the prepared questionnaire will be in Dutch, since the caretakers were Dutch and we did not expect them to fill in this questions in English
==Manual==


This paper goes really deep into what the syndrome of down actually is
Fleur meet om de 30 minuten of er genoeg water en zon is. Dit gaat volledig automatisch.


'''1) Actieve feedback'''


[21]''Mark Selikowitz. Down Syndrome. Vol 3rd ed. OUP Oxford; 2008. Accessed April 22, 2021. http://search.ebscohost.com/login.aspx?direct=true&db=nlebk&AN=467605&site=ehost-live
Als men per direct wil weten hoe met het plantje gaat kan men op de linker knop drukken. Dan vind er instantaan een meting plaats. Dit kan men gebruiken om na het water geven te checken of de plant weer blij is. Er wordt dan een groen licht gepresenteerd en een deuntje afgespeeld.  


This paper is about raising children with down syndrome


'''2) Slaapstand'''
Fleur werkt op baterijen. Om Fleur zo lang mogelijk mee te laten gaan kan Fleur ‘s nachts in slaapstand worden gezet. Dit doet men door tegelijk op de middelste en rechter knop te drukken. Hierdoor zal Fleur 12 uur lang in slaapstand gaan. Na die twaalf uur start Fleur weer helemaal vanzelf op. Men hoeft hem dus alleen ’s avonds uit te zetten, het aanzetten gaat vanzelf. (Als men Fleur toch eerder dan 12 uur uit de slaapstand wil halen, moet men het deksel van de pot voorzichtig afnemen en éénmaal op het rode knopje aan de zijkant van het schermpje drukken.)


[22]''Chao, D., & Lin, H. (2010). The tricks plants use to reach appropriate light. Science China Life Sciences, 53(8), 916–926. https://doi.org/10.1007/s11427-010-4047-8


This paper explains how plants make sure they get the right amount of light, so not too much and not too little.
'''3) Water geven'''


Let op!  Omdat de hoeveelheid potgrond in de plantenbak erg klein is behoeft het plantje maar erg weinig water per keer. Waarschijnlijk is een paar eetlepels voldoende. Het kan even duren voordat het water is verspreid in de potgrond. Daarom kan het dus ook even duren voordat de sensor registreert dat er water is gegeven.


[23]''Vanderbilt, V., & Grant, L. (1985). Plant Canopy Specular Reflectance Model. IEEE Transactions on Geoscience and Remote Sensing, GE-23(5), 722–730. https://doi.org/10.1109/tgrs.1985.289390


A model for the amount of light specularly reflected and polarised by a plant.
'''4) Kleine cijfertje'''


Op het schermpje van de pot staat onderin “vochtigheid” en “licht” gevolgd door een getalletje. Dit zijn de waardes die de sensoren uitleest. Deze zijn niet echt van belang voor de gebruiker maar maakt het voor ons veel makkelijker om te zien wat er gebeurd in de pot. Een hoge waarde betekent dat het donker is of dat het droog is. Een lage waarde betekent dat het licht of nat is.


[24]''Roberts, E., & Burleigh, M. (2010). Watering Systems for Success in Growing Plants, Using Low pH and Ammonium Nitrogen. Cactus and Succulent Journal, 82(6), 266–275. https://doi.org/10.2985/0007-9367-82.6.266


The paper describes what changes should be made to the water that is used in the system in order to get the best results.
'''5) Onverwachte problemen'''


De meeste problemen zouden moeten worden opgelost door het systeem te resetten. Dit doet men door het deksel van de pot voorzichtig af te nemen en éénmaal op het rode knopje aan de zijkant van het schermpje te drukken.
Heeft dit geen effect? Neem dan contact met een van de studenten op.


[25]''Drury, & Sally. (2011). Watering, bedding plants and tubs. Horticulture week, 34. https://search-proquest-com.dianus.libr.tue.nl/trade-journals/watering-bedding-plants-tubs/docview/872335545/se-2?accountid=27128


This paper explains when it is the best time of day to water certain plants.
'''6) Contact'''


Heeft u vragen of problemen kunt u kunt u altijd contact met ons opnemen.


[26]''Rogers, P. (1993). Watering is crucial to plants: [ALL Edition]. Telegram & Gazette, G1. https://search-proquest-com.dianus.libr.tue.nl/newspapers/watering-is-crucial-plants/docview/268517145/se-2?accountid=27128
Marijn Borghouts; Email m.m.borghouts@student.tue.nl


This paper explain why it is important that plants get the right amount of water.
Dorien Duyndam; Email d.a.duyndam@student.tue.nl


=User Needs and Preferences=
''We placed our mobile numbers as well as mailadresses, but because of the invasion of our privacy we will only post our mailadresses here''


People with Down syndrome have different needs and preferences compared to people without intellectual disabilities. A good product should address all of the users needs and as many possible preferences. So in order to develop a good product one should have a clear idea of what these needs and preferences are.
==Questionnaire after prototype use // Feedback after the tests==
To gather this information we have called several care-institutions asking them if they would be interested in helping us answer some questions and/or help test the first prototype. Secondly,
Although we did not execute this last questionnaire, we still did prepare it so it is worth sharing
we decided to also do a literary study into this subject to obtain even more information from other sources. 


From the literature we have found that language development is moderately to severely compromised in some children with DS and that therefore most individuals with DS also have less developed language skills at all ages in life compared to people without an intellectual disability (Lemons, 2010) and (Chapman, 2000)
It is important to keep the questionnaire short with only the most vital questions. The caretakers are voluntary helping us by spending their time using our product and answer our questions. We do not want to burden them or scare them off. Secondly, we think that it would be better to have a few complete and carefully answered vital questions instead of 30 questions that are answered minimally.  
To accommodate for this lack in linguistic skills there are a few things that one can do to improve communication with people with DS.
Use repitition
Show that you are pleased
Be patient
https://belovedshepherd.com/tips-communicating-with-a-person-with-downs-syndrome
Helaas is dit geen echte source maar een website maar hier staat het wel heel duidelijk in.  


Of course there are more items,  but these were the ones that we identified to be the most important and the ones that we could play into.


From the care-institutions we concluded…………..
Beste …,


Lemons CJ, Fuchs D. Phonological awareness of children with Down syndrome: its role in learning to read and the effectiveness of related interventions. Res Dev Disabil. 2010 Mar-Apr;31(2):316-30. doi: 10.1016/j.ridd.2009.11.002. Epub 2009 Nov 30. PMID: 19945821.
Nogmaals bedankt voor uw medewerking. Afgelopen week hebben u en uw cliënten onze slimme pot getest. Hieronder bevindt zich een korte vragenlijst met 8 stellingen over jullie ervaring met de slimme pot. Het invullen zal ongeveer XX minuten duren. Wij zullen deze resultaten alleen gebruiken om te beoordelen of ons prototype heeft voldaan aan vooraf vastgestelde doelen, en wat er bij een volgende uitvoering eventueel verbetert kan worden. Enkel wij als project groepje en onze supervisors zullen de antwoorden lezen en we zijn niet geïnteresseerd in privé gegevens zoals namen.  


Chapman, Robin & Seung, Hye-Kyeung & Schwartz, Scott & Bird, Elizabeth. (2000). Predicting Language Production in Children and Adolescents With Down Syndrome. Journal of speech, language, and hearing research : JSLHR. 43. 340-50. 10.1044/jslhr.4302.340.
Bij elke stelling dient u één antwoord wat van toepassing is te omcirkelen. Daarnaast is er open ruimte om uw menig te geven of uw antwoordt toe te lichten. Alle feedback is welkom, ook kritische uiteraard. We hebben liever te veel dan te weinig informatie dus wees niet terughoudend.


=Questionaire answers from a caretaker=
In order to get a deeper understanding how people with Down's syndrome would or could react to our project contact was sought with a caretaker. This caretaker has around 10 years of experience with these particular patients, this means that the answers to the questions are usefull to the project at hand. In the following text first the questions will be posed after which the answers are written. Lastly some extra pointers given by the caretaker will be mentioned.


Q) What would people with Down's syndrome need in daily life that this plant can help with?(To combat boredom for example)
'''Stelling 1)'''


A) Becoming more independant, that is a hot item at the moment. Caretakers want theur patients to be able to live as long as possible on their own.
De installatie van de slimme pot was een prettige procedure.


''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


Q) Do you think that our project can improve their daily life?
Open ruimte voor feedback over de installatie procedure)


A) Not only do plants make sure that there is cleaner/better quality of air in the patients room, but they also get thought to take care of the plant in a creative and playfull manner.


'''Stelling 2)'''


Q) Do you think that our project would need to het more funtions?
Mijn cliënten hebben meer tijd besteed met de slimme pot dan met de controle tulp.


A) Only sound might not be enough, it can become quite noise in care homes. But these patients also react very well to a combination of visual and auditive stimulation. The visual stimulation does not need to be complicated, colors would suffice, so for example a yellow light means more sunlight or a blue light means more water. This way they also get a more satisfactory feeling in the long run.
''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
These patients also forget general tasks quite a bit, this would be giving water in regular intervals for example, a solution would be the use of so called 'pictokaarten' and a weekly schedule. These pictokaarten are designed to not give any confusion on the action that has to be taken and the weekly schedule gives them a place where they can easily find the tasks that have to be done on a certain day. Direct tasks, for example more sunlight, would be perfect in an visual/auditive stimulation.


Open ruimte voor feedback over de besteedde tijd)


Q) What would be the best way for our project to approach people with Down's syndrome?


A) The best way to approach them is in a positive and cheerfull way yet the message has to be simple and clear, and thank/compliment them if they performed the task well.
For our project the following 3 suggestions were given:
1. 'I am thirsty, could you give me some water?', 'Thank you, now I am not thirsty anymore.'
2. 'I am quite hot, would you mind placing me in the shade?', 'Now I am nice and cool, thank you.'
3. 'I am quite cold, would you mind placing me in the sun?', 'Thank you, now I am not cold anymore.'
What might help the patients in the long run is some sort of checklist, these already get used now to see if they keep getting a better understanding of the tasks they are performing. This checklist could ask what color lamp has  what meaning for example, this can then be excecuted with their caretaker.


'''Stelling 3)'''


==Some general remarks.==
De slimme pot voegt wat toe aan de dagbesteding van mijn cliënten t.o.v. de controle pot.  
*People with Down's syndrome have different levels of mental capabilities depending on their IQ. The caretaker mentioned that our project would work best with patients that have the same mental capabilities as 6-10 year olds. Some level of understanding is needed since we are trying to learn them to care.
*They love cables that they can see. These have to be tucked away, it might not harm them but they will pull on them.
*the site botsbegleiding.nl(teachh) can be used as a usefull source, it officially is a site for autism but the thought processes are quite the same as those we can use.


=RPC list=
''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


==Requirements==
Open ruimte voor feedback over de dagbesteding)
*The pot needs to be able to sense the moisture content of the ground
*The pot needs to sense the amount of sunlight it receives
*The pot has to be able to identify the plants' needs based on sensor input
*The pot has to be able to notify the user what the plant requires
*The pot needs to be able to hold a plant
*The pot can not harm the user via electronics or any other way
*The pot has to be waterproof for when spill accidents happen


==Preferences== 
*The pot should have a speaker to address the users in a positive and friendly way
*The pot should make minimal small talk like asking how the other person is
*The pot should tell the users what it requires "I am thirsty, could you give me half a glass of water?"
*The pot should thank/compliment the users after a task is completed.
*The pot should display a smiley face then the plant is happy
*The pot should display a watering can when it is thirsty
*The pot should display a sun when it needs more sun
*The pot should display a fire when it needs more shade
*The pot should have flash blue lights when it is thirsty
*The pot should flash yellow lights when it needs sunlight
*The pot should flash red lights when it needs shade
*The pot should alarm the user when the batteries are nearly empty
*The pot should be easy to set up and install
*
*
*
*
==Constraints==
*The electronics and the housing cannot be too big so that the pot becomes unpractically big
*The assembly of the pot cannot take more than a week to fit our 7-week planning
*The components cannot be too expensive since we are on a uni-bound budget
*
*
*
*


=Promo Video=
'''Stelling 4)'''


This video needs to be very short <100 seconds. Otherwise, people lose their attention. The goal is to clearly show what our product is, what it does, and how it looks.  
Mijn cliënten kunnen de slimme pot zelfstandiger verzorgen dan de controle pot.  


