Mobile Robot Control 2024 HAL-9000

From Control Systems Technology Group
Jump to navigation Jump to search

Group members:

Caption
Name student ID
Salim Achaoui 1502670
Luis Ponce Pacheco 2109417
Nienke van Hemmen 1459570
Mohamed Elbehery 1035058
Aniek Wigman 1463535
Max Hage 1246704
Max van der Donk 1241769

Exercise 1: Non-crashing robot

For the first exercise, the goal was to ensure that the robot does not move through walls in the simulation and not crash into the walls in both the simulation and the real world. To solve this matter, there were multiple solutions. The first solution collects all of the data from the lasers and stops the robot when it reaches a wall. A second solution also uses this notion but instead of stopping the robot, the robot turns away from the wall. These solutions were then tested on the robot in real life. After testing, it became clear that, although stopping the robot was not an issue, the robot was not able to move along a wall in parallel. This issue occurred since the sensor data was taken uniformly. So on all sides, the robot would stop with the same threshold. Therefore, a third solution was made that took the orientation of the sensor data into account for the robot to move alongside a wall. The details of the solutions will now be covered in more detail.

Solution 1

For the first solution, we utilize the laser data that the robot has. This contains data as to how far a wall or object is to the robot at a certain angle. For each angle, we check whether the robot is too close to an obstacle, thus within range x. If it is, it stops moving. Else, it keeps on going forward.

Solution 2

For the second solution, the first solution was expanded. Instead of just stopping, the robot now rotates until no obstacle is close to the robot anymore, and it moves forward again.

Solution 3

This solution is also an expansion of solution 1. In this expansion, the size of the robot is taken into account aswell. This solution was created after testing the robot physically. We came to the realisation that the size of the robot is not taken into account. Therefore, in the script an offset was included such that the body of the robot does not bump into the wall. using the line: scan.ranges[i] < minDist + robotWidth*abs(sin(currentAngle) we introduce an offset by adding the sinusoid of the current angle, which is approximately the circular body of the robot. Because the laser of the robot is approximately in the middle of its body, the sinusoid creates a proper offset to not bump into a wall anymore.

Exercise 2: Local Navigation

For local navigation, 2 different solutions had to be introduced for the restaurant scenario. We have chosen for artificial potential fields and vector field histograms because these solutions seemed the most robust to us. In this parahraph the 2 solutions will be explained.

Artificial potential fields

Artificial potential fields are self-explanatory: they portray the potential fields around an object. A field can either be repulsive or attractive. The reason for being artificial is because these fields do not exist in the real world. In the real world, an object does not push the robot away or pull the robot towards it. In a simulation, however, artificial potential fields can be drawn such that a robot avoids certain objects and gravitates toward others. In this particular case, the robot is drawn towards the goal and repulsed by obstacles that are in its way. The distance between the robot and the goal or obstacle dictates the strength of the field around it. When an obstacle is close, for example, the repulsion force should be higher than the attraction force and high enough to repulse the robot away from the obstacle. This dependency on distance can be seen in the formulas for the two fields. For the implementation, the following source was used: [1]

The artificial attraction potential is dependent on an attraction constant and the distance between the robot and the goal.

[math]\displaystyle{ U_{\text{att}}(x) = \frac{1}{2} k_{\text{attr}} \rho^2 (X, X_g) }[/math]

With the following:

  • [math]\displaystyle{ K }[/math]: positive scaling factor.
  • [math]\displaystyle{ X }[/math]: position of the robot.
  • [math]\displaystyle{ X_g }[/math]: goal of the robot.
  • [math]\displaystyle{ \rho(X, X_g) = \| X_g - X \| }[/math]: distance from robot to goal.

This is used in superposition with the repulsion field created with the following formulas:

The repulsive potential field is described by:

[math]\displaystyle{ U_{\text{rep}}(X) = \begin{cases} \frac{1}{2} \eta \left( \frac{1}{\rho(X, X_0)} - \frac{1}{\rho_0} \right)^2 & \text{if } \rho(X, X_0) \leq \rho_0 \\ 0 & \text{if } \rho(X, X_0) \gt \rho_0 \end{cases} }[/math]

  • [math]\displaystyle{ \eta \gt 0 }[/math]: positive scaling factor.
  • [math]\displaystyle{ \rho(X, X_0) }[/math]: the minimum distance (robot and obstacles).
  • [math]\displaystyle{ \rho_0 }[/math]: distance influence imposed by obstacles; its value depends on the condition of the obstacle and the goal point of the robot, and is usually less than half the distances between the obstacles or shortest length from the destination to the obstacles.

Using these formulas, the following artificial potential fields were created for all maps.

Potential Fields maps.png

From this figure, the weakness of the artificial potential method becomes apparent: the 'local minimum' problem. This causes the robot to get stuck in places were the minimum potential does not result in a path towards the goal. There are methods to try and deal with them, but this is a fundamental problem with the technique.