As an example, you could look to nearly every IndieGoGo/Kickstarter video. I have found a video of the LUA pot. This is extremely similar to what we have and could be a great inspiration. https://mu-design.lu/lua#super-simple-app
''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''
The hook
Your Kickstarter videos have to get their attention. If you don’t do this, nothing else matters. This could be through the video title or those first few impactful seconds that draw the person in to learn more.


'''Tell a memorable story'''
Open ruimte voor feedback over zelfstandigheid)


Your video should tell a story. If you are trying to get funding for something that solves a problem. The problem should be demonstrated through a visual narrative. Stories hold attention. They show rather than tell. People want to find out what will happen next. Work the narrative to hold attention to the very end. And after the viewer walks away, they should be left with an imprint, an inability to forget what they just saw, and hopefully and urge to share.


'''Get people excited'''
'''Stelling 5)'''  


Yes, you are very excited about the movie for which you need funding, but is this excitement translating to someone who knows nothing about you. What is unique and special about your idea? Why should the contributor want to be a part of your mission? And don’t underestimate the power of music to inspire excitement.
Omdat de slimme pot zelf de cliënten aanstuurt, heb ik meer tijd over voor andere zaken.  


'''Make sure visuals match the script'''
''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


If you reference a mouldy cheeseburger in the script for some strange reason, we need to see one. The visuals need to synch to what the actors are saying to reinforce your message.
Open ruimte voor feedback over de tijdsbesparing)


'''Don’t over-explain it'''


You don’t want to be too vague. People should know what they are funding and need to know that you have a plan. But a lengthy video that explains every detail of the process will not serve you well. The most successful videos are concise 2-3 minutes.
'''Stelling 6)'''


'''The smart pot video script: LET OP DAT DE VIDEO IN HET NEDERLANDS MOET VOOR ONZR DOELGROEP'''
Mijn cliënten vonden het gebruik van de slimme pot leuker dan van de controle tulp.


In the first shot, we immediately introduce the smart pot to gain attention and show what it looks like. “Introducing the smart pot, a system design to make taking care of plants easier and more enjoyable”
''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


Stock footage of a down person caring for a plant. “Everybody should be able to care for plants. Either as a hobby or a way to create a nice atmosphere and clean air. Some people just need a little help”
Open ruimte voor feedback over het gebruiksplezier)
Footage of our pot. “the smart pot helps by monitoring its own state and giving clear commands via multiple channels to make taking care of plants easier for people who struggle ……………’’ 


Closeup footage of the sensors if that is possible/visible. “the smart pot uses sensors to monitor the plant's environment and determine the health and requirements of the plant”


Footage of the lights and display “the smart pot contact its users via voice, lights and display. And uses these simultaneously to make it as clear as possible what has to happen”
'''Stelling 7)'''


Footage of happy Downies “After a completed task the users is met with positive feedback”
Het gebruik van de slimme pot wekt zorgzaam gedrag op in mijn cliënten t.o.v. de controle pot.


==Discussion==
''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


During such a project there are always things that could have gone better. Some of these things were anticipated and others were not. This section is dedicated to the things that went suboptimal, and how we would improve a second prototype.
Open ruimte voor feedback over zorgzaamheid)


The first big problem that we encountered had to do with our target audience, namely people with down syndrome. In order to obtain user “preferences and needs” we needed information from these people. Although Down syndrome is not a rare disability (1 in 800 births in the united states SOURCE), we personally do not have contact with anyone suffering from this condition. This is because these people generally have fewer social contacts. So we tried getting in contact with care institutions. This was quite hard since these caretakers told us that they have busy jobs and people generally dislike spending time helping complete strangers when they are busy. Another factor that did not help is that the caretakers are very protective of their clients. Since the clients themselves are not able to properly fend for themselves. Lastly, the coronavirus made it impossible for us to visit these places in real life.
So in another project, we could think of better ways to get into contact with our target group (or decide upon an easier one during the first stages of development). 


Another problem we encountered had to do with our goals and experiment. As a goal, we aimed to add a new joyful activity to the day of people with Down syndrome. The main problem here is the measurability of these results. Due to the coronavirus, we could not be present in persons to judge the effectiveness.  And due to the privacy of the users, we also could not install camera’s for example to keep track of how the prototype performs. The result of this is that we had to ask the caretakers to pay attention and all the feedback had to come from questioning those caretakers. This is less than desirable because we want to ask as little as possible from these people since they are already being extremely friendly and helpful by testing our product. Secondly, it increases subjectivity in the results since both prototypes are judged by different observers.
'''Stelling 8)'''
This could be solved by perhaps waiting until covid passes or by finding a different target audience that allows us to monitor the experiment ourselves.


An additional problem of the experiment was the test period length. Due to the structure of this course, we could only permit 1 week of testing. This is really short when you want to monitor potential changes in behaviour and the health of plants. Expected changes are minimal in one week, and therefore the results might be inconclusive. We have no good fix for this.
Mijn algemene ervaring met de slimme pot is positief.  


The next thing that we would improve in a new version would be the design of the pot and how the sensors are placed inside. In the current design, the moisture sensor fits into a hole that is halfway down the pot. This was the only way everything would fit in the pot. Making the pot bigger was not an option since we were restricted by the size of the 3d printer and the print time. This low hole caused excess drained water to drip through the hole in the direction of the electronic core. This is obviously a problem. In the prototype, this was fixed by using some tape. But a more ideal permanent solution would be to redesign the pot with a bigger 3d printer. Or by using moisture sensors that are smaller since our model was quick large (8ish cm in length.)
''Sterk oneens // Oneens // Neutraal // Eens // Sterk eens''


FLEUR now uses a powerbank as the source of power. We didn’t like to option of having a power cable since that would look less nice and would increase the risk of electrocution because we use electronics inside a flowerpot that is filled with water every week (and see the problem of the hole described above). The downside of using a battery is that you have to swap or charges them once in a while. So to minimize that labour and make our system more durable we should use power-efficient component. In the current design the display of the mstack 5 core uses most of the power (XX Watts), our sensors take a measurement once every XX minutes {{and after the button is pressed, to ensure fast feedback}}. This power consumption is negligible in comparison. So to improve our design and make it run on smaller and fewer batteries we could swap the standard transmissive display for a so-called reflective display, these are the ones that are used in e-readers. These displays only use energy when the projected image on the screen has to be changed. Which is only a handful of times a day in our case. This would increase our average power consumption from XX watts to XX watts, allowing for smaller batteries.
Open ruimte voor feedback over de algemene ervaring)

Latest revision as of 22:48, 20 June 2021

Group members

Members Student ID Faculty E-mail
Marijn Borghouts 1449532 BMT m.m.borghouts@student.tue.nl
Bert de Groot 1459597 ME g.d.groot@student.tue.nl
Nando di Antonio 1465325 ME n.z.d.antonio@student.tue.nl
Dorien Duyndam 1305107 EE d.a.duyndam@student.tue.nl

Subject of this project

The following concept was the basis on which we started designing. (Of course, things change during development when new insight or limitation come to light. But this is normal when designing a larger project and it shows that we have learned new things, based on which adaptations are made.)

The idea is to create a smart plant system that notifies the user if the plant needs more water or more or less sunlight. The target group is a social workspace or carehouse for mentally disabled people, Down syndrome in particular. These people can see or hear when a plant needs attention and get that plant what it needs. The mentally disabled will therefore do something useful (taking care of plants) which is valuable to them and the surroundings. The caretakers in this social workspace will also get work relief because of this system because they don’t have to tell the impaired person what to do with the plants anymore. The plant pot will probably get a nice face so that it looks friendly. It will need water sensors implemented in the soil and light sensors around the plant to monitor the amount of light the plant gets. The pot will also give positive feedback when given water or sunlight.

Approach

In order to realize this idea, a well-structured approach need to be made and followed. First a schedule and a plan was made together with a global task-division, the plan, task-division and logbooks can be found in Appendix A. Then the goals were defined to make sure we had something to work to. To broaden our perspective of our target audience we did literature study on several subjects, from articles of the state-of-the-art, to information on plants and their effects on humans and of course articles on our target audience: people with Down Syndrome.

The next step was to make analyze whether our idea had purpose for user, society and enterprise and how to improve our idea on their needs and preferences. When we had a clear vision about the goals and the target audience the technical part could begin. We had to make a list of requirements, preferences and constrains of our idea and future-prototype so that we could finally start building it.

Before the actual assembling, a list of electrical components needed to be made as well as a design for the housing, software and hardware. So that finally the hardware would be ordered and assembled, the housing could be printed and the software would be coded and thus the prototype could be made.

Parallel to the technical part, we still needed to test whether our design in the end would have the effect on the user, society and enterprise as we wanted it to have. We decided that the user was the most important of those three and thus we contacted actual care houses if we could place our prototype in their house for a few days or a week to see whether our design would have potential for a real manufactured product.

We needed to address also the enterprise-part of the process in order to gain publicity. In the first place this was necessary for us to convince care houses that our prototype was worth testing. However, in the second place, in a real assemble process, you need costumers and sponsors before the prototype can actually be made.

The point came where we finished assembling two prototypes and we had found two different care houses where we could test our prototype, now named Fleur. Therefore an experiment was set-up and a hypotheses must be written. After the test week, the results needed to be processed and a conclusion and discussion on the test and on the whole process should be made. And last but not least the presentation to our colleagues and tutors must be prepared and given.

Every step of the way will be discussed in much detail in this Wikipedia page.

Goals

To make a successful project and in the end prove that the design was successful (or not), we need to define clear and measurable goals. Besides this, we need to think about how the achievement of these goals will be proven.


Our main goal is to add something to the daily lives of people with DS. We want to give them a way to spend their time, and give them something to care for. Interacting and caring for the plant should be a hobby, something that they enjoy doing and spending time on. This is a beautiful idealistic goal that improves the wellbeing of these people and can therefore be marketed as a healthcare product that could even be covered by healthcare insurance.

This can be measured by keeping track of how much time is spent interacting with our pot compared to a control plant that does not have our systems attached to it. Secondly, we can question the users about their overall experience with our product. We do this by asking the users to rate individual aspects of this product on a 5 point scale as an improvement over normal plants? This way we get a quantitative measure of what our system adds to the weekly routine (time and enjoyment wise).


Our second goal is to improve the independence of the users with DS and teach them how to care for something. Our product provides routine and clear simple instruction. This will help the people with DS to take care of the plants themselves without any external help from caretakers. This improves their independence which is a trait that is heavily valued by the caretakers we interviewed. When these people become more independent they require less care and gain more freedom, which improves their quality of life. Secondly, this product will develop the skill to care for something. This is a useful skill for people who need care. If you teach these people basic caring skills they can help themselves and each other better.

Testing the increase in independence and caring skills from 1 week of usages will be difficult since changes are expected to be small and these characteristics are not so simple to measure. Hence this will probably be assessed by the caretakers who will be present during the testing stage.


Our third goal is to remove some workload from the caretakers. We know that it is not always easy to work in the (health)care sector and especially with the covid-19 situation the pressure on these people is high. If our product manages to independently keep the people with DS occupied, it will mean more free time for the caretakers to spend on others work or just relax a bit so this goal ties in with the second goal.

This can be tested by comparing the time a caretaker spends on helping these people take care of normal plants VS the time spent installing and explaining our product. If our product proves to be too complicated to use, we can get feedback from the caretakers that it took too much time and energy to adapt to the new system and that it was not as independent as we had hoped.


Our fourth and least important goal is to improve the health of the plants. Having healthy plants benefit the air quality and the overall look of a space. Secondly, it is nice if the care institution has to less regularly buy new plants, this saves time and money (which are already scarce resources).

This can be tested by starting off with two plants of the same type and health. One will be the control plant and the other will be planted in our pot. Both will be placed in the care home. After the testing period, the health of both plants will be assed. We do realise that assessing plant health is a bit subjective and that the sample size is really low, but we have to make do with what we can do in the restricted time and budget. It is also interesting to note that a smart pot that improves plant health is also an interesting product for the agricultural sector and greenhouse industry, seeing how dutch farmers need to produce with high efficiency to compete in the market because of the high prices for ground.

Objectives

Besides these goals, we also defined the following more practical objectives to strive for.

Cost efficient/Affordable

The prototype should make optimal use of the available resources. Furthermore the components and assembly process should be as cheap as possible to reduce the total production cost, making the design cheaper for users (or obtaining a bigger profit margin for the vendor)


Easy to use

The prototype should be easy to install and operate. This is especially important considering the target audience of mentally handicap people. This product is designed to help these people with doing more complex tasks. If the operation of the product is not extreme straight forward it will only work counter effectively.


Friendly/Positive reinforcement

We want the product to interact nicely with the user. The product should communicate with the user in a friendly manner and compliment the users when they perform an action. This makes the product more pleasant to use. The explicit positive reinforcement confirms to the mentally disabled people that they are in fact doing a good job.

Deliverables

  • The first deliverable will be this wiki page. It logs our progression and helps the tutors and other people with an interest in our project to follow the progression and developmental steps of the project.
  • The second deliverable will be 2 physical prototypes of our smart plant pot.
  • The third deliverable is the final presentation, in which we present our project to our teachers and peers.

Literary study

In order to gain broader perspectove on the field of plants, the effect of plants and people with Down Syndrome, we needed to do much literature study. in the last chapter before the appendices, a list of sources is present of the articles we read to gain this knowledge.

USEr analysis

This anaylysis of user, society and enterprice is made based on literature study as well as contact with caretakers of mentally disabled people among which people with Down Syndrome.We sent out an email with a questionnaire for hypothetical use. The mail together with the statements we asked to the caretakers and the results of those are given in appendix B. Next to the several emails we send to multiple carehouses, we held close contact with a specific caretakers that one of us knows personally. The result of the interview with the latter care taker can be found in appendix C.

User

The main target group for this product is people with a mental disability. The product is designed to help the users overcome some of the challenges that they face due to their disability. "Mental disability" is a very broad term and can out itself on a whole spectrum of problems, ranging from difficulty with speaking to recognising emotions. For the sake of making a more tailored product, we have decided to focus on people with Down syndrome. This decision allows us to gather more specific needs and requirements from the users (which can be found in its own section). Our robot will notify the user by speech when a plant needs more or less water, or more or less sunlight. This way the product helps the user take care of a plant without having to do complex tasks like remembering when and how often a plant needs water or sunlight. Our robot gives simple, chopped up clear instructions so that the user knows what is being expected from him/her. After a task is completed, the robots will give confirmation in the form of positive feedback to the user. This helps assure the user that a task has been successfully completed. This way our product makes caring for plants more accessible for people with Down syndrome. which has all types of benefits [11], [12], [13], [14] The secondary users are the caretakers. The product is meant to be used by people with Down syndrome but is meant to be bought and installed by the caretakers. This device helps relieve workload from the caretakers by automating a part of the managing and task distribution process in a social work environment. Therefore it is important to always be mindful of who the users of specific functions is and what their needs and capabilities are.

User Needs and Preferences

People with Down syndrome have different needs and preferences compared to people without intellectual disabilities. A good product should address all of the user's needs and as many possible preferences. So in order to develop a good product one should have a clear idea of what these needs and preferences are. To gather this information we have called several care institutions asking them if they would be interested in helping us answer some questions and/or help test the first prototype. Secondly, we decided to also do a literary study into this subject to obtain even more information from other sources. From the literature, we have found that language development is moderate to severely compromised in some children with DS and that therefore most individuals with DS also have less developed language skills at all ages in life compared to people without an intellectual disability (Lemons, 2010) and (Chapman, 2000) To accommodate for this lack in linguistic skills there are a few things that one can do to improve communication with people with DS. 1)Use repetition 2)Show that you are pleased 3)Be patient.


Of course, there are more items, but these were the ones that we identified to be the most important and the ones that we could play into. We also made a questionnaire which we sent to multiple care institutions, from the results we concluded that it is very important to call the attention of people with the syndrome of down via multiple channels. For example with sound, display on the screen and blinking LED lights, because it might be hard to hear something in a very noisy room. The most important approach to these people is being positive and cheerful and to keep the message simple and clear. It is very important to remove cables from sight, they love cables and seeing what happens when they pull on them.

Society

Some say that a society is measured by how it treats its weakest members. We realise that our product will not solve any world crisis or drastically improve the farming capacity of social workspaces, but it helps people who need a little bit more care. Our robot allows people with Down syndrome to perform work more easily and giving them a way to spend their day and make themselves (somewhat) useful. This benefits society by allowing better participation across all layers of society and show empathy and care towards those who need it the most. Secondly, this helps relieve some of the workload of social caregivers who are often overworked. Financing for this sector is generally low and our product might save some valuable time by automating some simple repetitive tasks.

Enterprise

This product of course has to be developed and manufactured. This creates jobs and potential revenue which is all good for the economy. Products of these types do already exist [1], [2], [25] but these are mainly focused on increasing greenhouse yield. This product has a different goal and is therefore unique enough to not have to deal with fierce competition in the market, giving it a fair shot at succeeding in our opinion.

Branding, themes, and names

A good marketable product needs a brand name. With its own name, customers can more easily refer to your product and you create a more memorable experience. After a good reputation has been established your brand name can help sell other products since people know they can expect quality products from a reputable brand. Lastly, branding helps to set your product apart from competitors. There are entire studies and companies that solely focus on branding and marketing. Branding is not really an area on which we have decided to spend our limited resources for this assignment. However, we did brainstorm on some names and themes for our smart plant pot. We have concluded that theming the pot was unnecessary for this prototype. We considered giving it a pop-icon theme that would be recognised and liked by most users, but this very quickly leads to problems with copyright. Secondly, we feared that theming the pot would take away attention from the display and lights that the pot uses to gain the attention of the users in its surroundings. Thirdly, we thought that the caretakers might prefer a clean white design as opposed to a spiderman-pot with a tulip in it. The caretakers are the ones who have to purchase and install the system, so their preferences are also of interest. For the name of the product, we have considered a few options. In the end, we have decided to go with FLEUR. This is a common Dutch name that is easy to remember and pronounce. FLEUR is a name derived from words for flower or flowering, we found this to be fitting since our product is designed to house a plant, of which many have flowers.

RPC list

Before the actual assembling the system needs a design. To clearly have an idea of a good design it is important to have a list of requirements, preferences and constraints, in short RPC-list.

Requirements

  • The pot needs to be able to sense the moisture content of the ground
  • The pot needs to sense the amount of sunlight it receives
  • The pot has to be able to identify the plants' needs based on sensor input
  • The pot has to be able to notify the user what the plant requires
  • The pot needs to be able to hold a plant
  • The pot cannot harm the user via electronics or any other way
  • The pot has to be waterproof for when spill accidents happen
  • The pot has to be strong enough to withstand being moved around. This being gently or roughly.

Preferences

  • The pot should have a speaker to address the users in a positive and friendly way
  • The pot should make minimal small talk like asking how the other person is
  • The pot should tell the users what it requires "I am thirsty, could you give me half a glass of water?"
  • The pot should thank/compliment the users after a task is completed.
  • The pot should display a smiley face then the plant is happy
  • The pot should display a watering can when it is thirsty
  • The pot should display a sun when it needs more sun
  • The pot should display a fire when it needs more shade
  • The pot should have flash blue lights when it is thirsty
  • The pot should flash yellow lights when it needs sunlight
  • The pot should flash red lights when it needs shade
  • The pot should alarm the user when the batteries are nearly empty
  • The pot should be easy to set up and install

Constraints

  • The electronics and the housing cannot be too big so that the pot becomes unpractically big
  • The assembly of the pot cannot take more than a week to fit our 7-week planning
  • The components cannot be too expensive since we are on a uni-bound budget
  • The pot cannot be too big in order to fit the manufacturing process due to the limited 3D printer size available to us.

Electrical components

Electrical circuits

A design for the electrical circuit was made in the first phases of the designing process, See figure 1. When definite decisions about the hardware were made, a second reviewed schema was drawn, see figure 2.

Figure 1: 1st design of electrical circuit
Figure 2: 2nd design of electrical circuit

BoM

Component Costs Amount Total costs Link to webshop
Earth Unit € 4,- 1 € 4,- https://www.tinytronics.nl/shop/nl/platforms/m5stack/unit/m5stack-earth-unit
Light Unit € 4,- 1 € 4,- https://www.tinytronics.nl/shop/nl/platforms/m5stack/unit/m5stack-light-unit
M5STACK M5Core Gray - ESP32 Development Kit € 30,- 1 € 30,- https://www.tinytronics.nl/shop/nl/platforms/m5stack/m5core/m5stack-m5core-gray-esp32-development-kit
DuPont Jumper wires Male-Female € 0,75 2 € 1,50 https://www.tinytronics.nl/shop/nl/kabels/prototype-draden/dupont-jumper-draad-male-female-20cm-10-draden
M5Stack NeoPixel LED strip € 10,49 1 € 10,49 https://www.conrad.nl/p/makerfactory-m5stack-neopixel-strip-mf-6324774-led-lamp-met-connectoren-malefemale-35-v-23-cm-na-tape-cut-2108258
Material 3D printed pot and box € 17,50 1 € 17,50 https://www.filamenten3d.nl/product/pla-filament-hotorange3d/

In the prototype, the wires were not connected correctly. This problem can easily be solved by adding an M5STACK 1-6 PaHub Unit. This unit costs around 6 euros and one of them is required for each design. This will end up with a final price of € 67.49 For every ‘Fleur’. In this project we made two prototypes, the final amount of money used for this course is, therefore, € 134.98.

Software

The first thing Fleur will do when she wakes up is checking her values from the sensors. She will check the humidity value is in above a certain threshold of humidity and check whether the light sensor detects a certain value within the right range.

If everything is alright, the screen will show thumbs-up and the text that she is doing alright. She will then be put in a rest-situation and wait for half an hour for the next check. The time delay of thirty minutes was chosen, because if Fleur asks for attention more regular she would be very irritating. However, if the caretakers and the clients didn’t notice Fleur asking for anything and the system would wait any longer, it could be harmful.

Considering the situation that during the check anything irregular would occur, like the plant needs water, or it wants more or less sun, Fleur will ask for attention by singing a certain tone and shine red LED-light. Depending on the situation, the screen will print the exact question the system has and a corresponding picture. In the case that the plant needs water, the screen shows a droplet-symbol. In case of the need for sun, a sun-symbol will be shown and if the plant wants shadow, a cloud-symbol will be visible. Moreover the combination ‘more-sun-more-water’ and ‘less-sun-more-water’ are situations the system can ask for.

The symbols and question for the needs of the plant will be visible until the system detects that the plant has been given the proper attention. Therefore after helping Fleur (or if the user wants a direct update of the current situation), the most-left button should be pressed. By pressing that most-left button, the system will do an instant quick check of the sensors.