For the implementation, not [math]\displaystyle{ U }[/math] is used but [math]\displaystyle{ F }[/math] to drive the robot into the direction of the potential: The attractive potential field function is described by:

[math]\displaystyle{ F_{\text{att}} = - \nabla [U_{\text{att}}(X)] = - k \rho (X, X_g) }[/math]

The repulsive force field is described by:

[math]\displaystyle{ F_{\text{rep}} = \nabla [U_{\text{rep}}(X)] }[/math]

[math]\displaystyle{ F_{\text{rep}}(X) = \begin{cases} \eta \left( \frac{1}{\rho(X, X_0)} - \frac{1}{\rho_0} \right) \frac{1}{\rho^2(X, X_0)} \hat{\rho}(X, X_0) & \text{if } \rho(X, X_0) \leq \rho_0 \\ 0 & \text{if } \rho(X, X_0) \gt \rho_0 \end{cases} }[/math]

The added problem is that the robot cannot drive in any direction at any time. Therefore we have programmed it such that it rotates towards the direction before driving it with the force amplitude calculated.

In the figures bellow it can be seen how the artificial potential field method performed on the given maps.



Artificial potential field testes on map 1. The robot is stuck on a local minima. The robot is repulsed by the obstacle making it turn 180 degrees. After it, the robot is no longer repulsed by the obstacle, but attracted by the goal. Since the robot is in a new position, it manages to avoid the local minima, and avoid the obstacle, finally reaching the goal.
Artificial potential field testes on map 2. After passing the first obstacle as in map 1, the direction of the robot was influenced by the two obstacles on the robot's sides. However, the attraction force was strong enough to guide the robot to the goal.
Artificial potential field testes on map 3. The robot manages to avoid the first two obstacles, the first on the left of the robot, and the second on the right. However, the robot did not manage to avoid the third obstacle and got stuck on the local minima. The robot did not manage to adjust its position as in map 1 because the second obstacle influenced the robot's direction, forcing it to go back to the local minima.
Artificial potential field testes on map 4. The robot avoided the first two obstacles located on its left and in front of it. However, the robot got stuck after it. The robot had to pass by a narrow passage, where it was influenced by the repulsion forces of the obstacles. The robot did not manage to pass the narrow passages as in map 2 because the attraction force pointed to one of the obstacles, but not to a free space.



Answers to Questions Artificial Potential Field

  1. What are the advantages and disadvantages of your solutions?

    Advantages:

    • Simplicity in implementation and understanding.
    • Effective for basic obstacle avoidance and goal seeking.

    Disadvantages:

    • Susceptible to local minima, where the robot can get stuck.
    • Not effective in highly dynamic or complex environments.
  2. What are possible scenarios which can result in failures (crashes, movements in the wrong direction, ...) for each implementation?
    • For example, set the target position in an obstacle and let the robot try to get to the target; what happens? The robot may get stuck or oscillate around the obstacle.
    • Another example: Narrow passages can cause the robot to get stuck due to strong repulsive forces from both sides.
  3. How would you prevent these scenarios from happening?

    Possible solutions include:

    • Implementing a path planner that re-evaluates the route if the robot gets stuck.
    • Using a combination of potential fields and other algorithms like A* or Dijkstra’s algorithm for global path planning.
    • Introducing randomness or perturbations in the path to escape local minima.
  4. For the final challenge, you will have to link local and global navigation. The global planner will provide a list of (x, y) (or (x, y, θ) ) positions to visit. How could these two algorithms be combined?

    The combination could be implemented as follows:

    • The global planner (e.g., A* algorithm) calculates a rough path from the start to the goal.
    • The local planner (artificial potential fields) is used to avoid obstacles and refine the path by guiding the robot between the waypoints provided by the global planner.
    • This hybrid approach ensures that the robot follows an efficient path while dynamically avoiding unforeseen obstacles.

Vector Field Histogram

Vector Field Histograms is a method to locally navigate through a space. It uses a map matrix and a polar histogram to determine where the robot can move to get to the goal. The map matrix stores cells which say that they are either occupied or not. The value in those squares then indicate the certainty that the cell is an obstacle. This map moves with the robot as an active window, where the cells in the map matrix are constantly updated just like the polar histogram which is based on the map matrix. Using the laser data of the robot, the height of the bins of the polar is determined and it is smoothed. Finally, a valley between the curves is chosen to move towards to.

Summarizing, for vector field histograms, 2 major components had to be created. Firstly, the translation from the laser data to a map that contains the coordinates of the obstacles together with a certainty value and a polar histogram, from which a minima should be chosen as direction to continue moving. These components will be explained now. Note that the x, y and angle of the robot are kept track of globally.

Obstacle map

The obstacle map is created by defining a matrix OccupancyGridMap with the height and width of the active window. Since each run items more in the map, we clear the map at the beginning of the run. Then, we look at the laser data and compute the coordinates of the obstacle using the distance retrieved from the laser data and the angle we globally keep track of.

[math]\displaystyle{ x = \frac{\sin(\theta) \cdot laser_data[i}{CELL_SIZE} }[/math]

[math]\displaystyle{ y = \frac{\cos(\theta) \cdot laser_data[i]}{CELL_SIZE} }[/math]

Using these coordinates, in the map, the distance of the robot to the wall is put to indicate the risk factor. This value is then normalized to be in range [1,10] . This is then visualized as the following:

Map 2 polar histogram.png
Robot visualization.png








Polar Histogram

  1. Matoui, F., Naceur, A. M., & Boussaid, B. (2015). Local minimum solution for the potential field method in multiple robot motion planning task. Conference Paper presented at the 2015 IEEE/ACIS 14th International Conference on Computer and Information Science (ICIS). doi:10.1109/STA.2015.7505223. Retrieved from [ResearchGate](https://www.researchgate.net/publication/307799899).