At night, the system can be put manually to deep-sleep mode for 12 hours by pressing the middle and right-most button simultaneously. This is chosen because this way the system will not go to sleep-mode accidently for 12 hours.

Below a flowchart of the code is drawn for a better overview of the code.

The full final code (in a word document) can be found using the following link: https://drive.google.com/drive/folders/1F2kOWIv5RVl4_EYyO0mUUrJ0aGCaT1-m

Flowchart of the code

Flowchartfleur.jpeg

3D-printing

When the idea of FLEUR came to enhance the joy of life of mentally disabled people, some challenges had to be overcome in the design phase of the prototype. As can be read in the section about the conversation that was held with a caretaker, all the wires have to be hidden away. Apparently, these wires are an incentive for the patients to pull on them, this may lead to dangerous situations. Besides this, there was a constraint for the size of the product. The size could give problems during manufacturing but the product can also become too large to be practical in use. There were many more challenges to overcome, these can be read below.

Making the prototype housing

When it came to deciding on how we would make the prototype, a decision was made quite quickly. The method of 3D printing was chosen. This was a feasible solution since one group member owns a 3D printer and thus it was very forgiving in lead/shipping times. And when problems would start to arise, this was a process that could be done at the university. For the whole process, a 3D design of the pot had to be made, this process can be read below, and also research had to be done on the plastics that were going to be used for the FDM printer. After the print was completed some post-processing had to be done before FLEUR was ready to be assembled.


Research on plastics

When doing research on the plastics there were only 3 possible solutions for the printer set-up at hand. Some plastics had to be discarded since they would be too abrasive, some were discarded due to their properties after printing, some were discarded if the manufacturing process could not be met, there is a limit to the temperature the printer can reach, and some were discarded due to the fact of limited to no stock being available. What plastics remained? The 3 most common 3D printer plastics on the market: PLA, PET-G and ABS. They all have their own strengths and weaknesses and these will be elaborated on further.

PLA [20]

PLA is the most commonly used 3D printer filament due to its versatility. PLA is easy to print since it does not tend to warp1 and/or cause stringing2 during printing and it is relatively strong, it is available in many colours and it is very easy to work with during post processing. It also does not require high temperatures during printing. And one other side benefit is that PLA is biodegradable. On the other hand, PLA is not the strongest material on the market, but this is not that much of a concern for our project. What is of concern are the properties PLA has when it is in contact with sunlight and water. Since PLA is a bioplastic it is not hydrophobic for longer periods of time nor can it be in direct sunlight for longer periods of time. This seems catastrophic but while doing the research it was found that 'for longer periods of time' means more than 2-3 months. For this project the use will be around 1-2 weeks at most. Lastly it is needed to mention that PLA deforms at not the highest temperature, ~50-60C, it will not melt but the when applying pressure indentations and/or layer separation could occur.


PET-G [20]

PET-G is the little brother of the engineering plastic PET, PET is used for example in water bottles. PET-G is a ductile material, it is a hydrophobic material by itself, this does not mean that the print will be waterproof however, it has a good resistance to sunlight, it is relatively easy to print and it starts deforming at a temperature of ~70-75C. Some disadvantages are that PET-G is prone to cause stringing during printing and it is more inclined to warp than PLA, but these are minor issues with PET-G. The biggest problems with this plastic were two fold. The first major problem was availability, the source that was used to acquire the plastic only had 1 roll in stock and we needed 2. The second problem had to do with the print bed that was being used. The print bed is made of glass with a special coating, while printing there is a significant chance that the PET-G could fuse with the glass of the print bed. A solution would be a PEI sheet for the printbed but this could not be acquired in time.


ABS [20]

In general, is ABS the most ductile material of the 3. ABS is also very heat resistant, it starts deforming at a temperature of ~100C. But there are some major disadvantages. First of all, ABS is not the most resistant to UV light, in this aspect it has about the same properties as PLA. But the biggest drawback to ABS is its tendency to expanding and/or contracting during printing. This means that the print is not only very inaccurate, the tolerances are not met due to the expanding/contracting of the material, but it is also hard to make 2 3D printed parts that would need to interact with each other.

Conclusion

So what material was chosen to use for the 3D printing? The answer is PLA. It was readily available, it does not have the best properties but also not the worst. The only thing that might be a small concern is that it can deform at around 60C, this would be a problem when the pot is placed above a radiator of the central heating system when it is cranking out a lot of heat. But since the prototype is made during late spring/ early summer this would not be a problem. Also, since this project will use the pot for 1-2 weeks, it is no problem that the pot will start to break down after 2-3 months in continuous sunlight or being used as a water reservoir for that amount of time.

1) Warping is the tendency of a material to deform when it is being cooled. This can lead to structural inaccuracies, parts not being able to merge together for example.

2) Stringing can happen with certain 3D printers during printing. Thin lines of plastic are dragged across the part during manufacturing resulting in an end result that needs more post-processing in order to get a nice finish.

Post processing

After a print is complete, it is likely that some post-processing has to be done. In our case this meant removing the support material, doing some finishing to the pot and making the pot waterproof. These processes are elaborated on below.

Removing the support material

When making a print like this it is important for the person managing the 3D printer to keep the orientation of the parts in mind in the slicer software. This can in turn greatly reduce or increase the amount of support material that has to be printed. Support material is sacrificial plastic that is used to make sure that the print can be made by the printer, this then can be easily broken off in the post-processing phase. In general this support material can be avoided by making some smart design choices as well. A 60 degree overhang for example is the most aggressive form that most printers can handle without printing any support material. This step is crucial in minimizing the amount of plastic that is used and in keeping the print time as low as possible.

Finishing

Now that the support material has been removed, the tedious work of finishing the parts begins. In general, a 3D printed part is quite smooth and has a nice look to it, but there can be some oozing on the side or the seam is visible to the outside. These are both the effect of the way an FDM printer works. Since the printer works in layers, the starting/end point of a layer gets over extruded plastic, or a seam, this can be filed down and sanded to match the rest of the print.

Waterproofing.

The last process would be waterproofing. Unlike some test prints, the pots were not completely waterproof. This was fixed by using a 2 part epoxy, this would ensure that the flower pot would not leak.

Designing the prototype housing

First design

When coming up with a design the first thought was to make a flower pot comprising of 2 compartments, 1 compartment for the electronics and 1 for the plant, see Figure 3. The idea was that the bottom compartment would be filled with all the electronics and the top compartment would function as a flower pot. The moisture sensor would stick up into the flower put and the light sensor would be sticking out of one of the compartments in order to sense light. In the end it was thought to be too difficult to make the flower pot water tight with a sensor sticking in from the bottom. This could be avoided with a designated rubber seal, but then still it would not be an ideal solution. Another hinderance with this design was its size, it would only have a couple of mm of clearance during manufacturing.

Figure 3: First design implementation.

Second design

Learning from the design faults in the first iteration of the design sketch, a new concept was thought of. The main concept would remain the same, there would be 2 compartments. 1 compartment for the electronics and 1 compartment for the plant. The main difference between the first and second iteration of the design lies in the way how these compartments interact. Instead of making a sort of lid on a jar concept, the compartments would be 'merging' together. As can be seen in Figure 7. The 2 compartments for the design will be explained separately. This design was also used for the 1st prototype of FLEUR, during assembly of this prototype some minor design changes were made for the 2nd prototype.

The top compartment.

The top compartment of the design has multiple functions, it has to hold the plant, it holds the sensors, the LED strip and it makes sure that the least amount of water can get to the bottom compartment. The design can be seen in Figure 4. In order to hold a plant and to make the design waterproof was quite challenging since the chosen manufacturing process was a 3D printer. When looking online how it could be done with the settings in the slicer software an article was found by a company called Prusa Research[XX], a leader in consumer 3D printers. This article stated that it would be possible with certain parameters but even then all the stars would have to align. When these parameters were changed, the end result was that the print was not waterproof. In the end, it had to be done during post-processing. As far as holding the plant itself was quite simple, a plastic flower pot from a retailer was used as an insert into the compartment, this way there would be an extra layer of protection between the electronics and the water. This also has the added benefit that changing a plant is a simple process, the inserted pot has regular dimensions, meaning that plants in similar pots can be found at retailers. But this is not necessary, some soil can be put in the compartment for the flower and FLEUR would still function as intended. For the sensors, cut-outs have been made. For the light sensor, a cut-out in the top was made so it can sense the amount of light. The placement is opposite to the screen, this was done for ease, the sensor would be able to sense sunlight through a window and then the screen would still be pointing towards the room. For the moisture sensor, a cut-out had to be made through the potholder. This gives the risk of compromising the waterproofing but this compromise had to be taken. As mentioned during design 1, all the cables had to be out of sight whilst trying to avoid making any holes in the bottom of the potholder. Thus it was chosen to make the hole in the side of the potholder, and the hole is placed under a 30-degree angle. The thought process being that the water on the sensor itself would follow the path of least resistance and pointing the sensor down would lead the water down giving the least amount of problems. The holes for the sensors are meant to be press fits, meaning that no adhesives or fasteners will be used. This is why they are designed to be as big as the dimensions of the sensors, with the tolerance clearance for the printer being ignored, this gives a hole that is slightly smaller than the sensor(+- 0.2mm) giving the chance to make the fit perfect with some files. If the fit turns out to be too loose, a piece of tape will be used as a gasket. Ideally, a rubber O-ring would be used but that is not feasible, unfortunately. Besides the sensors, also a designated spot has been chosen for the LED strip, this is a simple track in which this strip can be placed.

Figure 4: Top compartment second design

Article Prusa research: https://help.prusa3d.com/en/article/watertight-prints_112324

The bottom compartment

The bottom compartment needed to hold the M5Stack Core along with the powerbank and all the cables. And it had to give strength to the whole design. The design can be seen in Figure 5 When it came to holding the Core several cut-outs were made in a wall of the bottom compartment. Some cut-outs held the Core in place whilst others were there to accommodate for the cables that needed to be connected to the Core. in order to hold the screen in place, there is also a design feature at the back. This is a slot that fits around the BUS unit that is directly connected to the Core, this will neutralise movements in the horizontal-plane. Limitations in the vertical-direction are achieved by a combination of these cut-outs and this design feature. These can be seen in Figure 6. There is enough room to accommodate 1 of the 2 power banks that were used during the design process, there is no particular orientation that these need to have.

Figure 5: Bottom compartment second design
Figure 6: Bottom compartment second design, showing the cut-outs for the Core and all the wiring

Put together

When both compartments are put together, there are 2 prongs in the top compartment and there are 2 holes in the bottom compartment. These holes and prongs limit the movement in the horizontal-plane, movement in the vertical direction will still be possible however, this was done to make it easy to charge the powerbanks if needed and to do repairs.

Figure 7: Second design put together
Figure 8: 1st prototype
Figure 9: 2nd prototype

The prototypes

Also, 2 prototypes were made. One in white, the first prototype, and one in red, the second prototype. There are small changes between the 2, when putting prototype one together some minor mistakes were found in the design and these were changed for prototype 2. These changes were the length of the track for the LED strip and the height of the design feature for holding the BUS unit of the Core.

Promo Video

A promotion video was made in Kickstarter style. This video is useful for the final presentation, to convince the target audience that they needed to test our prototype, and to buy our product (enterprise). This video needs to be very short <100 seconds. Otherwise, people lose their attention. The video should clearly show what our product is, what it does, and how it looks.

As an example, you could look to nearly every IndieGoGo/Kickstarter video. The following guide for making a video was found online:


The hook

Your Kickstarter videos have to get their attention. If you don’t do this, nothing else matters. This could be through the video title or those first few impactful seconds that draw the person in to learn more.


Tell a memorable story

Your video should tell a story. If you are trying to get funding for something that solves a problem. The problem should be demonstrated through a visual narrative. Stories hold attention. They show rather than tell. People want to find out what will happen next. Work the narrative to hold attention to the very end. And after the viewer walks away, they should be left with an imprint, an inability to forget what they just saw, and hopefully and urge to share.


Get people excited

Yes, you are very excited about the movie for which you need funding, but is this excitement translating to someone who knows nothing about you. What is unique and special about your idea? Why should the contributor want to be a part of your mission? And don’t underestimate the power of music to inspire excitement.


Make sure visuals match the script

If you reference a mouldy cheeseburger in the script for some strange reason, we need to see one. The visuals need to synch to what the actors are saying to reinforce your message.


Don’t over-explain it

You don’t want to be too vague. People should know what they are funding and need to know that you have a plan. But a lengthy video that explains every detail of the process will not serve you well. The most successful videos are concise 2-3 minutes.


Our video can be viewed on youtube via this link https://youtu.be/aYFWqo6niwQ

The test

Finding test locations

In order to test our 2 prototypes we needed two care institutions who were willing to test our product. This was hard since the caretakers are generally very protective of their clients. Covid-19 probably also played a role. We as students are statistically the most infected part of the population. Getting a corona infection inside a place filled with disabled people would be terrible. But eventually, 2 respondents from our general questionnaire agreed to test Fleur. After this, a phonecall was setup to discuss practical details and to make sure that these people knew what was going to happen and what we expected from them. Below is the contact information for the persons that agreed to test Fleur.

We will not post the contact information on this wikipedia page since we do not have their explicit permission to do so and it will be an invasion of the privacy of the people who were so willing to help us.

Experiment

To test whether our smart pot achieves the stated goal we will perform two simultaneous tests that are one week long. For each test, we will need two similar plants that are in similar health. The plant that we have chosen for this experiment is a tulip with a bulb. This was done because 1) they are available in this spring period. 2) They are flowers so we expect them to show relatively large changes over the short testing period of one week, e.g. they will hopefully bloom 3) Because they are flowers we hope that the caretakers and the clients like them. 4) The blub prolongs the life of the tulips compared to cut flowers. This way we want to prevent the tulips from dying naturally within a week. 5) bulb-in-pots need a bit of water once or twice a week. So the clients actually need to water the plants within that week. 6) Tulips require sunlight but not full sun. This is a bit more interesting in terms of programming our software and using the sensors.

In the experiment, one plant will be placed in a regular pot and will serve as a control. The other plant will be placed in our smart pot. Both plants will then be placed in similar environments, with the same temperature and amount of light, but in different locations (as to not trigger care for the control plant by association with the smart plant). Then the caretakers will introduce the people with DS to the plants and the smart pot and tell them that they have to care for these plants during that week. The caretakers also mention that one plant is a magical talking plant and that it can communicate if it needs something so that the clients will not be scared or too confused.

We know that one week is a very short time span and that a sample size of just 2 plants is small but we have to work with what we have. After the test period, we will assess the health of both plants to see if one is in better health than the other, suggesting the smart plant influenced the wellbeing of the plant. Due to the situation with Covid-19 we are not allowed to enter the care-houses in person. And due to the mental vulnerability of the clients, their privacy, and the fact that we are strangers to them, we are not allowed to set up a webcam feed to more scientifically measure some parameters like: time spent with the plant. Therefore we will gather results by questioning the caretakers (and the clients indirectly). The results from the two parallel tests will be combined while paying attention to any possibly interesting similarities and differences. From these combined results we will be able to judge whether our product achieved the goals we set for it, and what still needs to be improved.

Hypothesis

We expected that we will achieve our main goal of helping people with Down syndrome to have more ways to spend their time in a joyful manner, that is why we decided on this design. We are fairly confident we will reach this prioritized goal when the design experiences no malfunctions during the testing period. This concretely means that the caretakers will rate the “time spend” and “enjoyment” in the questionnaire higher for our smart pot than for the control plant.

Our second goal is to take some workload from the caretakers. For this, we expected a negative result but that is due to an unresolvable flaw in the design of the experiment. We hypothesize that the installation process adds extra workload, and so does the becoming accustomed to using the product. We expect that the clients will need some time and guidance from the caretakers when using the smart pot for the first few times. However, we do expect the workload to drop after the product has been fully integrated. Therefore we will also ask the caretakers if they foresee a reduction in workload if the smart pot were to be used longer than a week, say a month. For this, we do expect a positive answer.

Our third goal is to help the client become more independent and caring. We expect that these characteristics will be hard to measure with such a small sample size and test time. But we might be wrong. It could also be the same that some clients quickly develop a caring fondness for FLEUR. This again will have to be rated by the caretakers. We expected to measure some degree of increased independence. An increase in independence is defined as a report by the caretaker that the clients get activated by our system to perform a task that they had forgotten in the control plant.

Our final goal was to improve the health of the tulip. For this, we expect an inconclusive result. We think that there will be no significant change between the control plant and the smart pot in one week, even if the control plant gets no care at all. On the other hand, it could also be the case that our plant model is not ideal or if the instructions aren't followed carefully enough by the client. Which may lead to drowning the smart pot tulip whilst the control plant lives.

Execution

The two prototypes were placed at the test locations on Monday. We gave the instructions to the caretakers to observe changes in behavior of the clients. Everyone was exited for the experiment.

The manual of Fleur and the questionaire we prepared to give the caretakers afterwards will be posted in appendix D.

Review of the experiment

The two prototypes were placed at the test locations on a Monday. We instructed the caretakers to observe changes in the behaviour of the clients. Everyone was excited about the experiment.

Unfortunately, the prototype in Veldhoven stopped working after two days due to a problem with the battery/power. Most probably the power bank stopped working, perhaps because of the heat that week which took more power from the power bank than it would have done in a regular week, or maybe there was still a bug in the system which drained the power. The caretakers did not have the correct charger cables to charge the power bank.

The prototype in Roosendaal stopped working after three of the five days. The problem was easily resolved by rebooting the system. But the caretaker in Roosendaal did not understand what I was trying to explain to her. Unfortunately, Roosendaal is too far for us to fix it ourselves. Because of this short testing time, we decided to not use our questionnaire to gather the feedback of the testing week but decided to have a more informal chat at the end of the week.

Despite the unfortunate circumstances, the prototypes had worked five days together. The first thing we learned from these tests is that the battery/power management was unreliable after a few days. When we retrieved the prototypes a mentally disabled person told us that she had a lot of fun with Fleur. She and the other mentally disabled had laughed a lot and she liked the pot very much. The caretakers themselves told us that they enjoyed the experiment although it ended prematurely. The disabled people spend more time on Fleur than on the other plants. Nearly every time it went off the clients went to check out the plant. In these 3 days, it was not really possible to measure any significant change in independence or caring behaviour. The health of the plant stayed the same.

In conclusion, the execution of the experiment did not go as planned, and we probably do not have sufficient data to draw a conclusion on whether Fleur is a product to continue assembling. So as expected more testing and development has to be done. But the initial raw data shows that our target group is largely interested in the product and that they at least enjoyed using it. So this is not the end for Fleur.

Discussion

During such a project there are always things that could have gone better. Some of these things were anticipated and others were not. This section is dedicated to the things that went suboptimal, and how we would improve a second prototype.

Target audience

The first big problem that we encountered had to do with our target audience, namely people with down syndrome. In order to obtain user “preferences and needs” we needed information from these people. Although Down syndrome is not a rare disability (7.7 per 10000 in the Netherlands [21]), we personally do not have contact with anyone suffering from this condition. This is because these people generally have fewer social contacts. So we tried getting in contact with care institutions. This was quite hard since these caretakers told us that they have busy jobs and people generally dislike spending time helping complete strangers when they are busy. Another factor that did not help is that the caretakers are very protective of their clients. Since the clients themselves are not able to properly fend for themselves. When I called these institutions I was usually redirected a few times until somebody did not answer the phone or said the could help us. Lastly, the coronavirus made it impossible for us to visit these places in real life. This would be a easier way to actual meet the disabled people and their caretakers. So in another project, we could think of better ways to get into contact with our target group (or decide upon an easier one during the first stages of development).

User-friendliness

Our system reads out it sensor values every 30 minutes and checks whether those are in range. If they are, it is fine and the system will wait another 30 minutes for the next check. If it is not good if will ask for what it needs, that is water, or more or less sunlight. If it needs help, the user needs to push a button such that it will check every two seconds so that the system can give direct feedback to the user if it is being taken care of. A clear improvement would be that the user doesn’t have to push a button. This way it will cost the user an action less, which makes the product more user-friendly. An implementation could be that the system will automatically check every two seconds when it detects a problem. We chose not to do this, since it will consume a lot more power and the system needed to work for five days with one power bank. Another button-improvement would be that the system would automatically go do deep-sleep mode between certain times. The way the prototype is now put to sleep mode is when there are two buttons pressed simultaneously. We chose to do it the button-way because it was way to time consuming to program a timer on it.

Goals and experiment

Another problem we encountered had to do with our goals and experiment. As a goal, we aimed to add a new joyful activity to the day of people with Down syndrome. The main problem here is the measurability of these results. Due to the coronavirus, we could not be present in persons to judge the effectiveness. And due to the privacy of the users, we also could not install camera’s for example to keep track of how the prototype performs. The result of this is that we had to ask the caretakers to pay attention and all the feedback had to come from questioning those caretakers. This is less than desirable because we want to ask as little as possible from these people since they are already being extremely friendly and helpful by testing our product. Secondly, it increases subjectivity in the results since both prototypes are judged by different observers. This could be solved by perhaps waiting until covid passes or by finding a different target audience that allows us to monitor the experiment ourselves.

An additional problem of the experiment was the test period length. Due to the structure of this course, we could only permit 1 week of testing. This is really short when you want to monitor potential changes in behaviour and the health of plants. Expected changes are minimal in one week, and therefore the results might be inconclusive. We have no good fix for this.

Design

The next thing that we would improve in a new version would be the design of the pot and how the sensors are placed inside. In the current design, the moisture sensor fits into a hole that is halfway down the pot. This was the only way everything would fit in the pot. Making the pot bigger was not an option since we were restricted by the size of the 3d printer and the print time. This low hole caused excess drained water to drip through the hole in the direction of the electronic core. This is obviously a problem. In the prototype, this was fixed by using some tape. But a more ideal permanent solution would be to redesign the pot with a bigger 3d printer. Or by using moisture sensors that are smaller since our model was quick large (8ish cm in length.)

FLEUR now uses a powerbank as the source of power. We didn’t like to option of having a power cable since that would look less nice and would increase the risk of electrocution because we use electronics inside a flowerpot that is filled with water every week (and see the problem of the hole described above). The downside of using a battery is that you have to swap or charges them once in a while. So to minimize that labour and make our system more durable we should use power-efficient component. In the current design the display of the mstack 5 core uses most of the power, our sensors take a measurement once every thirty minutes and each two seconds after the button is pressed, to direct fast feedback). This power consumption is negligible in comparison. So to improve our design and make it run on smaller and fewer batteries we could swap the standard transmissive display for a so-called reflective display, these are the ones that are used in e-readers. These displays only use energy when the projected image on the screen has to be changed. Which is only a handful of times a day in our case. This would decrease our average power consumption allowing for smaller batteries.

3D printed design

The next thing that would need improvement is the design of the pot itself. This can be split in 4 parts: holding the core and the electronics, masking the wiring and placement of the sensors, waterproofing and lastly making the prints. The improvements will be discussed separately.

When it came to holding the core it was chosen to create a pressure fit within its designated socket. This was a good solution at the time since the core had multiple sockets that needed to be used for the sensors, these needed to be free of the structure. In the first design this gap was too tight and the sockets could not be used. In the second design the sockets could be used but the fit of the core was not ideal. The solution would be to make a structure with precise cut-outs where the cables would connect, make this structure separate from the pot so it can be bolted or screwed to the outside. Then make a second slightly bigger enclosure that fits over this structure to hide the wires. This way a secure and tight fit can be ensured for the core, all the wires can be hidden away whilst not compromising the required space.

For the rest of the electronics no specific location was made in order to hold them down. This caused a rattling sound when moving the pot around, in the first design this was compromised due to the size limitations. But if the modification for holding the core would be made, this is a must. Not only will it make the wires more likely to entangle, come lose or even break, but it is also more professional to make sure that everything is securely put in place.

The placement of the sensors can also be improved. Now there is a moisture sensor that is stuck in a hole that is halfway down the pot. This makes for quite a big risk, there is a big flood risk for the electronics if the seal between the pot and the sensor is not good enough. This could be solved by placing the moisture sensor in the top of the pot and making some sort of straw that can be used to reroute the wires into the bottom compartment. This would make sure that the leak risk is completely gone whilst still having no visible wires that can be pulled out by the clients. When it comes to the rest of the wiring, has been done in making channels that can route these wires. It is not a necessity, but it does make sure that the wires become less entangled and thus maintenance will be easier when the pot has to be disassembled.

Lastly there are some improvements when it comes to waterproofing and making the prints. In this design, the only place that was not waterproof from the build plate of the printer was the bottom of the pot, where the plant would be placed in. This was solved by using a layer of epoxy for plastics on the inside and outside. For a build that was completed in 9 weeks a viable option but it is not ideal. It is expensive and not very easy to do on the inside of the pot. A better solution would be some sort of coating that could be sprayed on the outside in order to make it waterproof. Then, there is the water issue around the moisture sensor, as a quick fix a piece of tape was used to get a tighter seal. This is by no means an ideal solution. It would be a lot better to move the sensor or to make some sort of rubber seal, like an O-ring. This would make the seal tighter and it lasts longer than the piece of tape.

For now the prints were made with PLA, this is a reasonable material to use in the spring and summer for this type of project. But it would be better if PET-G was used. PET-G can withstand a higher temperature than PLA and one if its useful properties is that it is hydrophobic. Meaning that in the winter when the central heater is on and the pot is placed above the heater, the pot will not deform due to the heat. This could be the case with PLA. And it would be more waterproof by itself than PLA, and that is not a bad thing when designing a plant pot.

Giving a presentation

When it came time to make the presentation it was important to keep in mind what the focus was on during this project. The focus was not on electronics, software, 3D printing or literary study. The focus was on getting the right message to the people with Down’s syndrome to get them excited to work with FLEUR and to contribute to their daily activities. The electronics, software and 3D printing were a key part but in the end, it was a case of choosing the right tools for the job. In the presentation, this was kept in mind. Many slides were dedicated to how the group would achieve projecting the right message to these people. So slides that included the questionnaires, the meeting we had with a caretaker, the literary study we performed and of course the USEr analysis. This is where the main focus during the presentation had to be in order for us to get our message across to the other groups. In the last couple of slides, attention was given to the ‘tools’ that we used. So the electronics and the 3D printing process. It was important to shed some light on how the information we had received from the caretakers had influenced our decision. So why did we use the Core platform and why choose that particular 3D design for FLEUR. This ultimately showed how we wanted to achieve that people with Down’s syndrome would be not only excited to work with FLEUR, but that it would help them in their daily life. When it came to giving the presentation this went quite well. How we intended to divide the time, despite the fact that we did not complete the whole presentation in 15 min, was achieved. Most of the time went to user interaction and how this was important for us with less time spent on the technical side of the project. In the end, the presentation had everything that the group wanted to share and the presentation can be found in the following link.

https://drive.google.com/drive/folders/1F2kOWIv5RVl4_EYyO0mUUrJ0aGCaT1-m?usp=sharing

References

The following list of literature has been read to gain knowledge of the field of the problem

Sources on existing smart greenhouse control systems

[1] Abbassy, M. M., & Ead, W. M. (2020). Intelligent Greenhouse Management System. 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020. https://doi.org/10.1109/ICACCS48705.2020.9074345 This paper mentions an robotic intelligent greenhouse management system. Which reads out the water level, humidity, and measures the moisture content of the soil based on real-time area data. With arduino components.

[2] Kaneda, Y., Ibayashi, H., Oishi, N., & Mineno, H. (2015). Greenhouse environmental control system based on SW-SVR. Procedia Computer Science, 60(1). https://doi.org/10.1016/j.procs.2015.08.249 This paper includes information about the general design of a greenhouse automatic environment control system.

[3] Kokieva, G. E., Trofimova, V. S., & Fedorov, I. R. (2020). Greenhouse microclimate control. IOP Conference Series: Materials Science and Engineering, 1001(1). https://doi.org/10.1088/1757-899X/1001/1/012136 This paper discusses (the lack of) a mathematical model to control greenhouse temperature and heat transfer.

[4] Kumar, A., Singh, V., Kumar, S., Jaiswal, S. P., & Bhadoria, V. S. (2020). IoT enabled system to monitor and control greenhouse. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.11.040 This paper includes diagrams of arduino (components) and wiring to assemble a greenhouse management system.

[5] Sri Jahnavi, V., & Ahamed, S. F. (2015). Smart wireless sensor network for automated greenhouse. IETE Journal of Research, 61(2). https://doi.org/10.1080/03772063.2014.999834 This source includes information on all types of smart sensors aimed at a smart greenhouse.

[6] Von Borstel, F. D., Suárez, J., De La Rosa, E., & Gutiérrez, J. (2013). Feeding and water monitoring robot in aquaculture greenhouse. Industrial Robot, 40(1). https://doi.org/10.1108/01439911311294219 This paper contains the design of a robotic system to feed aquatic organisms and measure water physicochemical parameters in experimental aquaculture ponds. Our own system is focused on plants but the robotic monitoring of environmental parameters is of interest here.

[7] Zhang, C. (2018). Greenhouse intelligent control system based on microcontroller. AIP Conference Proceedings, 1955. https://doi.org/10.1063/1.5033697 This paper contains a chart with components of a greenhouse control system, including information on the circuitry per module, and a flow chart of how the software should work.

[8] Zhao, R., & Lu, L. (2020). Automatic Temperature and Humidity Detection and Alarm System for Greenhouse. IOP Conference Series: Earth and Environmental Science, 512(1). https://doi.org/10.1088/1755-1315/512/1/012099 This paper designs and implements the monitoring and alarm system of temperature and humidity of a greenhouse.

[9] Carder, C. (2004). Irrigation systems. Rocky Mountain Construction, 85(20), 5. Retrieved from https://search-proquest-com.dianus.libr.tue.nl/trade-journals/irrigation-systems/docview/196317404/se-2?accountid=27128 A paper about the irrigation technology being used currently

[10] Mudiyanti, R. (2019). Design watering system on greenhouse using microcontroller with matrix based. iopscience.iop.org. 1280 022067 This paper is about desiging a watering system on a greenhouse using microcontroller with matrix based

Effect of plant caring on health

[11] Loram, A., Warren, P., Thompson, K., & Gaston, K. (2011). Urban Domestic Gardens: The Effects of Human Interventions on Garden Composition. Environmental Management, 48(4), 808–824. https://doi.org/10.1007/s00267-011-9723-3 This paper talks about how taking care of plants works stress-relieving.

[12] Pedrinolla, A., Tamburin, S., Brasioli, A., Sollima, A., Fonte, C., Muti, E., Smania, N., Schena, F., & Venturelli, M. (2019). An Indoor Therapeutic Garden for Behavioral Symptoms in Alzheimer’s Disease: A Randomized Controlled Trial. Journal of Alzheimer’s Disease, 71(3), 813–823. https://doi.org/10.3233/jad-190394 This paper is about fardening as a therapy for people with Alheimers disease.

[13] George, D. R. (2013). Harvesting the Biopsychosocial Benefits of Community Gardens. American Journal of Public Health, 103(8), e6. https://doi.org/10.2105/ajph.2013.301435 This paper is about how community gardens work for people with other mental illnesses, so it could also work on people with down syndrome.

[14] George, D. R., Kraschnewski, J. L., & Rovniak, L. S. (2011). Public Health Potential of Farmers’ Markets on Medical Center Campuses: A Case Study From Penn State Milton S. Hershey Medical Center. American Journal of Public Health, 101(12), 2226–2232. https://doi.org/10.2105/ajph.2011.300197 This paper is about how farmer-markets work positively on the health of people.

Plants and how to care for them

[15] Weatherley, P. E. (1976). Introduction: water movement through plants. Philosophical Transactions of the Royal Society of London. B, Biological Sciences, 273(927), 435–444. https://doi.org/10.1098/rstb.1976.0023 This paper explains how water movement in plants work.

[16] Chao, D., & Lin, H. (2010). The tricks plants use to reach appropriate light. Science China Life Sciences, 53(8), 916–926. https://doi.org/10.1007/s11427-010-4047-8 This paper explains how plants make sure they get the right amount of light, so not too much and not too little.

[17] Drury, & Sally. (2011). Watering, bedding plants and tubs. Horticulture week, 34. https://search-proquest-com.dianus.libr.tue.nl/trade-journals/watering-bedding-plants-tubs/docview/872335545/se-2?accountid=27128 This paper explains when it is the best time of day to water certain plants.

[18] Rogers, P. (1993). Watering is crucial to plants: [ALL Edition]. Telegram & Gazette, G1. https://search-proquest-com.dianus.libr.tue.nl/newspapers/watering-is-crucial-plants/docview/268517145/se-2?accountid=27128 This paper explains why it is important that plants get the right amount of water.

[19] Vanderbilt, V., & Grant, L. (1985). Plant Canopy Specular Reflectance Model. IEEE Transactions on Geoscience and Remote Sensing, GE-23(5), 722–730. https://doi.org/10.1109/tgrs.1985.289390 A model for the amount of light specularly reflected and polarised by a plant.

[20] Roberts, E., & Burleigh, M. (2010). Watering Systems for Success in Growing Plants, Using Low pH and Ammonium Nitrogen. Cactus and Succulent Journal, 82(6), 266–275. https://doi.org/10.2985/0007-9367-82.6.266 The paper describes what changes should be made to the water that is used in the system in order to get the best results.

The syndrome of Down

[21] Angela P. Presson, Ginger Partyka, … Edward R.B. McCabe, Current Estimate of Down Syndrome Population Prevalence in the United States, The Journal of Pediatrics, Volume 163, Issue 4, 2013, Pages 1163-1168, ISSN 0022-3476, https://doi.org/10.1016/j.jpeds.2013.06.013. A paper about how often the syndrome of down occurs

[22] Robert A. Catalano, Down syndrome, Survey of Ophthalmology, Volume 34, Issue 5, 1990, Pages 385-398, ISSN 0039-6257, https://doi.org/10.1016/0039-6257(90)90116-D. This paper goes really deep into what the syndrome of down actually is

[23] Mark Selikowitz. Down Syndrome. Vol 3rd ed. OUP Oxford; 2008. Accessed April 22, 2021. http://search.ebscohost.com/login.aspx?direct=true&db=nlebk&AN=467605&site=ehost-live This paper is about raising children with down syndrome

[24] Chapman, Robin & Seung, Hye-Kyeung & Schwartz, Scott & Bird, Elizabeth. (2000). Predicting Language Production in Children and Adolescents With Down Syndrome. Journal of speech, language, and hearing research: JSLHR. 43. 340-50. 10.1044/jslhr.4302.340. This paper is about the language skills of adolescents with down syndrome.

Other sources

[25] Wieseler, N. A., Hanson, R. H., Chamberlain, T. P., & Thompson, T. (1988). Stereotypic behavior of mentally retarded adults adjunctive to a positive reinforcement schedule. Research in Developmental Disabilities, 9(4), 393–403. https://doi.org/10.1016/0891-4222(88)90033-9 A paper about a study which evaluated the indirect effects on stereotypic frequency when the value of a concurrent fixed-interval reinforcement schedule for adaptive behaviour was varied. 13

[26] Vijendra Babu, D. (2020). Automatic Irrigation Systems for Efficient usage of Water using Embedded Control Systems. 993 012077 A paper about a similar project being done

[27] Gafni, V. (1999). Robots: A Real-Time Systems Architectural Style. ACM SIGSOFT Software Engineering Notes, 24(6), 1–18. https://doi.org/10.1145/318774.318786 This paper gives a broad description of what robots are

Appendix A

The plan and task-division per week including a logbook of the work that was done per person of the group is listed below.

Week 1

  • Brainstorming about possible subjects (all)
  • Make this planning/approach (Bert, Nando)
  • Finding relevant papers (state-of-the-art) (all)
  • Deciding on a specific user (all)
  • Research about how this product will benefit the users (all)
Name Total hours Tasks
Marijn 10 Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)
Bert 10 Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)
Nando 10 Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)
Dorien 10 Group formation (0.5h), lectures (0.5h), research about interesting subjects (3h), researching papers about the subject (4h), edited the wiki (2h)

Week 2

  • Literature study (all)
  • Contacting care homes for information (Nando, Dorien)
  • Starting the USEr section on the wiki (Marijn)
  • Listing needs of people with Down syndrome (Marijn, Dorien)
  • Research about suitable hardware (Nando, Bert)
  • making a RPC list (Dorien, Marijn)
  • Design an electrical circuit (Bert)
Name Total hours Tasks
Marijn 10 Meetings (4h), improving the users/society/enterprise section (1h), literature study into the needs of people with DS (2h), improving our schedule and gathering action points for this week (1h), redefining our goals and thinking about a way to test those (2h)
Bert 9 Meetings (4.5h), research about components (2h), designing possible electrical circuit (0.5h), thinking about questions we want to ask caretakers (2h)
Nando 13 Meetings (4.5h), improving the approach section (0.5h), literary study into similar systems that already exist (4h), meeting with a caretaker and processing the results (4h)
Dorien 9.5 Meetings (4.5h), literary study into the approach of people with DS (2h), prepare questions to healthcare institutions (2h), prepare mails and calls to healthcare institutions (1h)

Week 3

  • Research about the components and ordering them (Nando, Dorien)
  • Adjusting the planning (Dorien)
  • Making the CAD design of the 3D printed pot (Nando)
  • Working on the code (Bert)
  • Designing the experiment (Marijn)
  • Revising RPC list (Nando, Marijn)
  • Extending the approach section on the wiki (Dorien)
  • Making the BoM (Dorien)
Name Total hours Tasks
Marijn 10.5 Meetings (5h), writing the goals section (1.5h), writing the hypothesis section (1h), writing the experiment section (1h), writing the questionnaire (1h), writing the RPC list (1h).
Bert 11 Meetings (5h), contacting care facilities (2h), research about the M5Stack (2h), research about how the programming works (2h)
Nando 9 Meetings (5h), research about components and order them (2h), working on the CAD design (2h)
Dorien 11 Meetings (5h), research about components and order them (2h), make BoM (1h), adjust planning including test week (1h), extend the approach section (2h)

Week 4

  • Design the pot for 3d-printing (Nando)
  • Picking up the components of the system (Dorien)
  • Coding the core (Bert)
  • Contacting users and documenting various activities in the wiki (Marijn)
Name Total hours Tasks
Marijn 11 Meetings (4h), making the email with questionnaire for hypothetical use (3h), gathering email addresses of as many care homes as possible(1h), sending all the mails (0.5h), updating the RPC list with interface/interaction (0.5h), making a storyboard for the promotion video (1.5h), exploring possible names for the system (0.5h)
Bert 16 Meetings (4h), getting the M5Stack working (2h), coding the M5Stack (10h)
Nando 14 Meetings (4h), making the design in NX (7h), researching the plastics needed for 3d printing (1.5h), setting up the 3d printer/starting the prints (1.5h)
Dorien 8 Meetings (4h), picking up the components and getting the M5Stack working (4h)

Week 5

  • Continue working on the code (Bert, Dorien)
  • Continue working on the 3d-printing process (Nando)
  • Writing varies section in the wiki (Marijn)
  • Getting more replies to our questionnaire (Marijn)
Name Total hours Tasks
Marijn 13 Meetings (5h), writing the section about branding (0.5h), updating the questionnaire section and writing the reply section (2h), creating a plan for the next two weeks and gathering action-points and diving the work (1h), start writing the discussion (1.5h), calling and then remailing as many contact points as possible (3h)
Bert 12 Meetings (5h), working on the code (7h)
Nando 11 Meetings (4h), troubleshooting the 3D printer(4h), adjusting the 3D model(2h), starting the prints/getting the right slicer settings(1h)
Dorien 11 meetings (5h), connecting the M5Stack Core (2h), working on the code (4h)

Week 6

  • Working on the code (Dorien, Bert)
  • Troubleshooting 3d-printing problems (Nando)
  • Perfectionalizing the hardware
  • Working in the wiki (Marijn)
  • Finding care institutions who have people with downsyndrome and want to test a pot (Marijn)
Name Total hours Tasks
Marijn 7.5 Meetings (4h), updating the results section from calling and mailing (0.5h), cleaning up our group’s shared notes and making a list of all steps required to finish this project (0.5h), making a table with questionnaire responses and updating the results section (1.5u), mailing back and forth to come to an agreement on the testing period (1h)
Bert 11 Meetings (4h), programming (5h), contacting care facilities (2h)
Nando 10 Meetings (4h), troubleshooting the printer (1h), explaining the process of designing/making the print (3h), post-processing the printed pot (2h)
Dorien 10h Meetings (4h), trying to program of the clock (6h)

Week 7

  • Finalising Agreements about the test period (Marijn)
  • Debugging the code (Marijn, ...)
  • Shooting a promotion video/demo (Marijn)
Name Total hours Tasks
Marijn 16.5 Meetings (4h), mailing and calling to come to an agreement on the testing period (1.5h), picking up the components from different group members (1.5h), installing and testing the core firmware in my own laptop (2h), debugging the code (4h), assembling and adjusting components (2.5h), shooting and transferring footage for the promotion demo (1h)
Bert 10.5 Meetings(4h), delivering components to Dorien(1.5h), programming(5h)
Nando 10.h meetings(3h), getting a new 3D printer(3h), making changes to the design for the new printer(1h), meeting explaining the design for the printer(1.5h), working on the wiki(2h)
Dorien 14 Meetings (4h), programming (10h)

Week 8

  • Editing the promotion video (Marijn)
  • Debugging the code (Marijn, Dorien)
  • Preparing for the testing period (Marijn, Dorien)
  • Assembling and testing the 2 prototypes (Marijn)
  • Finishing the presentation (all)
Name Total hours Tasks
Marijn 22.5 Meetings (4h), working with Dorien on campus (3h), mailing and calling to come to an agreement on the testing period (1h), waterproofing the system as a whole (0.5h), debugging the code (6h), editing the promotion demo (2.5h), testing the pot myself to find bugs and to finding good threshold values (1h), getting a real flower for the testing at sdw (0.5h), making the manual (0.5h), working on the presentation (3.5h)
Bert 8 Meetings(4h), debugging the code(1h), checking code and trying things(3h)
Nando 9 Meetings(3h), working on the final presentation(4h), preparing for the presentation(2h)
Dorien 15 Meetings (4h), working with Marijn on campus (3h), debugging the code (6h), prepared the presentation (2h)

Week 9

  • Finishing the wiki (all)
  • Giving the final presentation (Dorien, Marijn, Nando)
  • Processing the results of the test week (Marijn, Dorien)
Name Total hours Tasks
Marijn 13.5 Delivering and retrieving the prototype to SDW Roosendaal (3h), giving/watching presentations (2h), redesign the layout and bringing more structure to the wiki (1h), editing the wiki (6h), uploading the changes made by other group members who cannot access the wiki, and reformatting (1.5h)
Bert 6 Editing the wiki (4h), reading through the wiki (2h)
Nando 6 Giving/preparing the presentation (2h), working on the wiki(4h)
Dorien 15 delivering and retrieving the prototype to Veldhoven (5h), giving/watching presentations (2h), editing the wiki (8h)

Appendix B

This was the mail that was send to the care houses in order to broaden our perspective on the needs and preferences of people with Down Syndrome

Email with a questionnaire for hypothetical use

Beste meneer/mevrouw,

Wij zijn een project groep aan de technische universiteit Eindhoven die bezig is met het ontwikkelen van een slimme plantenpot voor mensen met een verstandelijke beperking. Ons systeem moet het verzorgen van een plantje eenvoudiger en leuker maken om zo de dagbesteding en zelfstandigheid van deze mensen positief te beïnvloeden. Om tot het beste ontwerp te komen zijn wij meningen aan het verzamelen van mensen met ervaring in het vakgebied. Wij zouden enorm geholpen zijn als u kort uw mening zou willen geven over ons concept. In de bijlage vind u een korte beschrijving van ons systeem en 4 stellingen waar u een mening dient te omcirkelen, dit alles zal maar 5 tot 10 minuten duren. De antwoorden zullen alleen gebruikt worden ter sturing van het ontwerp proces en we zijn niet geïnteresseerd in persoonlijke gegevens van wat voor vorm dan ook. Als u vragen heeft of meer wilt weten over ons concept beantwoord ik ze graag.

Alvast bedankt en met vriendelijk groet,

Namens de gehele project groep,

Marijn Borghouts


Bijlage

Deze bijlage bevat een korte uitleg over ons concept, opgevolgd door een vragenlijst met slechts 4 stellingen en wat ruimte voor algemene opmerkingen. Ons concept Planten in huis zorgen voor een leuk aanzicht en voor frisse lucht. Daarnaast kan het verzorgen van planten voor mensen met een verstandelijke beperking goed zijn voor het ontwikkelen van een zorgzaam karakter en het leren volgen van tijdsgebonden routine. Aangezien een plant in een potje met enige regelmaat water nodig heeft. Ons ontwerp beoogt deze positieve effecten van het verzorgen van planten te behouden terwijl het eventuele drempels uit de weg neemt. Daarom hebben wij een slimme plantenpot ontworpen. Deze pot houdt met sensoren de vochtigheid van de grond bij en de hoeveelheid zonlicht die er op de pot schijnt. Aan de hand van deze gegevens bepaalt de pot zelf wanneer het tijd is om de plant die er in zit water te geven of wanneer deze in of uit de zon moet. De pot doet dit door op een vriendelijke en positieve manier te communiceren met zijn omgeving. De pot beschikt over een speaker, led-lampjes, en een schermpje om zo op verschillende manier de aandacht van iemand in zijn omgeving te trekken. De pot zal dus bijvoorbeeld hardop zeggen dat hij dorst heeft en graag een beetje water wil. Daarbij knipperen er dan blauwe lampjes en is het symbool van een gieter te zien op de pot. Doordat de pot duidelijke korte commando’s geeft en daarna de gebruiker bedankt bij een volbrachte taak hopen wij betrokkenheid en plezier bij de verzorging te vergroten, en de persoon in kwestie zelfstandiger te maken. Aangezien de slimme pot zelf de gebruiker aanstuurt zou dit een klein deel van de werkdruk op de verzorgers kunnen wegnemen.


Vragenlijst

Bij elke stelling dient u één antwoord wat van toepassing is te omcirkelen. Daarnaast is er open ruimte om uw menig te geven of uw antwoordt toe te lichten. Alle feedback is welkom, ook kritische uiteraard. We hebben liever te veel dan te weinig informatie dus wees niet terughoudend.

Stelling 1)

Ik zie de voordelen (zelfstandigheid, dagbesteding, zorgzaamheid) van een slimme pot voor de cliënten in mijn instelling.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor uw mening over de voordelen)


Stelling 2)

Ik denk dat mijn cliënten meer tijd zouden besteden met een slimme pot dan met een normaal plantje.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor uw mening over de besteedde tijd)


Stelling 3)

Ik verwacht dat mijn cliënten de slimme plantenpot in de benoemde vorm zelfstandig(er) kunnen verzorgen dan een normaal plantje.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor uw mening over zelfstandigheid)


Stelling 4)

Ik verwacht dat mijn cliënten meer plezier ervaren in het verzorgen van een plantje als deze een stem heeft een positieve feedback geeft.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor uw mening over het gebruiksplezier)


Afsluitende vraag)

Eerst willen we u nogmaals bedanken voor uw tijd en mening. Als laatste willen wij u vragen of u eventueel interesse heeft om een eerste prototype van dit ontwerp (gehaal gratis) gedurende een week uit te testen. JA // NEE

Als dat het geval is kunnen we hier nog nader contact over hebben. Uw antwoorden en eventuele vragen kunt u terug sturen naar dit e-mailadres (m.m.borghouts@student.tue.nl)

Met vriendelijke groet,

Marijn Borghouts

Results of the questionnaire

This questionnaire was sent out as an email on Thursday the 13th of May to 13 new, not yet approached, care institutions that were located in Brabant or Limburg. Unfortunately, we immediately got an automated reply that said that one of the persons we were trying to contact was on holiday. That was when we realized that our mails had been sent in the May holiday and that there was a chance that our mail would be far down in the recipient's inbox by the time somebody starts working again. We decided to wait until Wednesday the 19th to see if we would get a reaction. Unfortunately, we did not receive a single one. So on that Wednesday morning, we decided to call as many institutions as possible, you can see the results below. Unfortunately after 3h of work, we still had zero actual replies.

After a small pep talk from René van Molengraft, we spent some extra time and effort on the most promising leads. Eventually I got four filled out questionnaires in my mailbox. Of which three people were interested in helping us test the prototype. So the next step will be to make at least 2 final appointments to test in week 7 or week 8 if necessary. The respondents are: 1)Tineke eulderink from Kern Eindhoven. She was interested in testing with us. 2)Tanja dekker from ASVZ-Eureka- Caretechnology en innovation. She was interested in testing with us. She works in multiple locations in Brabant. 3) Vincent Rijpert from SDW Roosendaal. He was not interested in testing with us. 4) Malu Coppens from SDW Roosendaal. She was interesting in testing with us.

Eventually, we were able to find 2 test locations to test FLEUR, we will therefore leave FLEUR for an entire week at the test location and we will give the care takers a different questionnaire after that week.

Tabellen.png

Tabellen2.png

Conclusion

Getting in contact with mentally disabled people and their caretakers has proven to be very difficult over the phone. The bigger institutions have receptionists that answer the phone and they don’t have knowledge about the actual caring that happens in these institutions. While the smaller ones are more likely not to answer the phone. Luckily persistence pays off. In the end, we got 4 replies of which 3 people were positive about our design ideas and were willing to test with us. This proves that our target audience likes our idea and that there is a potentially good product here. One of the 4 was less enthusiastic but his feedback is perhaps even more valuable. We learned that FLEUR will likely not work for all persons with Down syndrome since the degree of mental impairedness varies greatly within this target group. Now, all we can do is hope for a fruitful testing week and useful feedback.

Appendix C

Questionaire answers from a caretaker and personal friend

In order to get a deeper understanding of how people with Down's syndrome would or could react to our project contact was sought with a caretaker. This caretaker has around 10 years of experience with these particular patients, which means that the answers to the questions are useful to the project at hand. In the following text first the questions will be posed after which the answers are written. Lastly, some extra pointers given by the caretaker will be mentioned.

Q) What would people with Down's syndrome need in daily life that this plant can help with? (To combat boredom for example)

A) Becoming more independent, that is a hot item at the moment. Caretakers want their patients to be able to live as long as possible on their own.

Q) Do you think that our project can improve their daily life?

A) Not only do plants make sure that there is cleaner/better quality of air in the patient's room but they also get thought to take care of the plant in a creative and playful manner.

Q) Do you think that our project would need to get more functions?

A) Only sound might not be enough, it can become quite noisy in care homes. But these patients also react very well to a combination of visual and auditive stimulation. The visual stimulation does not need to be complicated, colors would suffice, so for example a yellow light means more sunlight or a blue light means more water. This way they also get a more satisfactory feeling in the long run. These patients also forget general tasks quite a bit, this would be giving water in regular intervals, for example, a solution would be the use of so-called 'pictokaarten' and a weekly schedule. These pictokaarten are designed to not give any confusion on the action that has to be taken and the weekly schedule gives them a place where they can easily find the tasks that have to be done on a certain day. Direct tasks, for example, more sunlight, would be perfect in a visual/auditive stimulation.

Q) What would be the best way for our project to approach people with Down's syndrome?

A) The best way to approach them is in a positive and cheerful way yet the message has to be simple and clear, and thank/compliment them if they performed the task well. For our project the following 3 suggestions were given: 1. 'I am thirsty, could you give me some water?', 'Thank you, now I am not thirsty anymore.' 2. 'I am quite hot, would you mind placing me in the shade?', 'Now I am nice and cool, thank you.' 3. 'I am quite cold, would you mind placing me in the sun?', 'Thank you, now I am not cold anymore.' What might help the patients, in the long run, is some sort of checklist, these already get used now to see if they keep getting a better understanding of the tasks they are performing. This checklist could ask what colour lamp has what meaning, for example, this can then be executed with their caretaker.

Some general remarks

  • People with Down's syndrome have different levels of mental capabilities depending on their IQ. The caretaker mentioned that our project would work best with patients that have the same mental capabilities as 6-10-year-olds. Some level of understanding is needed since we are trying to learn them to care.
  • They love cables that they can see. These have to be tucked away, it might not harm them but they will pull on them.
  • The site botsbegleiding.nl(teach) can be used as a useful source, it officially is a site for autism but the thought processes are quite the same as those we can use.

 

Appendix D

The manual as well as the prepared questionnaire will be in Dutch, since the caretakers were Dutch and we did not expect them to fill in this questions in English

Manual

Fleur meet om de 30 minuten of er genoeg water en zon is. Dit gaat volledig automatisch.

1) Actieve feedback

Als men per direct wil weten hoe met het plantje gaat kan men op de linker knop drukken. Dan vind er instantaan een meting plaats. Dit kan men gebruiken om na het water geven te checken of de plant weer blij is. Er wordt dan een groen licht gepresenteerd en een deuntje afgespeeld.


2) Slaapstand

Fleur werkt op baterijen. Om Fleur zo lang mogelijk mee te laten gaan kan Fleur ‘s nachts in slaapstand worden gezet. Dit doet men door tegelijk op de middelste en rechter knop te drukken. Hierdoor zal Fleur 12 uur lang in slaapstand gaan. Na die twaalf uur start Fleur weer helemaal vanzelf op. Men hoeft hem dus alleen ’s avonds uit te zetten, het aanzetten gaat vanzelf. (Als men Fleur toch eerder dan 12 uur uit de slaapstand wil halen, moet men het deksel van de pot voorzichtig afnemen en éénmaal op het rode knopje aan de zijkant van het schermpje drukken.)


3) Water geven

Let op! Omdat de hoeveelheid potgrond in de plantenbak erg klein is behoeft het plantje maar erg weinig water per keer. Waarschijnlijk is een paar eetlepels voldoende. Het kan even duren voordat het water is verspreid in de potgrond. Daarom kan het dus ook even duren voordat de sensor registreert dat er water is gegeven.


4) Kleine cijfertje

Op het schermpje van de pot staat onderin “vochtigheid” en “licht” gevolgd door een getalletje. Dit zijn de waardes die de sensoren uitleest. Deze zijn niet echt van belang voor de gebruiker maar maakt het voor ons veel makkelijker om te zien wat er gebeurd in de pot. Een hoge waarde betekent dat het donker is of dat het droog is. Een lage waarde betekent dat het licht of nat is.


5) Onverwachte problemen

De meeste problemen zouden moeten worden opgelost door het systeem te resetten. Dit doet men door het deksel van de pot voorzichtig af te nemen en éénmaal op het rode knopje aan de zijkant van het schermpje te drukken. Heeft dit geen effect? Neem dan contact met een van de studenten op.


6) Contact

Heeft u vragen of problemen kunt u kunt u altijd contact met ons opnemen.

Marijn Borghouts; Email m.m.borghouts@student.tue.nl

Dorien Duyndam; Email d.a.duyndam@student.tue.nl

We placed our mobile numbers as well as mailadresses, but because of the invasion of our privacy we will only post our mailadresses here

Questionnaire after prototype use // Feedback after the tests

Although we did not execute this last questionnaire, we still did prepare it so it is worth sharing

It is important to keep the questionnaire short with only the most vital questions. The caretakers are voluntary helping us by spending their time using our product and answer our questions. We do not want to burden them or scare them off. Secondly, we think that it would be better to have a few complete and carefully answered vital questions instead of 30 questions that are answered minimally.


Beste …,

Nogmaals bedankt voor uw medewerking. Afgelopen week hebben u en uw cliënten onze slimme pot getest. Hieronder bevindt zich een korte vragenlijst met 8 stellingen over jullie ervaring met de slimme pot. Het invullen zal ongeveer XX minuten duren. Wij zullen deze resultaten alleen gebruiken om te beoordelen of ons prototype heeft voldaan aan vooraf vastgestelde doelen, en wat er bij een volgende uitvoering eventueel verbetert kan worden. Enkel wij als project groepje en onze supervisors zullen de antwoorden lezen en we zijn niet geïnteresseerd in privé gegevens zoals namen.

Bij elke stelling dient u één antwoord wat van toepassing is te omcirkelen. Daarnaast is er open ruimte om uw menig te geven of uw antwoordt toe te lichten. Alle feedback is welkom, ook kritische uiteraard. We hebben liever te veel dan te weinig informatie dus wees niet terughoudend.


Stelling 1)

De installatie van de slimme pot was een prettige procedure.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over de installatie procedure)


Stelling 2)

Mijn cliënten hebben meer tijd besteed met de slimme pot dan met de controle tulp.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over de besteedde tijd)


Stelling 3)

De slimme pot voegt wat toe aan de dagbesteding van mijn cliënten t.o.v. de controle pot.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over de dagbesteding)


Stelling 4)

Mijn cliënten kunnen de slimme pot zelfstandiger verzorgen dan de controle pot.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over zelfstandigheid)


Stelling 5)

Omdat de slimme pot zelf de cliënten aanstuurt, heb ik meer tijd over voor andere zaken.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over de tijdsbesparing)


Stelling 6)

Mijn cliënten vonden het gebruik van de slimme pot leuker dan van de controle tulp.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over het gebruiksplezier)


Stelling 7)

Het gebruik van de slimme pot wekt zorgzaam gedrag op in mijn cliënten t.o.v. de controle pot.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over zorgzaamheid)


Stelling 8)

Mijn algemene ervaring met de slimme pot is positief.

Sterk oneens // Oneens // Neutraal // Eens // Sterk eens

Open ruimte voor feedback over de algemene ervaring)

Retrieved from "https://dsdwiki.wtb.tue.nl/index.php?title=PRE2020_4_Group6&oldid=117821"